Have anyone experiencing power lost? - Touch HD Windows Mobile ROM Development

With different custom roms, I experience very lag system and with very fast power lost. The device getting hot and less responsive. Even after reset (complete power down and restart), the system is slow. And it will use up 50% of power in an hour (without 3G / wifi / bluetooth).
Any idea on how to debug?
Thanks.

After HardReset? All Cookers suggest to make HardReset after flash; sometime they suggest to flash official ROM then Reflash the Cooked (some files after multiple flashing could bring some conflict, official ROM erase all of they).
D'rath

I don't think hard reset is a viable solution every time this happened.

No solution but I tell you to try:
1- Flash Official ROM
2- Make HR
3- Flash Cooked ROM
4- Make HR
5- Use device to see if you have solved problems (also install few apps, sometime problems isn't by ROMs).
If it doesn't solve then HTC Warranty ^^
D'rath

I am pretty sure it is a software issue.
And HR really doesn't make sense to me (as I did try sometimes before)
Could it be the reason that it always trying to establish internet connection but can't? I did just remove my SIM card yesterday.

leaving my phone on and wifi on AC plugged for an hour do solve the problem.
It is now responsive again.

Now I am suspecting the version of SPL makes the difference.
my stock SPL is 1.54 and I uses USPL 2.5 to flash new rom.
Most recent rom may based on SPL 1.56 and therefore 1.54 is not totally compatible.
Will test it for more days.

mcdull said:
Now I am suspecting the version of SPL makes the difference.
my stock SPL is 1.54 and I uses USPL 2.5 to flash new rom.
Most recent rom may based on SPL 1.56 and therefore 1.54 is not totally compatible.
Will test it for more days.
Click to expand...
Click to collapse
1.54 is compatible. If you use USPL and put stock rom (RUU_Signed_Blackstone_stockSPL154.zip) onto device and get SPL 1.54.0000 anf then re-use USPL before flashing any rom based on 1.56+ you are fine.

mcdull said:
With different custom roms, I experience very lag system and with very fast power lost. The device getting hot and less responsive. Even after reset (complete power down and restart), the system is slow. And it will use up 50% of power in an hour (without 3G / wifi / bluetooth).
Any idea on how to debug?
Thanks.
Click to expand...
Click to collapse
Which Radio ROM are you using?

Still testing if SPL is the factor.
My current Radio ROM is 1.14.25.24
I guess this is a very common one.
But after flashing 1.56 HSPL, the machine is now more responsive.
The battery did not drain now. Let's see in the coming days.

mcdull said:
Still testing if SPL is the factor.
My current Radio ROM is 1.14.25.24
I guess this is a very common one.
But after flashing 1.56 HSPL, the machine is now more responsive.
The battery did not drain now. Let's see in the coming days.
Click to expand...
Click to collapse
Note - I'm sure your already aware of this but after flashing HSPL 1.56 you must use a 1.56+ based rom or your colours will be distorted and phone would appear in flight mode.

mcdull said:
Still testing if SPL is the factor.
My current Radio ROM is 1.14.25.24
I guess this is a very common one.
But after flashing 1.56 HSPL, the machine is now more responsive.
The battery did not drain now. Let's see in the coming days.
Click to expand...
Click to collapse
I suggest you to try latest stock rom avalible for your region.

Fallen Spartan said:
Note - I'm sure your already aware of this but after flashing HSPL 1.56 you must use a 1.56+ based rom or your colours will be distorted and phone would appear in flight mode.
Click to expand...
Click to collapse
It happens between 1.04 and 1.54.
But not sure if 1.54 and 1.56 is fully compatible.

I'd try the stock rom but I really can't use it for long. (bad functions)
The Radio ROM came from the stock ROM. HKCSL.

Related

Flashing Radios

i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.

ROM TIPS!

