Related
ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up
Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.
post the present IPL/SPL it displays now.Which rom you are trying to flash now ?
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.
If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)
lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!
May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC
kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!
try this: http://forum.xda-developers.com/showthread.php?t=276963
Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.
Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?
Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?
Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.
Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.
Hey there,
since I'm new to the community I hope I'm not doing it wrong
I will receive my new Herald within the next days and now I'm seeking for all the stuff I will need then.
1. Hard-Spl. I don't get it. What is it? Is it some kind of firmware update or whatever? The ROM's thread says that I would need SPL 4 or later to successfully finish the Update but I can't find that SPL application in version 4+ :/
2. http://forum.xda-developers.com/showthread.php?t=437385 - http://www.evolvers.net/Herald_Roms/Version 7.7/ => I'd like to use that ROM. But I'm not too sure whether to use Manilla2D or Omnia.
3. What if I needed to send my device back for warranty reasons. Is there some way to flash back the standard Win Mobile 5.0?
I hope I will get your attention!
Regards,
Chris
Hey there,
A friend of mine just told me about flashing ROMs literally a few days ago. I did my first successful flash just yesterday and I am very happy that I did. FYI, yes I am using a stock TMobile Wing from 2007.
Rom's are not interchangeable across different phone models as far as I know. So you need to get ROMs made for the wing a.k.a. the Herald. Any Rom for the Herald should work.
Just remember one thing that I forgot to do, make sure that you back up your data. I forgot to do this and lost all of my data. Luckily, I did not have any pictures or music that I was too sad to lose. However, I did lose my contacts. Again luckily, I had an old Sim card from last year that had my contacts on it, so I was able to get back 90% of my phonebook, except for a few people that changed numbers or new contacts. So be sure to save anything you want to keep somewhere else.
I am pretty technically savvy, but I must say that flashing the Rom did take me several hours. The process itself only takes about 10 minutes, but it took hours to figure out what type of Rom I needed and how to exactly flash it. You will see many people trying to tell you that you need to know your IPL and SPL version, and there is no way to know this until you start flashing! It wasn't until I did my first accidental flash that it showed me this information, and this ended up being my first successful flash. After trying for several hours the night before and not succeeding, I guess that's why it slipped my mind that flashing successfully would erase all my data.
The one that actually worked for me was the Canonyang Rom. In the link below please look at post number 216, and you will see a link to download the ROM that worked for me. The file is "HardSpl_WM6".
http://forum.xda-developers.com/showthread.php?t=332413&page=22
I tried to flash directly to open touch, and no matter what I tried it was not successful. When I accidentally tried this Canonyang flash it worked successfully the first time, and after that now I was able to flash to any other Rom.
I am currently running open touch light version 6.5 because I read in another thread that it's supposed to be the fastest. I don't need a lot of features so I'm happy with what it has, and it is much, much faster than the stock T-Mobile Rom.
Since you are now getting it, yes, warranty is an issue for you. I am very new to all this, but from what I gather, once you flash, it does void the warranty. Perhaps someone else can answer if there is a stock TMobile rom, that you can flash back to. However, since the roms are digitally signed, I'm not sure that by even doing that, if TMobile can tell you modded it, and therefore elect not to honor your warranty. I guess that's a risk you have to decide if it's worth it or not. IMHO, I found out about rom flashing this week, and my warranty was up last month. However, if I had found out about this during my warranty period, I would have still done it. The Tmobile stock rom is sooo slow, compared to these roms. If you've never used these roms, you'd think like hey, it's got some bugs, but it's not that bad. But if you've used them, you're never going back to stock rom again.
I apologize if there are any typos, as I am using voice to text recognition software that I am testing. I thought I'd help you out by writing this as well as I test it. Good luck and let us know if you have any questions, we're all here to help.
Hey,
thanks for all the information. Was very helpful. I decided to you the ROM from that link. Should work, shouldn't it?
The only thing I don't get is how to get to SPL4+ :/ I heared of different methods of SPLing. Like Hard SPL and USPL. Can you bring light into that cave?
Cheers.
Hey there,
Your link goes to the Open Touch thread. The link I'm referring to, is this one:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
As I said, I was NOT able to flash directly from stock to OTP. I tried many methods, and Canonyang was the only one that worked for me. After I successfully flashed to CY, then I was able to flash to OTP without issue. But in theory yes, any Herald rom's should work fine.
In regards to IPL/SPL, my wing is from September 2007, and I had IPL/SPL both above 4. I had NO WAY to verify this before flashing. When I initiated the flash for CY, and the wing rebooted, it was THEN I saw my IPL/SPL versions. I'm sure yours will be at least v4.
