Hello,
I have put a cdma rom on my gsm Tp2.
It doesn't boot anymore
I cannot make connection with my computer.
What can I do?
with phone off hold down the volume key while pressing power key & your phone should boot into bootloader mode (tri-color screen) at the bottom it should read serial now plug phone into computer via usb cable and flash a rom tell me if it worked!
lol I did that the very first time I flashed a phone...dont feel bad.
i did it too!
hatsiflatsi said:
Hello,
I have put a cdma rom on my gsm Tp2.
It doesn't boot anymore
I cannot make connection with my computer.
What can I do?
Click to expand...
Click to collapse
lol good luck. hope u dont really sound like borat
It's not bricked, you can just do what waffles said above, and you will be able to flash the correct ROM.
However, please be very careful not to flash the wrong type of radio to your phone, otherwise it *will* be permanently bricked.
Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!
hatsiflatsi said:
Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!
Click to expand...
Click to collapse
Simple answer, you don't need to It's just easier for new people.
hatsiflatsi said:
Dear waffles510,
It worked. Thanks, many thanks. I walked around with my spare Nokia today wich was a nightmare. I missed al the tools on the TP2.
Now I wonder why I need to connect with the WMDC normally.
Thanks!
Click to expand...
Click to collapse
No problem! im always happy to help.
Related
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
i'm glad i solved the problem.. just entered manually in bootloader then flashed a original qtek rom and it fine now
thanks anyway, hope this help other people in this very situation
bye
cheers from portugal
W4R_M4ST3R said:
Hi guys, i've been around sometime in the "qtek" world and had owned some of them in the past, now i own a wizard and i expect to begin mastering the thingie..
The problem is that after some experiments i have this problem :
I think it is not bricked.. it boots the OS but it is so sloowww with stops everywhere, takes like 4times the time to open "settings" than before. and it does not turn the charge light on and is not recognized by usb port so it does not sync and i'm unable to re flash it..
What i did was to downgrade it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
and then i stick the AKU3.2-1.0RC1
It has been cid unlocked by me yesterday and was working fine with another rom..
I was thinking of entering bootloader manually and then somehow flash it..
Please Help
thanks !
Click to expand...
Click to collapse
You can't go from 1 to 3. Re-flashing a stock ROM was a good move.
--M
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
zorrozorro said:
Hi W4R_M4ST3R!!!
I think i have exactly the same problem as you had!
I have installed new ROM, and my T-mobile MDA Vario working veeeery slow, and i could not connect it to my computer!!!!!!
Tell me please (in details) what did you do with your phone.
Thanks!
Click to expand...
Click to collapse
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
_Nomad_ said:
This topic has been discussed in length all over the forum. But, here we go again. This will be based on you having a G3 device.
1. Make sure that your device is CID unlocked. if not follow the sticky thread at the top of this forum. and read through all of it BEFORE you begin
2. make sure that you have ipl/spl 2.x
3. Now upgrade to any rom you want.
Click to expand...
Click to collapse
How can i upgrade my ROM if i could not connect my phone to the computer! The main problem is that i could not syncronise my phone and my PC.
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
_Nomad_ said:
enter bootloader mode... press the two buttons (camera & voice command) while resetting the device. you should get a screen that's red, green and blue. from there you can reflash your device. if that doesn't work, your phone is bricked
Click to expand...
Click to collapse
Thank you!!
Could you explane me a bit more precise what does it mean bootloader and reflash? Does it mean that i can syncronise phone and computer when i have RGB on my screen?
When you've got your device in bootloader mode just plug it in and start the upgrading procedure
_Nomad_, thank you!
It works now!!
zorrozorro said:
It works now!!
Click to expand...