Hey, I just bought my HTC HD Norwegian model! I wonder what ROM you recommend! I would love to have TF3D 2 keyboard/dialers/calander etc etc, which on Diamond II! but my phone is Norwegian, can i have a unoffical Rom on my phone? what can i do?
My current rom is; RUU_BlackStone_HTC_NOR_1.56.409.0_Radio_52.62.25.3 4_1.13.25.24_Ship
I tryed duttys new ROM HD v2.7 XTREME, its not updating my phone, standing on 0% done in a looong time, so i had to go back in recover modus :S
Whaaaaat 2 do
losty-1H said:
Hey, I just bought my HTC HD Norwegian model! I wonder what ROM you recommend! I would love to have TF3D 2 keyboard/dialers/calander etc etc, which on Diamond II! but my phone is Norwegian, can i have a unoffical Rom on my phone? what can i do?
My current rom is; RUU_BlackStone_HTC_NOR_1.56.409.0_Radio_52.62.25.3 4_1.13.25.24_Ship
I tryed duttys new ROM HD v2.7 XTREME, its not updating my phone, standing on 0% done in a looong time, so i had to go back in recover modus :S
Whaaaaat 2 do
Click to expand...
Click to collapse
You have to READ and understand first before jumping into Flashing ROMs. Out of all the ROMs out there... Flashing Dutty's 2.7 is the most confusing, especially if you are new to ROM Flashing.
First of all, you would have to flash HSPL (Hard SPL) or USPL (Universal SPL) on your device to flash Cooked or Custom ROMs. Do a bit of reading on these 2 topics on the forum.
Learn about Bootloader mode.
Then go through the ROMs that are posted on the forum. Go through their change log, features, tweaks and programs that come with the ROM. Usually most of the Chefs post Change Logs and Screen shots of their ROMs. Go through the last few pages of the thread to know about any issues and solutions.
Then decide on the ROM you are interested in and go ahead with flashing your deivce.
Now, regarding the current state of your deivce... I am not really sure what exactly you did.
Try Removing the battery and put it back.
While holding down the Volume Down button, press the Power button. Your phone will enter the Bootloader mode (Tri color screen, rather 4 clolored sceen with White at the end).
Download one of the Stock ROMs they are also called Ship ROMs. Please do not download ROMs with version number 1.56.XXX. They are the latest ROMs and since I am not sure what state your device is in, I would recommend you to download a 1.14.XX version Stock ROM.
Then connect your device while in Bootloader mode and run the Stock ROM. You would get your device back to the original state that you bought it.
Thanks
Well i flashed my phone to Duttys new rom, but i screen is f*** up my colors is so mesed up, i updated hardSP aswell
losty-1H said:
Well i flashed my phone to Duttys new rom, but i screen is f*** up my colors is so mesed up, i updated hardSP aswell
Click to expand...
Click to collapse
Read the instructions properly. Here's the simplified version:
1. Flash a stock rom (e.g. 1.14.xxx) with 1.14 SPL. They also include the stock radio.
2. Flash stock SPL 1.14
3. Flash a 1.56.xxx stock rom (with 1.54 SPL). It also includes a new stock radio.
4. Run USPL 2.5(!).
5. Run the included RUUWrapper and install dutty's rom
kieboy
3. Flash a 1.56.xxx stock rom (with 1.54 SPL). It also includes a new stock radio.
do you have a link for that?
sorry
I found it myself, but thanks for the help

[HELP] Strange screen issue

Good morning,
im opening a new thread because i didnt find an answer for my problem.
I got my Blackstone running with HSPL1.56+ olinex, 1.17 radio and using different roms like dutty or miri ones... so everthing works fine since I tried to flash the new dutty rom holy grail R2... after that my screen s displsaying the colours wrong like in 256colours graphic. some colours like green and purple are flickering...
I tried to change from HSPL to USPL but it wont help...moreover i flashed the USPL and flashed with 1.56 stock rom without success
dont know what to try
thanks in advance
zwon
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
afr33s said:
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
Click to expand...
Click to collapse
i think so too
hm on my pc its looking good...
gagi75 said:
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
Click to expand...
Click to collapse
i think not because i flash roms which i got working before
take out battery i tried a few times...last night my hd had no batt^^
i wos instal ok rom but each time when i do reset he goes off he wont start then i remove batery off then put back and start he goes up then when i see on screen smart mobilty is write tu soft reset and is ok all.i have thet problem and solwed...do what i do meybe help
sory for english
Update your hardspl to version 1.56
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Fallen Spartan said:
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Click to expand...
Click to collapse
yes i tried... flashed the hspl 1.56+ before and using it with the equal spl version but wont fix my screen
i tried a many different solution but nothing would solve it
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
sure? than sorry.. dont saw it
ill give it a try
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
how to revert to stock spl?
ok find it by myself....would 1.54 be recommend or later? or could you even post the url where i find this in wiki??
dont find it
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
meska said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
Click to expand...
Click to collapse
so i tried this with all 3 kinds of stock spls...1.54 even too but it wont work
seems to me as it would be an other problem as the Greenscreen issue
yeah would be nice if you could help me with that tomorrow
ill add u in icq

USPL or SplExploit???

Is anyone working on this anymore? Just curious.
Yeah my old HTC Vox had an USPL, this was much better then the HSPL. The USPL was automaticly overwritten if I restored an official HTC ROM. If i installed the USPL I could flash any custom ROM i wanted till i reflashed a official HTC ROM.
If your phone has problems it's much easier to restore to factory settings
Grtz,
FeareX
The other thing is a lot of the problems on the kaiser were solved by flashing the spl that matched the rom you were using. Does this still hold true?
sd73ta said:
The other thing is a lot of the problems on the kaiser were solved by flashing the spl that matched the rom you were using. Does this still hold true?
Click to expand...
Click to collapse
That would hold true for any phone, but on Rhodium it doesn't really matter because there are currently so few SPLs. If I remember correctly, they're only 2, and only the HardSPL based off of the latest one is available for download.

Alright i give up!

Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom

Categories

Resources