Actually as I write this to you, I remember a critical step I forgot to tell you. You need to Application Unlock your device as well. This is probably what I was missing in my failed attempts. After I did that, then the CY flash worked. I got that information, from this link:
http://forum.xda-developers.com/showthread.php?t=356295
So I would suggest following the steps there first, then trying the link earlier to flash to CY, then flash to anything else. This is the procedure that worked for me. Good luck!
Hey there and thanks again for that bunch of information
itbmd said:
I'm sure yours will be at least v4.
Click to expand...
Click to collapse
What does that mean then? I do not have to HardSPL my phone? But still, would you mind telling my step by step (And I really mean step by step^^) how to HardSPL a device? I really do not want to brick my phone directly at the beginning.
Oh and what should I rather be using, SoftSPL or HardSPL?
Cheers.
Hey there,
Sorry but I just flashed my device less than a week ago as I mentioned. I don't have many of the answers you ask, because I'm asking them myself. I don't know the diff between Hard vs. Soft SPL.
The file I linked you to earlier, is a hardspl, as denoted by its filename "HardSpl_WM6". It hardspl flashes to the canonyang rom. It was then I saw the IPL/SPL versions, and then was able to flash to other roms.
FYI, I was concerned about bricking my device as well. But during the roughly 5 hours I was trying to flash it correctly, every time the flash failed, it did NOT brick. It just errored on the pc, and the Wing itself just restarted and went back to the stock TMobile rom. It never actually bricked. Make sure you do the application unlock though; I think that's a step that people may not do and could cause it to brick. Good luck.
Ive put a hard SPL on, unlocked it, and put dutty's rom on.
After many months of it working fine, the backlight has decided to never turn off and the hardware buttons no longer work.
I need to send the phone back but im worried that they will reject it if they find out that ive messed with the rom.
How can i return it to standard so i can send it off - spl etc that is, because im ok with the rom, i can just use HTC's offical one.
Or, on the flip side, does anyone reckon they wont check? - im with orange UK.
Cheers for any help guys
hi m8 you will need the ruu.signed stocksigned hard spl- not 100% sure but i think you have to hard reset afterwards.
View attachment RUU_Signed.zip hope this helps
not sure if i`m allowed to add other peoples attachments so sorry and if mods want to delete it then please do
is this 1.24, 1.37, or 1.93
Please advise where to find 1.93 signed
There are all the original ROMs on Duttys site.
Look here #39 do this
http://forum.xda-developers.com/showthread.php?t=400950&page=4
the stocksigned i posted is 135 but your better off following omaga and the link he has posted cos you will need custom rru and you`ll find all the stuff you need in the link
I have my self used this guide when I put my Diamond back in orginal shape, so its works. Put/find your org 1.93 rom first flash it in your phone and then flash the 1.93spl signed. Worked for me!
kk - cheers for the help guys
Got my new one now, so the fun starts again!
I got xperia for about 7 months now. Back in feb. 2009 i installed the update service suite from SE and upgraded my rom following the onscreen indications...everything worked fine and i was happy 'till now when i want to update the rom again.
So...i download the new version of update service from SE website...install it, do exacly as they say but i can't get my phone detected when the colour lines appear...it goes from serial to usb a few times then i get the message on the PC...it can't detect my device. I pugged out everything from my laptop, changed the **** usb port, rebooted, killedmyself a few times but nothing works. I use Windows XP sp3 and it's the same laptop i used back in february when everything worked fine.
PS: this is my last SE phone...it's inacceptable that a phone like this (highend and pricy) would crack on the volume buttons side. At least for me Xperia was simply not a good way to go.
Try turning off and on the "allow usb connections" box in Device Center/ Active Sync settings. That was the only thing that worked for me.
I tried that too...does not work. I can see the bar indicator for 2-3 seconds at 0% then the device resets and tries again. Also from time to time i see a screen with "no image loaded" or something. If i reboot it the device works ok with the rom it has installed now.
Which rom do you use?
Have you try to make a hard reset just before trying to use update service?
No...i didn't try a hard reset...will try.
These are my official rom details :
ROM version: 1.03.931.10
ROM date: 02/02/2009
Radio version: 1.10.25.18
I can't belive it's so hard updating something the way the manufacturer intended to and pointed the user too
Ok...hard-reset does not do anything good ether. On the coloured screen i get this information :
KOVS110
SPL-0.72.0liNex
MicroP1-787
MicroP2-707
Please help before i crush it and throw it away
The issue is your SPL: you have Olinex SPL but update service doesn't work with it!!!
Flash back to stock SPL
Flash back what...the rom that is now installed as u see in the first posts is like 02.02.2009 ... how do i flash it back ? can u be more specific or point me exacly how to do it? i don't wanna mess it up. Cheers.
