bought my IIi for almost 1.5years and suddenly now suffers several problems;
- O2 Connect application gone after hard reset.
- AutoConfigure also gone.
- Touch screen alignment totally gone mad so i have to use buttons only.
just hope anyone here can kindly give me at least links for me to overcome the problems. till now i did not do any ROM upgrading yet. i searched this forum and found some info but it didn't help much.
thanks!
sheikhcattivo said:
bought my IIi for almost 1.5years and suddenly now suffers several problems;
- O2 Connect application gone after hard reset.
- AutoConfigure also gone.
Click to expand...
Click to collapse
As you've already done a hard reset and so dont have any grat data to 'lose' by doing another), my suggestion would be to do another, by removing the main battery for at LEAST 1 hour to drain the backup battery also, so doing a 'true' factory reset. If your still happy with all the O2 stuff (I scrapped mine as soon as possible as it seemed to slow it down a fair bit) when you replace battery this should restore it from the auto-installer cabs you will have on your O2 extended ROM.
- Touch screen alignment totally gone mad so i have to use buttons only.
Click to expand...
Click to collapse
Whilst the device is off and draining the reserve battery, take a small piece of card and run it around all four edges of the touchscreen where it meets the casing. Sometimes a lot of crap can build up in there which inteferes with the touchscreen's ability to detect where the touch has been made, also take this opportunity to the screen with a screencleaner once this has been done (pretty much any will do, I use stock windowcleaner from the pound shop myself!)
Rom upgrading is easy once you have the required installer and some patience: a quick search for Alpine ROM upgrade should bring up plenty of posts, some by the authors of some of the modified rom packages themselves, explaining in detail the steps to take to upgrade the unit. It takes a little patience and in about half an hour you will have a PDA without all the extra stuff you don't need, that has (probably) an upgraded radio & camera (better signal strength, and pictures)
Hope this is of some help
Joe Pinball
Hi guys,
I have a problem with my o2 xda stellar where I can be typing a message on the hardware keyboard but even though I'm hitting all of the keys correctly its still missing the odd letter - it seems as if its simply not picking it up. I've disabled the word suggestion feature and this has helped a little but the problem still remains. Its driving me bonkers!
Any help would be much appreciated.
Yes, it's one of the things that made me regret buying this f****** phone in the first place.
Read this, might help you to a certain extent.
http://forum.xda-developers.com/showthread.php?t=347457&highlight=double+letter
As soon as I installed the HTC keypad + keyboard cab it started happening so I removed it.
JDSX said:
As soon as I installed the HTC keypad + keyboard cab it started happening so I removed it.
Click to expand...
Click to collapse
I've never installed that although it does look like and interesting concept.
I found disabling word suggest worked to improve the recognition rate. Still have to be careful with the first word I type, but otherwise it is ok. Might give it a try with autocorrect off (but I like it auto-adding the ' in nt).
The same thing happened on my Hermes and my Wizard (both of which I turned suggest off on), so I wasn't surprised that the Kaiser did it (although it was almost tolerable with autocorrect on, which the Wizard really really wasn't).
I've tried the suggestions in this thread and the other linked thread but with no success. My hermes used to do this, but when I upgraded to the WM6 beta it seemed to fix the problem on that device. I've not tried the 6.1 roms - can anyone comment on whether the problem is still evident on those? (I'm guessing it will be).
Seraphic said:
I've tried the suggestions in this thread and the other linked thread but with no success. My hermes used to do this, but when I upgraded to the WM6 beta it seemed to fix the problem on that device. I've not tried the 6.1 roms - can anyone comment on whether the problem is still evident on those? (I'm guessing it will be).
Click to expand...
Click to collapse
I think its still there, the problem that I was having was if I were to type "this is a test" I exprienced delays with my spacebar...it would spell out
"thisi sa t est". and it would do it EVERY single time. I later found out that it was directly tied into HTC Keyboard and Keypad b/c once I removed this, it wouldnt do it anymore. (Looks like TouchPal for me). However, on Dutty's Beta 1 I didn't experience this problem, but other WM6.1 roms I did. Of course with Dutty's I had to jump through hoops to get the keyboard and Touch Keypad to work cooperatively and maybe this "fixed" it...who knows. BTW I have the Tilt version of the Kaiser.
I just got my Diamond back from repairs and wanted to compare experiences:
1)
I first bought a Diamond two months ago. It came with 1.37 ROM series on it, the screen wasn't too yellowish, but touch function wasn't responsive and the GPS was a MESS!
(of course, I tried many ROMs official and unofficial, almost every Radio ROM and various Hard-SPL. None of that fixed the problems.)
I could cope with with the other flaws, but I just couldn't bear my GPS wasn't getting a fix, no matter how much sattelits were in view...
It worked at first, but soon started to display '66666' instead of the location and finally, it would never display any location again.
