Related
I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
hey...
got my xperia for ~ 10 months... but it is more and more impossible to write an message without pushing buttons few times etc.... all in all i think my hardware keybord is not useable anymore :[
is it possible to send it back to SE cause of this issue?! i wrote an mail to [email protected] but received only an automatic mail "AutoReply Sony Ericsson X1 Support" (2 weeks ago)
so... what can i do?! :\
Note : Hi, due to work overload i cannot be active on xda. If you want personal assistance regarding this problem, you can get in touch with me via twitter
www.twitter.com/SiddharthSaiG
Click to expand...
Click to collapse
Before you proceed, please note that I cannot be accountable/liable for any damage caused to your phone. This is only a guide!*
THIS TUTORIAL IS ONLY FOR HTC TOUCH DIAMOND - NOT FOR DIAMOND2 / TOUCH PRO / HD2 ( This is simply because i don't have these devices with me and that i haven't tested! Those who have a spare handset are welcome to send it to me for diagnosis )
Let me get straight to the point. I’ve found out the solution to all the screen blackouts or the famous “microp error”. I’m sure no HTC so called Technical department could solve this.
I’ve been sitting 40Hrs straight with my HTC Diamond. ( The worst part is removing the screw’s and putting them back.)
THE PROBLEM –
1.It’s a hardware problem. Upgrading the microp.dll will not solve anything. ( Microchips gives really wired errors)
2.SYMPTOMS : A dialogue box showing “ Microp version 0 , Upgrade firmware “ (as far as I can remember) , dim or no backlight , no charging indicator , No backlight for physical keys , no touch sense (D button) , soft reset button non responsive..
3.EARLY WARNINGS: (a). If u have dropped your HTC diamond , then there is an 87% chance of this happening. (b.) Exposure to extreme cold/heat. ( if it’s a heat issue then u might need to replace the motherboard.)
THE SOLUTION
I don’t have a cam to record the entire event. But there is a YouTube video of an HTC dissembling. I’ve downloaded the video and put captions in it so that it would be clearer. Video will be uploaded soon.
Diamond de-assembling video - http://bit.ly/bxtcw0 (some Chinese guy , thanks dude)
PROCEDURE
When you remove the back cover , you’ll see
1.The battery
2.Sim card holder
3.Tons of screw’s
Remove all the visible screw’s.Remember , your warranty will get void if you have one!! This tutorial is for ones without warranty. Take a look at this picture :
http://www.twitpic.com/1cymw5
Remove the screw's shown above..
Next Locate the below chip.
www.twitpic.com/1cynw4
This chip is the main cause for the screen problem. This chip wen taken out has 2 connectors beneath it . These connectors wen gone loose causes the screen problem. It will take a few hours to just get them in place. ( HTC need to improve in build design)
www.twitpic.com/1cymhp . ( 2 connectors ) take out all the stickers if you want. Less annoying ..
Press it with your thumb (HARD) to ensure that they are in place. You can hear the click sound if you switch off your “Room” fan. Once this is done , put the battery without replacing the rest of the parts . ( All connections connected ) .. Try to turn it ON. If it doesnt , try again . Again it doesn't turn on then try again. Keep on trying. I'm sure that you'll get it working. IF it does turn on , please post reply's.
NOTE : Make sure that you connected everything back ( Very IMP) . For those who cannot take the chip out , I recommend you to watch a youtube video on how to dissemble an HTC diamond.
ATB
I DON'T ACCEPT DONATIONS . SO AS A "THANK YOU" , YOU CAN FOLLOW ME ON TWITTER
Twitter
RE:
No reply's? nobody tried this out?
I wish to try but with no pics it is hard to guess what chip to search for...
Can you apload some pics to some fileshare or send me on e-mail: [email protected]
thnx a lot
@ above
I've sent you the pics. Check it out..
@ all
Please follow me on twitter to get your replies faster regarding the matter. I have 24x7 access to my twttr account
Thanks a lotttttttttt ~ !!!!
THANX TO TEAM XDA !
I was wondering what went wrong d day wen i rebooted my device.