The information you gave show SPL 0.72 Olinex
I think you try several custom rom before flashing back to stock rom
Olinex SPL is needed for custom rom but update service doesn't work if you have it on your phone
Go here to flash back to stock SPL
After that, update service should work
on other hand, try to download one of the latest rom's found here on xda, rename it to kovsimg.nbh an perform an update trough the sd method. works too, you know. if you do so then SEUS will allow updating again, no need to revert back to stock spl, at least, that was in my case... long time ago.
I wrote an email to sony ericsson giving this info and i'm waiting to see their "official" answer to this issue. I wanna do this the official way...don't wanna mess up something.
If you guys still have ideas i could use feel free.... cheers.
sfara said:
I wrote an email to sony ericsson giving this info and i'm waiting to see their "official" answer to this issue. I wanna do this the official way...don't wanna mess up something.
If you guys still have ideas i could use feel free.... cheers.
Click to expand...
Click to collapse
I wonder how they'll take that..
"Soooo you hacked your phone and don't know how to get it back. You want the "official" method? Send us your phone and £50 and we'll do it"
P.S. This is just too funny!
Dan White...did u read the first posts? I didn't hack anything....i updated my rom back in feb with a new OFFICIAL rom and that was that (the phone still works with that one) and now i wanna do another OFFICIAL update...how did i hack it ?
sfara said:
Ok...hard-reset does not do anything good ether. On the coloured screen i get this information :
KOVS110
SPL-0.72.0liNex
MicroP1-787
MicroP2-707
Please help before i crush it and throw it away
Click to expand...
Click to collapse
you see that SPL - 0.72 is from 0linex? Stock SE rom doesn't come with 0linex.
Really, you must have did hard-spl to your device... no way you could not have done it.... unless.... you've bought a refurbished x1 and they have only restored the stock rom for you, that's why you could update once..
Really, think again, think hard... we are here trying to hep you and based on the info you gave us, we can only see that the device been hard-spl -ed.
like i said earlier, download an official Rom, rename the nbh file to kovsimg.nbh and copy it to your microsd, power off your device, hold both volume down and power button at the sametime untill a tri-color screen pop's up, followed by a grey screen and follow instructions. link to official roms:
http://forum.xda-developers.com/showthread.php?t=475482
link to revert back to stock spl:
http://forum.xda-developers.com/showthread.php?t=431218
latest section in first post. not difficult, just follow the order.
Really, your phone is not stock anymore, but that's better anyway...
cheers.
I understand what you mean. I will do as you indicated tonight but please belive me that i only did 1 update in february and i did it trought SE update service and it worked back then (that's all i did and that's why i'm amazed).
Thank you for the info and i will be back to post news.
Ok...managed to upgrade my rom to R3 but i can't hardspl to ruusigned_072stockspl.
As you can see in the first picture the hardspl detects the image from within the phone (1.05.931.10) and the one that i want to install (0.72.stockspl). I go forward, the phone goes into 3 color mode and then i get the error 284 as seen in the second picture.
I changed the usb port but no luck.
God i swear this is my last smartphone
Forgot to upload the pictures...here they are.
i'm having the same problem as you are. I updated my phone to the R2A version around April. Now when I try to update my phone it doesn't detect my phone. i checked the boot loader screen and it also doesn't show the stock SPL. I don't know how can Sony Ericsson Update Service do this to our phones.
Did you do the sd card boot for the R3A version? I'm going to try this tonite and see if it works.
Yes, there's a post in this thread that points you to the link with stock windows mobile roms. I upgraded to R3 just using sd card. But the hardspl is very stubborn...i could not get it work. By the way what is hardspl and what is the difference between the 2 roms? one si for windows software and hardspl is like the 'bios' so to speak?
Anyone had this problem...please help me to get the hardspl stock.
Hello out there.....
First of all i have to say THX to all these people which are really willing to help every1 with their great tutorials. Ive used alot of them already. Thanks.
And i have to say sorry for my english language, due Im german and i left school behind long time ago. I'm really taken pains to write this comment.
Now, in my case ive tried to restore my device (Xperia X1i) to OEM status step by step as its shown in this thread.
My worst issue is that my touchscreen aint work anymore after i flashed a custom ROM and that i got stock at the point where the ROM wants to configure the OS like "Tap the screen to continue with configuration".
Ive tried to flash way too much ROMs using HardSPL but the touchscreen wont let me do anything - no reaction.
So how can I restore the bootloader (SPL) on my device, when my touchscreen aint work? How can I take the following step without any working ROM ?
sirsycho said:
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
Click to expand...
Click to collapse
I do not know what I did wrong, that the screen wont react anymore, but im sure that the SPL is the cause for this disaster.
