Database Develop

why cant i cid unlo

Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
Well TIA,
Whatismyphonecalled?

anybody? please, i really need help. would it help if i used lokiwiz 0.3 instead of the older .2?

whatismyphonecalled? said:
anybody? please, i really need help. would it help if i used lokiwiz 0.3 instead of the older .2?
Click to expand...
Click to collapse
DOUBLE POST ?
You don't have to double post in every subforum and start a new thread to get your answer,wait for someone to help you out.This Forum is full of info relating to your problem,you just have to search and read,instead of posting and looking for shortcuts,don't be a lame.
Check your other thread .

i love to see newbie bricks !!
Before playing with CID unlocking procedure, do you know what are you doing?? Why do you want to unlock your CID?? Do you have G3 or G4 device?? Is the ROM safe for your device generation??
People... read. Otherwise you will brick your device.

I was involved in a small issue where lokiwiz wouldn't see my device, and it turned out to be a firewall. I was using my corporate laptop and they have some stupid crappy sygate firewall on there and I am unable to disable it or turn it off (even though I have "Administrative" rights). When I took it home to my home PC that was basically a sparkling clean install of Windows XP x64, everything worked as the directions said that it would.
Jason

Please help with flash problem
whatismyphonecalled? said:
Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
I have the same problem. I bought a T-Mobile MDA from ebay and it has the 2.26 OS. I've been trying to install the new wm6 on the phone, but right before the update process starts, the active sync disconnects and the screen displays the colors. I've been tring this for months but been failing. I honestly need some help so if there is anyone out there who knows the solution to my problem, please help me.
Click to expand...
Click to collapse

benjaminb007 said:
whatismyphonecalled? said:
Hello everyone. I have a Cingular 8125. I would like to know why when i try to cid unlock my phone, enablerapi does not do anything (restart my phone), and the lokiwiz.bat can not see my phone, even though everything else. Does it mean that my phone is already CID unlocked? Also, when i try to do it without the cid unlocker, my activesync connection shuts off after 30 seconds, and my phone needs to be reflashed. I baught the phone used off of ebay. It came with the original cingular ROM. I am trying to get WM6 on it.
I have the same problem. I bought a T-Mobile MDA from ebay and it has the 2.26 OS. I've been trying to install the new wm6 on the phone, but right before the update process starts, the active sync disconnects and the screen displays the colors. I've been tring this for months but been failing. I honestly need some help so if there is anyone out there who knows the solution to my problem, please help me.
Click to expand...
Click to collapse
Your phone is not CID unlocked,to verify if it's CID locked or unlocked,download the WST tool and run the 'CID Action' button to verify.
Cheers
Click to expand...
Click to collapse

Have you unlocked your Jade?

Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila

I actually tried few times yesterday and today, but I am getting "Server is down" message .

i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.

I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.

I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)

Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.

fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .

i did it with the first attempt with v3, no problem and i'm really happy

Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.

estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.

for me dont work the hard spl....

I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?

fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you

no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)

the link is dead!!

lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works

keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.

Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model

Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.

it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK

major trouble after attempting ROM upgrade

ok, so I tried to upgrade to 1.56 (stock), and yes I now have the dodgy looking screen and phone is stuck in 'Phone Off' mode.
I didn't think I needed to do anything other than run the exe from HTC.
so, anyway..yes I'm screwed.
I've got the list of instructions from an earlier post about flashing 1.56, and am trying to follow them (seems my phone has Olinex1.14 on it - which I've never used as I've never flashed this phone before)
but..I can't connect to my phone, when I plug the usb cable in, I get the screen which asks me which type of connections I want Active sync, disc drive etc, but the screen on my phone is totally unresponsive. the screen then disappears and I'm nowhere...
If I can't connect to my phone, how do I run the file to flash back to 1.14 as per the instructions?
thanks

hm i would try it in bootloader mode?

