Database Develop

sx66 bluetooth expired. missing rom... here is a sollution!

SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.

Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck

i have the same problem.. since octobre without solution

Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck

hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!

Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun

DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!

Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.

This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.

I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.

please mamaich if you can find it this will be very helpful

Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.

Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:

new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.

what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you

problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.

hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?

PDA2K dead.

I have a I-mate PDA2K with ROM 1.12 ITA and while I was to install the 1.40 ITA ROM downloaded from www.clubimate.com, the screen of my pocket pc became black, active sync has closed and the program to update the ROM is remained blocked in checking the hardware.
Now the pocket pc present only the notice "Serial v. 2.06" and do not respond if I press the on/off button.
How can I reinstall the system with the old ROM or the new ROM???
Active Sync does not see the pda2k.
Please, help me!!!!!
Thanks and sorry for my english.
Best regards,
Enrico.

did the flash fail halfway through? if it never started you should be able to just reset it and be back to normal.. try to put it into bootloader manually "power+record+reset" and you'll get the serial 2.07 screen, then dock it in your crable and it should say USB 2.07 and your PC recognize it.. run the flash again

No, I have pressed "power + record + reset" and inserted the pda2k in the craddle, but the notice is "serial v2.06" and not appear "usb v2.06" adn the program to flash the rom notice "Error 101: connection error" because not see the device.

Have you ever changed the Sync Cable? There would be some probs with your cable!!!

I tried to remove and then replace the battery and I inserted the pda2k in the cradle. Now the notice is "USB v2.06", I tried to reinstall the ROM tonight but the program is remained blocked with the notice "checking the information on your device" for all the night and the Active Sync crashed. Today I detached the device and the "error 101: connection error" appear.
How can I install the ROM directly?

I'm having the same problem
The cradle is ok for sure
but no connection to activesync
help is needed
Best regards
Paulo

WOW ... WOW ... WOW ... WOW
I resolved my problem!!!!!
I noted that the file downloaded from the original website clubimate is composed from varied file inside.
One of these is for checking hardware device and one of these is for upgrade the device.
But the file downloaded is an executable file complete and when I executed this, the program was blocked during the checking.
Now I think that if I unpack the exe file with winzip in a directory and I execute the only file to upgrade the ROM, I avoid to do the check of the pda2k and maybe it function.
This is the solution.
The upgrade started and now I have my pda2k like first one.
I hope it is of help for other.
Bye and thanks at all.
Enrico

Problem with Qtek 9090 Camera

Hello people, I have a question for you. I recently did the Upgrade of my Qtek 9090 to WM 5 (device data now is PH20B WWE 5.03.02 1.12.00). It seems to be working fine (have yet to test wireless connection), but I discovered that I can't get the camera on the phone to work. For some reason, it simply does not react to camera button. It also does not react even when I try with the manual startup of pictures & videos application. Does anyone has any idea how to get out from this one? If this is any help, the original phone data were PH20B 0 B WWE E DANGA102 1.40.00 0 0 1.40.147 1.12.00 12.00.
Thanks a lot

Simple but crucial question: Which WM5 rom you flashed? Have you read specific information about this rom? maybe this one requires some post-instalation operations?

Basically, I found this ROM on www.buzzdev.net, and it only stated BA WM2005 5.03.02WWE - standard upgrade. It is basically the only one which worked for me, since every other dumped me (the model of the phone matched the ROM). However, there were no additional explanations for this, so I am stuck. Is there any registry tweak, or aditional piece of software which could make it work, or I will have to go looking further for better ROM?

As long as we don't know what is the problem with the ROM, we cannot help you - some ROMs just had camera support cut out, others needed installing additional software, some had errors.
About model/device check: please take any recent WM5 rom (baniaczek's for starters) and just read carefully flash instructions from Wiki - there is no problem with device check, if you understand what you do and how you should do it.

Thanks Jakub for good advice, I've been doing some reading and I tried baniaczek's latest issue from the web. However, I've got stuck. Namely, MaUpgradeUt_noID.exe does not work in my case. It simply tells that there has been communication error with the device, or if it starts it tells that this ROM upgrade utility was not designed for this device. I tried the other way with BaUpgrade.exe, with usage of EditFix.bat and xda3nbftool.exe, but it seems that I'm doing something wrong - each time I get the message that the specific ROM was not written for me and that I should check my vendor. Is there any way to get out of this, since now it seems that I can't do no upgrade or downgrade at all?
Thanks a lot in advance, I know this is mostly due to my mistakes and usage of unchecked ROMs.