I'm really desperate couz i already have sent the device to the SE Support, where they told me that there is an "extraneous" on my device although ive flashed the Stock ROM firstly... there was still something that bothered them...
After i got the device back the touchscreen worked again as funny, allthough the support did nothing on the device as they said in the delivery.
A bit skeptical but with alot of happiness i kept on flashing some ROMs after that.
Now, after i found a good ROM and kept this one on my device for some days the screen doesnt work again.....
This is what my bootloader says right now
Code:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
....seems like the HardSPL is still there......
Honistly i had to apollogize (maybe too late) that this part of using a cellphone (flashing a ROM using HardSPL etc.) is a big fish and that ive underrated it. Now i have a 400$-Device which aint work anymore
Ive read like all Tutorials here at xda-devs containing something about flashing a ROM or informations about SPLs; tried everything
I feel like im lost and fu**ed right now....
Is there any1 can help me with my problem?
Hopefully there is.....i pray for him
first flash a stock rom
then just run the hard-spl exe, and replace the ruu_signed.nbh file
why are you trying to use kaiser spl?
use the things found in the hardspl sticky in the xperia section
Wrong Tutorial
You're using tutorial for wrong device (HTC Kaiser)
The correct tutorial is in first post (extra how to: how to restore Stock SPL for warranty reasons.)
http://forum.xda-developers.com/showthread.php?t=431218
But before restoring original hardspl you should flash with original rom found in this thread http://forum.xda-developers.com/showthread.php?t=475482
wow thanks for your answers !!
i never thought ill get response.
Its really weird that i havnt found that tut before bcuz i was looking through whole board.
I will try do that tomorrow.
I hope that it will work then. Don't wanna pay 300$ for a new device
Else there is mtty to restore the bootloader
Aight i have done the steps showing in the tutorial.
1. I have flashed teh Stock ROM (R2A german - Vodafone)
2. I've used the RUU with the stockSPL given in that post.
Now my tricolour screen shows the following
Code:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
This is what it shall looks like OliNex said.
I hope this is all i had to do, to make use of my device's guarantee, cuz the touchscreen still doesnt work
Seems like i really have to send my Xperia to the Support again (now hopefully with a ROM + SPL they wont reject)
But if i send my device with "extraneous" again i have to pay another 15€ just for let them do a costs estimate -.-
I would like to get a reply before i make use of the support again.
Thanks for all your help
Glad to hear recovering to stock rom + spl worked out.
Your touchscreen doesn't work when you have booted up windows?
If that's correct then I suggest to send in the device for service. Although
it might not help I suggest updating your device with SE updating service (SEUS) first.
After the flash remove the battery for 10 seconds, then turn it on.
Hope it helps and otherwise servicing the device is free of charges
Haha!
That's what im doing right now, using SEUS
Thanks for the tip with the battery but i already tried that way too often
Edit:
Ok, touchscreen still aint work....
Time to contact the support...at 11:45 PM **WOOT
nvm....Ill wait till tomorrow
gn8 and thanks for helping me with my issue ^^
a few days ago I returned my silver X1 for the same issue, my touch screen (digitizer) doesn't work. Then right in front of SE support person, he justed took out the battery and rebooted. Then it worked. The thing is, I did the same thing several times earlier that day and it did NOT worked. I am worrying of getting the same problem again and I only have until november 30th until my 1 year warranty expires. I haven't tried any cooked roms and it is because of warranty purpose. Altough I'm not new to custom roms since I own an Alpine and a Prophet. I've been here for some time now.
The thing that holds me back testing cooked roms on my Xperia is the aftermath if in case my device goes half-dead. I almost always read the restoring on to official roms everytime I get here, but still the thousand dollar spent on my phone's tag price comes with a fear of who's gonna rescue if my phone won't work. And to add that spare parts aren't available here as of the moment. And yes I'm eager and very curious about almost everyone saying cooked 6.5 is faster than stock roms but though I haven't tested it I have to disagree for now on my case basis.
First, my Xperia doesn't come with a carrier lock. It's locally called "open line" in my country I guess technically called debranding. Then my phone has the generic r3a rom via seus I think it's generic uk. Lastly, for some reasons, the touchflo 3d doesn't work with my device I've tried it since r1 firmware time. Some response told me to unlock-debrand my phone first but I dont have to since it isn't locked. Still installing tf3d makes my phone hang, doesn't uninstall, doesn't show in the themes list if installed as a theme, and doesn't let me have another panel since it always stay as tf3d whenever I choose another one. And it is very unstable in my device. These happened even if I install it as a panel.
I feel handsets here are faster than handsets that are locked by a carrier so I'm thinking again since for now, my Xperia works for me as stock as it is.