can you still flash roms even if its locked to a specific carrier..? or does it have to be unlocked?
Yes, you can flash and Rhodium ROM once you have hard SPL
Dave
Related
Hi,
I wanna use mtty.exe and the rtask-command, but the bootloader is not old enough (not 1.04).
Is ist possible to downgrade the loader and if yes, where can I get an old one?
Thanks a lot for your answer.
Sebastian
SKL74 said:
the bootloader is not old enough (not 1.04).
Click to expand...
Click to collapse
AFAIK there is no 1.04 bootloader for Trinity.
There is a 1.05 MFG SPL for Trinity with rtask.
Used to be available as a part of HTC test ROM in Trinity firmware downloads section in Trinity wiki.
Thanks for the information.
Think, I'll test the HTC test ROM.
Regards
Sebastian
There's no easy way to downgrade, though.
It's also not necessary... Use Des's SSPL to boot your device with SPL 1.05, not risking bricking it by flashing SPL.
Hey Guys,
sorry, I´m searching the whole time after how to flash just an spl, for an extracting I used the NBH util.
My plan:
1) I want to flash my O2 branded Diamond, without flashing a hardSPL.
2) As I understood, it´s possible just to extract an SPL from the newest HTC rom, and flashing this with DiamondCustomRUU in the first step.
3) After this I should have the possibility to flash a full HTC Rom?
Are there any misunderstandings? because I can´t flash the extracted SPL with DiamondCustomRUU.exe.
What did I wrong, and what should I do?
Cheers, Chris
No one any idea???????????????????????
it might be possible to do this!
but you have to be careful not to get device ID/version different on both the OS or the SPL!
but why not just put hard spl and then revert back to stock SPL when you want to at a later stage! all versions of the stock SPL are availble on the rom developement forum
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
tehCORE said:
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
Click to expand...
Click to collapse
softspl aka sspl is only used for flashing spl's. You can't flash a rom using a sspl. Why do you think the Hardspl is created???????
thought
sspl -> temp fix
hspl -> perm fix
With the softspl you flash the hard spl and then you flash a rom with it
tehCORE said:
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
Click to expand...
Click to collapse
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
cmonex said:
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
Click to expand...
Click to collapse
oh did not know that, thanks for the enlightenment
after upgrading my rhodium from 6.1 to the official WM6.5, the SPL also change from 0.84 to 0.87.
i am now planning to flash hardspl then flash another cooked rom, and want to use the official WM6.5 as backup.
so does the 0.79 relocker still applicable to my phone if later i want to restore it for warranty reason?
or should I get a 0.87 relocker? (if so where can i get it?)
thanks alot for answering.
The .079 relocked should work if you re-flash a stock 6.1 ROM.
If you don't have one for your carrier you should still be OK. I'll enquire with cmonex about a 0.87 relocker.
Thread closed, could have been posted in one of many exsisting threads.
Dave
Hi,
I have a Dutch Touch Pro2 (unbranded) which I would like to return for warranty (some buttons on the keyboard aren't functioning properly) and I don't know much about SPL...
I've flashed the stock HTC Touch Pro2 ROM which I found at the HTC website. Now is my question:
Should I also flash back a stock SPL or is that included in the stock rom?
If not, where could I find it, and how should I flash it back?
Greetings,
Job
you have to flash "stock" hardspl back. I know as much as you about hardspl, sorry i couldn't be of more help :\
Yes, it does contain the SPL.
HardSPL by OliNex does contain a black, so the SPL doesn't get changed.
Hi Jackos,
I've flashed back Stock SPL 0.87... So when I now update my ROM, should it change the SPL then to the SPL included in that rom?
found it here by the way: http://forum.xda-developers.com/showthread.php?t=550131
Job
j0bb13 said:
Hi Jackos,
I've flashed back Stock SPL 0.87... So when I now update my ROM, should it change the SPL then to the SPL included in that rom?
found it here by the way: http://forum.xda-developers.com/showthread.php?t=550131
Job
Click to expand...
Click to collapse
yes it will.
awesome then my problem is solved!
Thanks.