I tried every tips and tricks and softs, it helped giving me more and more satellits in view and apparently active, but at the end my crappy GPS could never turn the datas received into a proper location...
2)
I sent my device back to warranty (after flashing back to official ROM and SPL) and had to wait for about a month.
(the technician at first tought I was just a noob unable to set his phone properly, but after two days of attempts, he had to admit that there was something wrong with my phone and sent it to the the headquarter for replacement of motherboard and so on.
3)
The new phone I got came directly with 1.93 ROM and a little bit more yellowish screen, though, there is no spot or stain on it. So the coulour doesnt bother me.
But from the beginning I noticed the new phone was much more responsive even at the slightest touch.
From the first try, the GPS got a fix in about 1 mn time, with only 3-4 satelits in view.
I installed Hard-SPL and the latest Australian Official ROM, and though the screen seems now a little less responsive than before, the GPS is still working, fine.
I'm a VERY happy user of Diamond now, but I'm still wondering one thing:
it looks like once the warranty technicians understood that I was very demanding about quality and complete functions, they took time but gave me a phone totally different in terms of behaviour and quality of the components sensitivity of screen, GPS etc.
Is there some bad production series that they never tells publicly about, and much more better series that they give you as a replacement once they understand you will bother them until the end of time if you are not satsified?
Plz tell your experience about having received two new diamonds with totally different behaviour and quality of the components.
I guess you are totally right!!!
My first device was pealing paint in the aluminium frame on the second day, work very good by the way.
Now i´m on the second device and i my hardware keys, especially the call button is sometimes irresponsive and i have to push it several times to enter the dial.
Tried cooked rooms as well, and the call button issue still remains, so i´m a little unhappy with my diamond experience.
I've noticed that whenever i turn on my display after having left the diamond unused for sometime the lcd doesn't switch on smoothly, what i mean is that it first displays a grey pattern(only for a ms or so) and then the desktop( lcd off>>grey flash>>desktop). Usually the transition from off to desktop is quite smooth, but in my case its not!
Is this a s/w issue or h/w ?
I've never experienced that particular problem myself, but sounds like H/W problem to me...
just been through a couple of other threads related to the grey screen of death...i've had it once...it happened while i ended a call, had to soft reset to resolve it.
take a look at the grey screen of death i'm talking about
Pretty scary indeed!
It might not be a coincidence that you experienced both: grey transition when switching on the screen and once, the grey screen of death after a call...
Two different effects of the same defective part in your H/W?
a solution!, almost
untill now i've had auto brightness control switched off and the brightness was set to minimum to save battery life, but now i just tried switching on auto adjust backlight and the problem seems to have vanished.....coming out of standby is smooth as ever!
although i've to say that i don't quite understand the logic behind it.
*EDIT*
it doesn't help for long
blufade said:
a solution!, almost
*EDIT*
it doesn't help for long
Click to expand...
Click to collapse
This is what I was worrying about...
Your method sounded like a work around to avoid the display failure. But as a matter of fact, there must be a reason for the display to fail. (bad screen, power supply or something...)
By the way, I'm more and more convinced about my assumption that there are bad production series and better ones:
Today I had my device connected to my PC through USB for a couple of hours. In the meantime, I was downloading and deleting messages, watching google video on opera, after that I used wifi etc.
In this situation, my first Diamond would have got hot like hell and my hand could barely stand the pain...
Since many people were complaining about over-heat problems, I thought that was a common problem with Diamond.
But the new one did not get that hot. Just a little over-warmed, but definitely not too hot. From that phenomenon, I can see what I felt about a better touch-flow behaviour, a better GPS and so on is a part of a whole:
I was first sold a ****ty phone, and now I finally got a proper Diamond!
People with bad series, you don't have to cope with all those troubles, ask for a replacement phone!
my diamond gets heated up quite a bit at times....but i dont fully uderstand what exactly is the cause.....i've had experiences with the diamond getting pretty hot while using wifi & or gps and on another occasion i was watching a DVDRIP via wifi(@ full power) using core player and also with gps cycle running in the backgroud, still the diamond stayed well within reasonable limits.
i think it has to be a software problem, possibly the radio s/w
would you mind sharing the radio version of your diamond?
As written in my signature, I'm using the 1.00.25 which is included in all latest official ROMs.
By the way, I hope you did not cast a spell on me! (just kidding)
Today I experienced my first grey screen!!!
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Just for one second, looking like an old black and white TV screen trying to tune on channels.
Hope that was the first and last time. In ordinary calls, (without being synchronized to the PC at the same time, it never happened so far...
sorry to hear that my friend
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Click to expand...
Click to collapse
I'd the same experience except for the fact that my diamond wasn't connected to a PC.
I hard reseted my diamond yesterday, but the grey splash while i turn on the display from standby(post 3) still exists ( ......i don't suppose its a software problem anymore.
blufade said:
i don't suppose its a software problem anymore.
