Related
Hi,
I need some assistance. I am currently cooking my extended rom. My Extended rom does not have enough space so, i am putting some of my MUST HAVE softwares in my storage so that it installs after a HARD RESET.
But, most .cab files will auto delete upon launch. Is there any way to make
it not delete ? Kindly assist.
Thanx a million
You can avoid the CAB files being deleted by making them read-only.
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
i have tried that but, dont work
All my "wanna hang on to" .cab's are write protected, and non of them get deleted upon installation.
Manuel installation that is.
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
ermm.. how do i go about it... i wanna auto install stuff like Pocket Informant , SPB Pocket Plus and my must have s/w upon hard reset
Thats why i need to coookkk
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
bosjo said:
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
Click to expand...
Click to collapse
well, i dont seem to find anything of what i am looking for
Wait a day or two, maybe someone who knows come along.
You can use a software name Cabinst wich let you install a cab without deleting it.
Easy.
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Shikra said:
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Click to expand...
Click to collapse
change which part of it ?
http://forum.xda-developers.com/viewtopic.php?t=16377
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse
keep the ext rom empty,
after reboot hack the reg to point to new area.
Run the autorun from threre.
Have all files as read only.
info under
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
Only problem is that all cabs are installed in the default location.
I have yet to get cabinstall to run in batch mode using the nscript tool.
Hope its what you are after
No matter what ROM I use, whether its the latest official O2 one or "Pugs" Edited version of it with the 1.03 Radio version, it ALWAYS installs the O2 Active UI.
After every Hard Reset, once Windows has been set up, the device ALWAYS says "Customising in 3 Seconds" and then starts to run a load of installers on which the cancel button does nothing. Then, after these have finished, it asks the "Personal or Corporate" question, and whichever I tick, the O2 Active application is ALWAYS installed at the end of this.
How can I get rid of it? From what I have read, selecting "Corporate" stops the O2 Active program getting installed, but this is NOT true, atleast, not on my XDA2i.
Is it possible to get my device working with Pugs edited latest ROM version with Radio 1.03, WITHOUT having O2 Active installed on it?
Any help would be appreciated, as it is probably a simple fix,
thanks,
Darren
it does
once it asks you for personal or corperate
put a tick in corerate and just underneath enter a password 0506 & that will put it into corp mode
& if you want to gprs settings here they are
connection name
mobile web
modem
cellular line gprs
access point
mobile.o2.co.uk
user name
o2web
password
password
advanced
use server assigned ip
servers
use specific
193.113.200.200
193.113.200.201
Re: Corp install and phone carrier settings
When the option screen appears, if you do not put the corp settings in, it will automatically default the UI install after a few seconds, after you put the code 0506 I think you have press 'enter'.
For your installation of GPRS/WAP/MMS, please follow this link. http://forum.xda-developers.com/viewtopic.php?t=26463 As I have uploaded all the latest Mobile carrier cab installs (V2.0) for the UK, for both contract and PAYG. Just copy the correct cab to your pda device and click to install, simple as that. :lol:
Turns out I bodged my own solution to this problem!!
When it tells you it will Customise the Device in 3 Seconds, Press the SOFT RESET button!
This will reboot the XDA2i into Windows and will NOT run any of the O2 Installers, and so none of the O2 Active will be Installed.
This means that I do not even get asked the Personal or Corporate question.
Thanks for the help tho,
Dazzer.
I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks
I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks
I am running WM6, but my company implemented push email, and the device is now app unlocked after installing some certificates etc. I cannot run half of my programs - I tried the SDA-Application.exe program, which seemed to be succesful, but did not work. I cannot open a registry editor either.
I search all over this forum but cannot find the answer - how can I app unlock my wizard again?
We are also about to be issued HTC Touches which are similarly app locked, so it would be useful to have a method that worked for both!
Thanks
have you tried the lokiwiz and awizard apps?
rgs
No - these don't do certificate/application unlocking do they - I thought just CID/SIM locking?
PS I tried installing lokiwiz but I can't due to the app lock!