USB
twisted-pixel said:
ok, so I tried to upgrade to 1.56 (stock), and yes I now have the dodgy looking screen and phone is stuck in 'Phone Off' mode.
I didn't think I needed to do anything other than run the exe from HTC.
so, anyway..yes I'm screwed.
I've got the list of instructions from an earlier post about flashing 1.56, and am trying to follow them (seems my phone has Olinex1.14 on it - which I've never used as I've never flashed this phone before)
but..I can't connect to my phone, when I plug the usb cable in, I get the screen which asks me which type of connections I want Active sync, disc drive etc, but the screen on my phone is totally unresponsive. the screen then disappears and I'm nowhere...
If I can't connect to my phone, how do I run the file to flash back to 1.14 as per the instructions?
thanks
Click to expand...
Click to collapse
If you take the battery out and make sure the USB is not connected.
After a few seconds, put the battery back in.
Next press the down button on the side of the phone and keep it pressed, press the power button as normal.
Does anything appear on the screen?
Next, if you get the coloured screen with 'Serial' at the bottom, if you plug in the USB cable and connect to a PC, does 'Serial' change to read 'USB'.
If it does all of this, your phone is not dead.

I've had to try a different machine..which is working....thank god.
but the issue now is that our virus software is preventing me from downloading USPL2.5, is there another way to to use this file? I know that people have experience issues with this before (although not necessarily this particular file) and they have used a wrapper to bypass the virus protection pop up

ok..ignore that...I don't need it, my phone is not CID locked.
thanks to everyone though. I was in major panic mode for a while

I was going to try the Stock HTC ROM upgrade tonight, but my phone is an early Orange no splash screen or orange branding but it definately locked to orange....
do I have to unlock it prior to doing even the HTC ROM upgrade?

Geeba said:
I was going to try the Stock HTC ROM upgrade tonight, but my phone is an early Orange no splash screen or orange branding but it definately locked to orange....
do I have to unlock it prior to doing even the HTC ROM upgrade?
Click to expand...
Click to collapse
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.

cRaCKwHoRe said:
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.
Click to expand...
Click to collapse
Hey there i had a quick question my telstra HD comes in today. Can i just run the USPL and then load the updated ROM your talking bot off the site? Other wise i was going to load a Dutty's. Sorry to go off topic

cRaCKwHoRe said:
You may have to. Just try the rom upgrade. If it yells something about an "invalid vendor ID" just use USPL to apply the rom upgrade. If you need information on how look at the guide in my signature.
Click to expand...
Click to collapse
Thanx crackwhore! appreciate the pointers... pretty new to phones... I tend to hack consoles etc!

ratchetjaw said:
Hey there i had a quick question my telstra HD comes in today. Can i just run the USPL and then load the updated ROM your talking bot off the site? Other wise i was going to load a Dutty's. Sorry to go off topic
Click to expand...
Click to collapse
Yeah you can load any 1.56 rom whether it is cooked or original using USPL (if your SPL is 1.54.0000 in the bootloader).

cRaCKwHoRe said:
Yeah you can load any 1.56 rom whether it is cooked or original using USPL (if your SPL is 1.54.0000 in the bootloader).
Click to expand...
Click to collapse
Ok thanks for the quick response. I am going t follow your sticky once i get home and get the phone. If i dont have he 1.54.0000 i will put it on there. Kind of excited and nervous at the same time lol

ratchetjaw said:
Ok thanks for the quick response. I am going t follow your sticky once i get home and get the phone. If i dont have he 1.54.0000 i will put it on there. Kind of excited and nervous at the same time lol
Click to expand...
Click to collapse
Understood I was too my first time...

[Q] Did I brick my TP2?

Hello,
I have put a cdma rom on my gsm Tp2.
It doesn't boot anymore
I cannot make connection with my computer.
What can I do?

with phone off hold down the volume key while pressing power key & your phone should boot into bootloader mode (tri-color screen) at the bottom it should read serial now plug phone into computer via usb cable and flash a rom tell me if it worked!

lol I did that the very first time I flashed a phone...dont feel bad.

i did it too!

hatsiflatsi said:
Hello,
I have put a cdma rom on my gsm Tp2.
It doesn't boot anymore
I cannot make connection with my computer.
What can I do?
Click to expand...
Click to collapse
lol good luck. hope u dont really sound like borat

It's not bricked, you can just do what waffles said above, and you will be able to flash the correct ROM.
However, please be very careful not to flash the wrong type of radio to your phone, otherwise it *will* be permanently bricked.

Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!

hatsiflatsi said:
Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!
Click to expand...
Click to collapse
Simple answer, you don't need to It's just easier for new people.

hatsiflatsi said:
Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!
Click to expand...
Click to collapse
No problem! im always happy to help.

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......