Hi,
My waranty ends tomorrow and i need to sent the phone to service but i 1st need to remove Olipro boot loader, a replace it with the original one.
CAn anyone help me please.
I believe that flashing an original ROM using SSPL (to work around HardSPL) should do the trick.
Sorry for the noob question... But how can I flash using SSPL and not HardSPL?
Thank you in advance
Related
My MteoR can´t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?
HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!
Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
tehCORE said:
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
Click to expand...
Click to collapse
softspl aka sspl is only used for flashing spl's. You can't flash a rom using a sspl. Why do you think the Hardspl is created???????
thought
sspl -> temp fix
hspl -> perm fix
With the softspl you flash the hard spl and then you flash a rom with it
tehCORE said:
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
Click to expand...
Click to collapse
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
cmonex said:
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
Click to expand...
Click to collapse
oh did not know that, thanks for the enlightenment
Hello guys
I have been dying to flash my blackstone for a while now but i was scared of damaging it.
Anyway i went through all the tutorials (tyvm to everyone) and i think i am finally ready.
I just want to check a few things before i go for it.
Please correct me if i am doing something wrong thanks in advance.
My spl is 1.14.0000.
so i need to upgrade it to official spl 1.54.
Question: 1. I want to use USPL i understand that dosnt void my warranty right?
I downloaded all files in cRaCKwHoRe's TUT
in order to do that.
I have also updated my usb drivers.
I have a copy of Duttys' 3.9 Rom.
Questions: 2. If i upgrade to spl 1.54 from that post i wouldent need to reswitch it ever to 1.14 for warranty purposes right?
3. Are their any risks at all of bricking the device while flashing?
4. I tried downloading the official rom upgrade why did i get a ''this rom is not for your device message"?
5. I read their is a way of flashing from the sd card i understand i need a BLACIMG.NBH file where can i get it is there a Tutorial for this?
6. My phone is Branded should i save/backup the stock branded rom just in case?
Sorry for the long post
Thank you.
Jay
j1978 said:
Hello guys
I have been dying to flash my blackstone for a while now but i was scared of damaging it.
Anyway i went through all the tutorials (tyvm to everyone) and i think i am finally ready.
I just want to check a few things before i go for it.
Please correct me if i am doing something wrong thanks in advance.
My spl is 1.14.0000.
so i need to upgrade it to official spl 1.54.
Question: 1. I want to use USPL i understand that dosnt void my warranty right?
I downloaded all files in cRaCKwHoRe's TUT
in order to do that.
I have also updated my usb drivers.
I have a copy of Duttys' 3.9 Rom.
Questions: 2. If i upgrade to spl 1.54 from that post i wouldent need to reswitch it ever to 1.14 for warranty purposes right?
3. Are their any risks at all of bricking the device while flashing?
4. I tried downloading the official rom upgrade why did i get a ''this rom is not for your device message"?
5. I read their is a way of flashing from the sd card i understand i need a BLACIMG.NBH file where can i get it is there a Tutorial for this?
6. My phone is Branded should i save/backup the stock branded rom just in case?
Sorry for the long post
Thank you.
Jay
Click to expand...
Click to collapse
post this in the tutorial thread to get a answer..
my topaz needs a service and i restored the original and rom. when i used the relocker that is provided by olinex, my device is not booting. i need help please. my device shows that its running stock spl 1.33.0000. when i come to flash another rom (sock rom) it will not allow me to do so.it says not allowed please help me.im begging
Hey. If I am not wrong, you need to load the stock rom before lock it with SPL again.
So what I would do is try to HSPL again, load the stock rom and then lock it with the SPL.
Hope it works. There are a few threads that shows you how to load the stock rom back in order to send it to HTC warranty service.
Cheers.
it wont let me load hspl. it will say not allowed for some reason
please tell us exactly your steps ...
never mind. i was getting errors because i was trying to install a rom that was not meant for my phone after i put the stock spl and i didnt know that europe had more than one wwe version