I have a xperia whith a cmEX 08 Rom/Firmware.
I like to delete this and update to WM6.5 or original se Firmware.
I tried to update by using unsigned HardSPL but my xperia lost usb connection.
When I tried to use a sd card whith kovsimgh.nbh the updating prozess doesn't start, the system hanged.
Also I tried to restore a rom backup from an other xperia, but when i started after udating prozess, cmEX still was there.
Can you help me ?
Related
Mates,
i flashed my X1 with itje's WM6.5
i noticed that it doesn't support the arabic packages supplied with my device so decided to go for Toutch-IT 4.5
using SD card method, i'm trying to flash and it's stucked at arround 15%
should i turn it of or wait?
what will happen now?
what are the risks?
cheers
edit HardSPL is there.
offed it
tried again
same problem
copeid the Image again to SD
Flashed successfully
thanks people
Hi there
I've got a problem with my X1. I did a hardspl which was successful and then i updated to a custom rom using the minisd card version. After a few days my xperia was restarting repeatedly during the night. This was fixed however by taking out the battery and putting it back in.
But this problem happened again a day or two later so this time i decided to reflash the ROM and still it didn't fix it. Now all my xperia does is restart, it gets to the green windows logo screen, sometimes the top task bar may load and then it restarts.
I've tried the following solutions:
1. Reflashed rom to a stock rom
2. took out the battery, minisd card, sim card.
3. Changed battery.
I cannot change the spl back to the stockspl because if i connect it to the pc, it does not recognise it as a valid usb device.
Does anyone have any suggestions or is it a bricked device?
Can you flash with SEUS? I'm not sure if SEUS works with HardSPL though...
Firefall! said:
Can you flash with SEUS? I'm not sure if SEUS works with HardSPL though...
Click to expand...
Click to collapse
HARDSPL don't work with SE update service.
Install original R3 ROM with microsd metod.
I;ve tried the R3 and R1 original ROM and i still have the same issue.
hi Man
I have same problem sense 4 days my phone just restart
I also try all solutions but it's not work
any one can help us
thanks
So , why did U do with ur problem????
u can check this thread
http://forum.xda-developers.com/showthread.php?p=4714723#post4714723
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
PCServe said:
Hi,
I have some trouble on upgrading my Xperia X1 to Windows Mobile 6.5.
I tried to upgrade some months ago with the same error. Now I finally wanted to upgrade, but it doesnt work.
Ive read several instructions here and on a German board, but unfortunately without any success.
The only thing Ive noticed: HardSPL says, that I am running version 1.05.x on my phone and the new version would be 1.00.x, could this be the reason for the breakdown?
I am also looking for a current German Rom for the X1. The one I tried is from http://forum.xda-developers.com/showthread.php?t=526133
I'm not sure, if there are any newer versions, but it would be nice, if someone could help me.
Here is what I did:
- downloaded the german rom, mentioned above
- unpacked the kovsimg.nbh and put it onto my SD card
- started the HardSPL with the instruction
-> error 260 at 0% (after like 1 minute)
Please help me, I dont know, what I am doing wrong
Click to expand...
Click to collapse
not many details, but let's see
you successfully flashed h-spl (from olinex thread)? and when trying to flash custom rom you get the error 260? that right?
ensure to use customruu for flashing and not the ruu (hardspl.exe) from h-spl thread
if you use sd for storage of rom image, why not flash using sd-method in the first place?
a newer german rom is here
I've tried this Rom. its perfect, it works good and fast.
but my problem with this is:
when i make soft reset my phone starts at the Hard reset screen. and i have to reinstall my softwares again.
is there and solution by this problem???
Tnx.
Try to flash some other ROM.
hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.
saieed91 said:
hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.
Click to expand...
Click to collapse
i had the same problem....Try flashing the stock ROM it works
How to get x1 6.5.5 rom...
hi guys ...do some one know how i can Get 6.5.5..Rom for my sonyericsson x1..
i HAVE BEEN SEARCHING FOR DAYS.....PLEASE HELP!!!!
Hi there
Hi there
By searching through the internet you can find lots of ROMs for your X1, but the thing that is very important is; the Rom that you choose should be reliable, faster than any other previous ROMs and known.
If you are interested to change your x1 rom 1st you need to unlock your x1. You can find the unlock tools and its instruction on the forum. And 2nd you can copy the topic title and paste it on the google to find the download links.
By the way, I recommend you this Rom it's very very great.
XPERIA X1 ROM 826X Windows Phone 6.5.5 build 23518 (New UI)
Hy to all and sorry my bad english.
I have a problem with my X1.
Originaly had Windows mobile 6.1 stock.
I want to change rom, I hardspl, i install new rom, all ok, no problem. Now i have Windows Mobile 6.5 and I am not satisfied how works.
I want to get back to windows mobile 6.1 stock but I can`t.
If i want to go with sd method , when I boot he don`t see any image rom`s on sd.
If I want to hard spl or boot from desktop, conects ok, but when the phone restart to enter in bootloader the conection goes off.
All what I can do is to reinstall (reset) this version what is in the phone memory WM6.5. Anithing else don`t work. No mather what rom i choose or what method.
On bootloader: Kovs 110
SPL -0.78 0000
MicroP1 787
MicroP2 707
Thanks a lot and a great day!