I was screwed with an error message "microp error please update ur firmware"
googled a lot before ending up with team XDA.
came to know its a software problem, i cleared storage, updated a rom but nothing worked. finally i read xda instructions, i went to d nearest mobile store n explained everything. (since i dont have tools to disassemble my device at home) d service man did d job n i got my htc diamond working !
he just charged 100 rupees, htc service center wud have definitely asked much more than that !
thanks to xda ! but d lesson i learnt is "NEVER DROP/THROW UR HTC"
----------thank you----------
PANKAJ KADEL
kadels.info
@ above
Glad to help you man. This is a really irritating problem.
siddharthsai said:
Glad to help you man. This is a really irritating problem.
Click to expand...
Click to collapse
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
@ ja_zzz7
ja_zzz7 said:
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
Click to expand...
Click to collapse
Have you tried Hard reset? Hold down the volume key and press the reset key and power button . Backup your data using PIM backup before doing this... let me know if its coming again..waiting for your reply.
I have done the hard reset using the volume down/enter and reset button. I have reached the screen where I have to press on the cross hair and is stuck here as the touch panel is not able to click on the exact spot as it is always clicking to the bottom left. The same thing happened when I tried hard reset using "clear all data and format" but have to wait for a while until the screen can work.
After that the screen problem came back again. Any other suggestions?
Thanks.
@ above
Sorry for the late reply. had some work.
Is you battery low? just turn off your device and charge until its full . this happens mostly when you use duplicate charger . try charging with htc original charger ( borrow it from a frnd ) ...charge it fully and hard reset. Tell me if it works... by the way are you having an Indian version of diamond? ( 2G) ?
Let me know.
RE:
Flash it with a new ROM and if it still persists , then its a hardware prob. do you still have warranty ?
man you are the bomb. many thanks for this tutorial
@ above
Thanx buddy. its not just me , its everyone in XDA ...we all rock
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
ja_zzz7 said:
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
Click to expand...
Click to collapse
Thats good to hear... see ... if you try , you can..congrats.
I have a HTC Touch Pro 2 and I am getting the Microp error. The phone is not covered by warranty so looks like I may have to attempt to fix it myself.
I notice your tutorial deals with the Diamond - Any idea how to fix a Touch Pro 2?
@ above
Bro . Microp error comes because of the connectors. Since this is a slightly bulky , twice as big as diamond and has a slide out keypad , i suggest you to take it to a guy who knows to remove and fix things back.. ( not service center ) .. he'll charge you probably 200-300 bucks...just tell him to reassemble it back. Let me know...
Regards
HTC Touch HD microp error solved
I recently made an attempt to do the same to a Touch HD which showed the same Microp error and know what , its working... PM me for the tutorial
( cant post on the diamond forum )
Regards
I needed new screen, the easy part was taking apart but stuck on these 2 connectors well the bigger one, even when apart it does not seem to go together?
When I opened my mobile device and worked him and returned the maintenance of each piece place and locked the device and ran the device used, but it became clear that the keyboard does not work part of it did not light up Fn key
And also
Caps Lock key
And some buttons such as (I,k,m, del ,0 ,y,r,w,a,z,x,c,v,b,j)
but o, e f h space ) are working
Brothers please help me solve the problem as quickly as urgent and I will be grateful to you will repeat this message until the issue is resolvedالاستماع
sorry my lang not good
pls hlp
no body Answered
Where officials where geniuses where engineers a full day before you did not write any comment or solution to my problem give me a chart images to repair the device does not want to put it in the rubbish
I'll reply..
Your english makes it hard to really follow what you are saying or asking.
If the keyboard works perfectly before you took it apart and now it doesn't work, sounds like you broke it. Try taking it apart and putting it back together.
hello. first thing i want to apolgize my english.
to thread:
i got a new OP3T, about 1 month only. the phone was updated like needed to Android N and all been good. but about 2 weeks i got problem with the Touch buttons near the home key/Fingerprint (back and recent apps).
the phone didnt fall or something that can cause it, and i dont know why it happens.
i must say, after a little check, it happens when i connect to WiFi, i didnt get this problem when im on my Cellular network
please help me!
help
Does home action (tap on fingerprint sensor) still work?
I have also problems with the hardware buttons. Well possible that it is also only a problem when connected to a Wifi. I'll test it the next few days