Both awizard and lokiwiz don't simply remove the Unsigned App Policies nor RAPI communication restrictions. What they need to work is for the phone to be in that state (app+rapi unlocked) and that's why there are some CAB that go along that are supposed to be run prior.
You can use my tool (WST - check signature) that does it with a click of a button
cheers
Great tool - didn't connect on Vista, connected on XP but says:
Not needed!
Regsitry settings are already set to use RAPI tools.
But I still cannot run unsigned apps! I have rebooted. I know they added a root and user certificate to the device - all apps have to be signed now.
Do you have any ideas?
Thanks
Sure, get yourself a registry editor and browse to HKEY_LOCAL_MACHINE\Security\Policies\Policies and edit two values:
:00001006=dword:1
:0000101a=dword:1
hope it does the trick
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
hsclater said:
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
Click to expand...
Click to collapse
Ok, looks like they changed some other settings that interfere with the permissions.
Check if HKEY_LOCAL_MACHINE\Security\CertMod\AllowUntrustedApps is set to DWORD: 1
Hang on I figured it out....the 00001006 key was for some reason not applied once I rebooted. Thanks for all the help!
For anyone needing to do the same - I had to download mobile registry editor from http://mobile-registry-editor.en.softonic.com/pocket as that allows you to edit keys from the PC without installing anything.
My new problem, is that on our touch/elf I cannot change this key with this program as it says access denied - so there must be some registry permissions on there.
hsclater said:
Yes that is set to 1. It should be right?
Click to expand...
Click to collapse
I pointed that because when i set it to 0 the phone refused to install apps so i thought it was the responsible registry value.
Must be another one then...
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
hsclater said:
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
Click to expand...
Click to collapse
I believe those settings are more related to WM6 than to the specific device so they should be the same.
btw, how did you sort it out? I'd like to know for future use
tx
Mine was just fixed by changing the 1006 value. The first time, the phone didn't take the change, but the second time it did and now works.
But the touch, it won't let me edit the registry remotely - access denied.
Cheers.
upload Cert_SPCS.cab to your phone and run it
PS:
sorry for asking but i didn't read your edit before
I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)
I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).
me too...any solution mods?
Same problem here... The default WM6 HTC comm manager is working corectly.
anyone have a cab file of the original? incase i want to revert back to it?
You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!
I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?
pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.
OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs
REALLY A GENIE!!! I'll try it...
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??
hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks
Do a search. You will find that you have to edit the settings in the registry for the comm manager.
I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!
You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.
All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.
I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u
seems to be a connection setup problem with ConnectionSetup_3_1_19202627_00 in Manila 2.5, does this EXT package require a provisioning.zip?
the ConnectionSetup_3_1_19202627_00 alone doesnt setup the device to the network, after checking the settings, they are all still default(blank)
can anyone help me here who knows the solution?
Manila 2.5
The new connection setup uses an extracted provisioning.zip, here´s my package, you have to add your localization files.
thanks a lot dude i will check it out
after cooking the screen is stuck on SIM Card Status "Checking..." what can be done to stop or skip this?
spikegotti said:
after cooking the screen is stuck on SIM Card Status "Checking..." what can be done to stop or skip this?
Click to expand...
Click to collapse
YYYY is right and new connection setup manager use extracted files (what's HTC thinking to add hundreds of files under /Windows just to save time on this rarely procedure???). Try my package to see if this helps.
If you really want to skip this, simply removed the following (and anything underneath):
Code:
HKEY_CURRENT_USER\Software\HTC\BootLauncher\Apps\ConnectionSetup
ok thanks dude, i will try this one
jackleung said:
YYYY is right and new connection setup manager use extracted files (what's HTC thinking to add hundreds of files under /Windows just to save time on this rarely procedure???). Try my package to see if this helps.
If you really want to skip this, simply removed the following (and anything underneath):
Code:
HKEY_CURRENT_USER\Software\HTC\BootLauncher\Apps\ConnectionSetup
Click to expand...
Click to collapse
if i weren't an atheist, i would just call you my god lol, anyway, thanks dude, its all fine now all the best to ya