Thank to everyone who was trying to help me. I did some experimenting in order to solve the upgrade issue, and I solved the problem. This is how I did it: Namely, I downloaded KitchenAKU3.5v2-xplode, which also contains useful readme. Basically if you want to have MaUpgradeUt_noID.exe to work for you at all, you have to put the device in Bootloader mode (press power + record simultaneously). After that, the upgrade went smoothly, after I designed my own rom, which was very easy with xplode's tutorial.
One more thing I did was that after the upgrade, I did a soft reset and "cleanup" of the device. after the soft reset I changed following options on the boot screen using camera and record buttons:
“Enable KITL” set to NO
“Clean Registry Hive” set to YES
“Format Storage” set to YES. (again on xplode's instructions)
After that, I confirmed settings with pressing of the mail button. One minute later, I had fully operational and very fast QTEK 9090 running WM5.
I hope that some things I did will be useful to other people trying to fix their blue angels. And of course, thanks to Xplode for making an excellent user-friendly upgrade.

no Gsm service IN wm5

i have weired problem,after upgrading to wm5 on my blueangel everything was ok,but i cant remember if i changed something or it happened by it self,the GSm service shows NO SERVICE,,,and the synchronization with the PC IS NOT WORKING ALSO,,,and whenever i try to hard reset it with the record and camera buttons ,when i press on the mail button nothing happens,,,as if i didnt press any thing......i tried to go back to 2003se,it worked fine,i used both radio versions 1.15 and 1.13 and the same on the wm5
i tried to reinstall the wm5 it reinstalled with the same problem and i noticed that my configurations r also the same!! and even the wall paper ,it seems that the settings sticks to the memory in some way ,,how can i delete it?how can i get rid of that?and install a new fresh copy of WM5 on it?
my device info now is 5.04.09
radio:1.13
and the surprise is no extRom version is Blank!
plz i need help with that....

what device do you have?

it's IMATE PDA2K

Have you tried to make soft reset? Is radio version showing up on reset?

The same situation. Everything was fine untill i upgraded to WM5 and then WM6. It seems that all files in ROM were saved cause on device start up all old applications are starting, such us XPshut and etc, but system gives can't find the file. the same applies to phoneservice.exe. the only thing which helps is to roll back to original 1.40 from imate.com. any solution?

if all apps from wm5 are there during startup, you didn't perform the reset + no/yes/yes + mail button routine, did you? the same thing when upgrading to wm5 from 2003se.

[Q] I'm pleading. Help me load my kaiser please.

Please, I tried loading Android on my At&t Tilt, and it wasn't successful, so I decided to switch back to Win 6.5, but could not load beyond
"Smart Mobility"
R 1.70.01iNex
G 25.65.30.04H
D 1.56.00.00
Please, I'll appreciate your help and concern. I've spent more than 10 hours trying to fix it using most of the thread posts.
I will love helpers to be specific on how to change back to win 6.5, and the complete tools for making android work on it.
I will also love someone who can help me through chat page on facebook or yahoo. My id is tundelogic for both. Thanks in anticipation and God bless you.

If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5

Infosoft.lt said:
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Click to expand...
Click to collapse
I tried installing android, but it didn't install, after much trial, I felt switching back to WM ROM will work for me.
Please, don't be annoyed can u please post links of all I'll need to get my phone back to WM 6.1. i.e
Hard SPL to be used, Radio to use and Rom to use. I appreciate your response. Thank you.

> HardSPL 3.56 (force USB) / or you can use 3.34
http://forum.xda-developers.com/showthread.php?t=498320&highlight=Hard+SPL+3.56
> Radio 1.71... (actually I've never had any problems with other versions, but 1.71 is the newest).
http://forum.xda-developers.com/showthread.php?t=393182&highlight=Radio (post #3)
> Official WM 6.1
http://forum.xda-developers.com/showthread.php?t=439408&highlight=Kaiser+WWE+6.1
Because there were some problems for you while trying to flash Android, I recommend firstly to enter bootloader (hold Camera + Power buttons together and reset with stylus (button for reset is near miniUSB port; just put stylus in it and push for a few seconds); you'll see tri-color screen with SPL version...), then connect it to computer and finally run WM 6.1 EXE file (in case you're using Windows 7, set file compatibility mode to XP <- I'm not sure if it's necessary).

Thanks I'll get back as soon as I'm successful. Please, if you won't mind, can you please give me your chat id, so that if I have any issue, I can reach you quickly. Thanks once again. Y! [email protected].

If you'll need my help: http://www.facebook.com/Vytautas.Baciulis

Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.

tundelogic said:
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
Click to expand...
Click to collapse
You can get the files needed to run the android and guide at http://forum.xda-developers.com/showthread.php?t=680518