Hi everyone. Does anyone know whether it would be possibe to have the WM6 smart dialing on a WM5 rom. My hermes running LVSW WM6 defaults to using the WM6 smart dialing, however if you want to enable the video call options then it seems to use the WM5 dailing screen with the old smart dial.
I was thinking, if the WM5 dailing works with WM6, then maybe the default WM6 one would work in WM5 with a bit of fiddling.
The reason i want this is because when i call people i type the name with the smart dial jobby and there they all are. Problem is though that if you then scroll to the one you want and click the wheel it does not give you the option of what number you want to call them on, eg mobile or home. It just dials the last one you used for that person.
In WM6 when you scroll and select it then brings up the contact details so you can choose which no you want to dial.
Few, that took some explaining.
Thanks for your help guys and gals.
Rob
anyone got any ideas ?
just trying to revive this and see if anyone can help
i think it is impossible
Hi All,
This is my first post here...
Has anybody using the Iphone dialpad skin experienced this issue?
You call one of those places where you need to "Press 1 for xxxx, 2 for xxxx", so you touch on "Keypad" to bring the leypad up and enter the number, then when you click on "Call Status" to bring the "Mute", "Speakerphone", etc menu up and the phone hangs completely, you can still hear the conversation, but can't do anything else...
This only happened to me while the Iphone dialpad skin was installed, tried many others and they all work fine, a shame as the Iphone one is really nice.
I've searched the forums but no mention of this issue anywhere.
Thanks,
Fernando.
fpanaggio said:
Hi All,
This is my first post here...
Has anybody using the Iphone dialpad skin experienced this issue?
You call one of those places where you need to "Press 1 for xxxx, 2 for xxxx", so you touch on "Keypad" to bring the leypad up and enter the number, then when you click on "Call Status" to bring the "Mute", "Speakerphone", etc menu up and the phone hangs completely, you can still hear the conversation, but can't do anything else...
This only happened to me while the Iphone dialpad skin was installed, tried many others and they all work fine, a shame as the Iphone one is really nice.
I've searched the forums but no mention of this issue anywhere.
Thanks,
Fernando.
Click to expand...
Click to collapse
Microsoft would see that as a "feature"
yes, this is very frustrating with the Narg iphone dialer.
I am in for a $25 donation if someone will fix it for the Touch!!!!
Yes, I can confirm x5 today that it hangs the whole WM6.5 (Joshs 21725_Light_5-30) any time you access the buttons on the Call Status screen. Only SR will bring back phone..... ukk
And upon further research and trying various other dialers, I can attest that the only way that the Opal dialer works on Kaiser/Tilt WM6.5 is via Anryl ROM (per other user reports) as of today 6/5/09.
So the long answer is, Both iPhone type dialers are broken and will not work and are no longer being developed, and the OPAL one needs fixing to work on WM6.5 ROMs other than Anryls, and I love Josh's ROM too much to change
I se we are digging in the graveyard again ?
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.
I'm looking for 3G dialer with slide 2 answer. I tried to search but I found only dialers without video or without S2A...
Could anybody help me?
I think s2a is a feature of s2a2 and it doesn't matter which dialer you use.
I know mine phone is now s2a with s2a2 and it doesn't matter what dialer I'm using. But I barely know what I'm doing.
I turn off my TF3D and am using SPB MS 3.0
I a problem with my default phone dialer.
- In the dialer, the `Open Contact' option doesn't work. Nothing happens when I select this option either from the icon or `menu'
- I didn't install any other dialer.
- I am using Fun SMS for my sms. But this problem appears before I install Fun SMS
Is there something wrong with my Phone Dialer?
Or can someone recommend me a better Phone dialer?
Thanks a lot
I have the same problem, and I didn't find any solution, so I turn off SPF and use TF3D beacause in car is too diificult to use.
regards
david92 said:
I have the same problem, and I didn't find any solution, so I turn off SPF and use TF3D beacause in car is too diificult to use.
regards
Click to expand...
Click to collapse
Nice to know I am not the only one with this problem......
Can anyone help???
Thanks