Click to expand...
Click to collapse
Why not trying to send it back to the seller and get a new one?
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
Click to expand...
Click to collapse
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
blufade said:
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
Click to expand...
Click to collapse
You can stay there and wait for 5 more minutes in the shop while they are attending other customers, just to proove your point.
If they are honest, they will not deny the fact!
foxium said:
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
Click to expand...
Click to collapse
knave said:
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
Click to expand...
Click to collapse
There might be some tweaks in the cooked ROMs that avoid the problem, or it might be due to some bad flashing or defective hardware.
If not, how do you explain that I've never experienced this with my previous HTC phones (wizard, Trinity...) nor I experienced it with my Diamonds (the first one and the new one) with stock or cooked ROMs.
except for that very special time, when I received a call while downloading messages through Active Sync.
Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
exdout said:
Hey everyone,
My problems consists of:
- The screen/touch is off. I've done Screen Alignment, it works for a couple hours or so then it just starts to have a mind of its own again
- When I slide the keyboard out, the screen does not rotate, it's just frozen in portrait mode. However, responds to the keys I push on the keyboard, I've tested it by texting someone.
The ROM I was using was a Generic NAM R3A WM6.1 when this problem occured, tried to re-flash with the same ROM, no luck and finally a custom one (Touch X 10.8) and unfortunately, still no luck.
I've never dropped the phone or done any modifications to it. Am I doomed and will have to send the phone in for repairs or is there another way to fix all this?
Thanks
Click to expand...
Click to collapse
If I were you, I'd have it back in the shop in no time. But you will need to put back the original rom, otherwise your guarantee will be gone.
Good luck!
Don't forget to revert the SPL since you flashed it to hard SPL.
If You make a new topic then it's pointless to use not at all informative cries for help. It does not say anything about the problem you are having.
The title should say something about the issue so people who know something about notice it and can offer to help and people having the same issue later can find this topic.
Sorry, I'm new to this message board and not really around either.
I've been searching for internet for weeks and i still coudn't find the solution for this thing ..... my screen scrambles and jumbles everytime i connect to the internet using 3g....3dge.. etc but not wifi
here is my phone's background:
when i purchased it it has no problems at all...
after 1 and half years due to daily use keypad gets hard to press and the screen has a lot of scratches casing too..
so i decided to change the case of the xperia an the tft resistive touchscreen and clean the whole thing..
after putting it all back together it runs fine... checking the landscape camera wifi etc..
i decided to change rom because i think i could make it so new that even the os is changed...
i follow the basic process and it work fine..
after a week i notice that when i connect to the internet 3g... it jumbles the pixels of the screen in the upper part of the x1 even on landscape mode.. it is still there....
i searched the internet and i found old questions never been answered;;
http://www.xperiax1.net/x1-problems-issues/1735-youtube-videos-scrambled.html
http://forum.xda-developers.com/showthread.php?t=735531
somehow related to connecting 3gs..
i never change to 6.1 because of it's lack of features..
ive change 6.5 roms but the problem is still there....
here is a sample picture:
http://www.glowfoto.com/static_image/27-005937L/9102/jpg/11/2010/img6/glowfoto
can somebody... please.... im begging you.... explain these problem with me and how can i solve it....???? PLEASE..... I APPRECIATE YOUR REPLY OR RESPONSE PLEASE!!!! thank you and God Bless!!!
PLEASE THANK YOU.... I REALLY LOVE MY OLD PHONE... I DON'T WANT TO BUY ONE...
dude, seriously. no one answered? it's very common tiling issues. yours just happend due the notification icons animation. most probable cause is vga driver. search for alternative driver.
No idea dude. But you may try to reflash your X1 to other ROM. I had been facing almost similar connection problem, but mine, the WiFi is undetectable. So I try to reflash my ROM with other ROM. Fortunately, it's working back.
this might be some app problem rather than rom/driver issue although some rom/driver handle it better. i just experience the exact issue after installing weather4me app. disabling refresh(update weather) during startup solved mine. maybe there's background app/process that doing something similiar causing it.
I see 3 possible reasons for this behavior:
- the displaydriver of the 6.5-rom is not really compatible to the hardware.
To check this you can flash the original rom and test if everything works.
- the radio interferes the communication between display and board.
This can happen when the device is not reassembled as original
(broken/removed shielding, dust/dirt in connectors while reconnecting,...).
To check this you have to reassemble the phone again.
- damaged hardware thru electrostatic discharge when touching the electronics.
Unfortunately this can not be checked or repaired. You can only guess if this is a possible reason by answering this questions to you:
- did you wear part-synthetic clothes while working on the electronics ?
(this forces electrostatic charge)
- did you discharge "yourself" every some minutes by touching a grounded point ?
- did you lay the electronics on a plastic ground ?