Click to collapse
Like music to my ears
Hi,
I hope if someone can tell me how to get into the boot sector, cause someone I upgrade to t-mobile 2.26 and it won't like me activesync at all, or any connection with my comp. I'm wondering if I go into the boot section or whatever it's called, can I access usb again so I can put an offical HTC rom in it? or fix this problem. Any help is [email protected]! thanxs guys, I try search for it, didn't have much luck. wow, this rom is really screwed ....I can't even plug in my power to usb. No charging light up or anything.? Has anyone ran into this before?
g0dblissyou said:
Hi,
I hope if someone can tell me how to get into the boot sector, cause someone I upgrade to t-mobile 2.26 and it won't like me activesync at all, or any connection with my comp. I'm wondering if I go into the boot section or whatever it's called, can I access usb again so I can put an offical HTC rom in it? or fix this problem. Any help is [email protected]! thanxs guys, I try search for it, didn't have much luck. wow, this rom is really screwed ....I can't even plug in my power to usb. No charging light up or anything.? Has anyone ran into this before?
Click to expand...
Click to collapse
While holding both buttons on right side of phone, poke the stylus in tinyhole. This will put it in boot loader mode.
Awesome!
thanxs for the quick reply ...got it, was able to go into boot usb work again now flashing to another rom offical one this time.
thanxs a bunch. Love this forum.
g0dblissyou said:
thanxs for the quick reply ...got it, was able to go into boot usb work again now flashing to another rom offical one this time.
thanxs a bunch. Love this forum.
Click to expand...
Click to collapse
Glad to help, good luck.
Hello,
I've searched a lot how to put the Herald in the boot loader mode.
Please, help me.
Thank you advance.
LAter edit: i found out: i had to keep pressed the camera button lol
If you searched a lil bit more you'll find that piece of info in herehttp://wiki.xda-developers.com/index.php?pagename=Herald_Resets
in the Wiki herald section
sandibad said:
Hello,
I've searched a lot how to put the Herald in the boot loader mode.
Please, help me.
Thank you advance.
LAter edit: i found out: i had to keep pressed the camera button lol
Click to expand...
Click to collapse
and in nearly everypost about unbricking and flashing.
Pleas read, read, read.
and btw: commmanager + camera + softreset.
Looking for
In fact, i read houdreds of time all the posts... at 5 AM...
Because by Herald was in the "white screen" and i was desperate...loking for solution ...
In fact, I have to wait for the official WM6 because that one didn't worked for me.
Thks for assistance.
papamopps said:
and in nearly everypost about unbricking and flashing.
Pleas read, read, read.
and btw: commmanager + camera + softreset.
Click to expand...
Click to collapse
No need to press comm.button. Just press camera and softreset at once, release the softreset first than camera button. That's all!
nugift said:
No need to press comm.button. Just press camera and softreset at once, release the softreset first than camera button. That's all!
Click to expand...
Click to collapse
OK. Thanks
BTW - my device is unbricked. BUT it was made by repairservice - for warenty. lol.
I´m happy again. Hehe
papamopps said:
OK. Thanks
BTW - my device is unbricked. BUT it was made by repairservice - for warenty. lol.
I´m happy again. Hehe
Click to expand...
Click to collapse
Damn you did not have to pay?? sweet!
Newbie here.....
I have an HTC P4350. During the upgrade, there was a disconnect with my computer to the phone, now I have that colored screen when I start up. I tried the hard and soft reset and also the Boot loader method.
Anyone have any other suggestions?
Do you think if the phone went back to HTC, they would be able to fix it?
Thanks for your help
You should be able to flash the original RUU when you're in bootloader mode ('the three colored screen') and connected to the PC with your USB cable. Worked for me anyways.
Just put your phone in bootloader mode, connect it to your computer and run the RUU.
R_phAn said:
You should be able to flash the original RUU when you're in bootloader mode ('the three colored screen') and connected to the PC with your USB cable. Worked for me anyways.
Just put your phone in bootloader mode, connect it to your computer and run the RUU.
Click to expand...
Click to collapse
The problem is that it won't connect to the computer via activeSync, until that happens the phone cannot be updated.
passmoregas23 said:
The problem is that it won't connect to the computer via activeSync, until that happens the phone cannot be updated.
Click to expand...
Click to collapse
Have you tried it before you said that it would not work? Seriously? When in bootloader mode, the computer doesn't connect via activesync (how could it, there is no operating system on the phone). Get into bootloader mode, connect the phone to the computer (yes, i know activesync doesn't show a connection at this point) and run the stock RUU for your device. If this does not work, then there is something seriously wrong with your device.
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
dcmtnbkr said:
Have you tried it before you said that it would not work? Seriously? When in bootloader mode, the computer doesn't connect via activesync (how could it, there is no operating system on the phone). Get into bootloader mode, connect the phone to the computer (yes, i know activesync doesn't show a connection at this point) and run the stock RUU for your device. If this does not work, then there is something seriously wrong with your device.
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
Click to expand...
Click to collapse
To add to this, when in bootloader and plugged into your PC, it will say "USB" at the bottom. That's how you know it's connected properly.
If you're having troubles and you're running Vista...
http://www.modaco.com/RUU-Vista-done-u-t252977.html
dcmtnbkr said:
I honestly wish people would try things first before claiming that it didnt work, I know i have not posted that much, but that is because i search the forums for the questions i have, rather than wasting the time of the people who are doing all the cooking (for free might i add) and getting on their nerves.
Click to expand...
Click to collapse
Dude, I have searched for a resolve to my problem, and I do appreciate peoples help. I don't waste time of good Samaritans. I did run the RRU and I received an 260 error, which is another topic which I did research on as well.
I'm going to send the phone back to HTC and let them fix it.
Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)
Just a thought but...you might want to check the Kaiser forum instead...
Posted in Titan forum. Moved to Kaiser forum.
You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave
uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)
Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.
Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.
im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
i tried that unlocker, but got stuck after flashing Radio 1.20, couldnt proceed into windows after that. eventually had to unlock it by code for a tenner, try this out if you cant unlock it by yourself. http://shop.ebay.co.uk/merchant/gadget_international
showtime21 said:
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
Click to expand...
Click to collapse
unlock to do what? load custom roms?
if so, ur doing the wrong procedure. The phone isnt locked as its CDMA and if ur using an unlocker to load custom roms...
mixxy said:
unlock to do what? load custom roms?
if so, ur doing the wrong procedure. The phone isnt locked as its CDMA and if ur using an unlocker to load custom roms...
Click to expand...
Click to collapse
yeuh thats all i really want to do i'm trying to load custom roms so im pretty noob so what shud i do ?
showtime21 said:
yeuh thats all i really want to do i'm trying to load custom roms so im pretty noob so what shud i do ?
Click to expand...
Click to collapse
yeah i'm pretty much where you are, noobage and all. and i found this to be really helpful http://forum.ppcgeeks.com/showthread.php?t=36062
ufbritt said:
yeah i'm pretty much where you are, noobage and all. and i found this to be really helpful http://forum.ppcgeeks.com/showthread.php?t=36062
Click to expand...
Click to collapse
yeuh i tried that, the diamond unlocker is giving me problems with all the errors, it doesnt even get to the bootloader screen. do any of you know if therre is active sync for 64-bit vista ??
You need to download windows mobile device center.
rogerluo1985 said:
i tried that unlocker, but got stuck after flashing Radio 1.20, couldnt proceed into windows after that. eventually had to unlock it by code for a tenner, try this out if you cant unlock it by yourself. http://shop.ebay.co.uk/merchant/gadget_international
Click to expand...
Click to collapse
pfft, for a tenner you could have got help on that program from us (OliNex)
showtime21 said:
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
Click to expand...
Click to collapse
you should use the ppcgeeks link, and just make sure your WMDC is the latest version from microsoft
Vista/7 + my CDMA bell diamond = does not play very well.. XP works fine..
I have to go into bootloader in order to flash anything, be it unlocker, rom or radio. take off back casing, make sure phone is in standby and press and hold the volume down, reset button beside the battery, and the the power button until it goes into the bootloader (i.e you are holding down the three buttons at the same time)
Its hit or miss for some people, but you definitely need the newest version of WMDC so I would try that first. Some people even need to disable USB connections in WMDC in order for it to work too.. so try these two things first, and if that does not work try going into bootloader..
My Bell Diamond needed to be unlocked! however, i couldn't do it on my laptop running vista, the program kept crashing. get an XP computer, run activesync on it, download the CDMA unlocker, and run it! VOILA. you should have no issues loading custom roms on your phone on vista tho! G/L