all profisionals :proplem want to fix (important ) tytnii keyboard - Tilt, TyTN II, MDA Vario III General

When I opened my mobile device and worked him and returned the maintenance of each piece place and locked the device and ran the device used, but it became clear that the keyboard does not work part of it did not light up Fn key
And also
Caps Lock key
And some buttons such as (I,k,m, del ,0 ,y,r,w,a,z,x,c,v,b,j)
but o, e f h space ) are working
Brothers please help me solve the problem as quickly as urgent and I will be grateful to you will repeat this message until the issue is resolvedالاستماع
sorry my lang not good
pls hlp

no body Answered

Where officials where geniuses where engineers a full day before you did not write any comment or solution to my problem give me a chart images to repair the device does not want to put it in the rubbish

I'll reply..
Your english makes it hard to really follow what you are saying or asking.
If the keyboard works perfectly before you took it apart and now it doesn't work, sounds like you broke it. Try taking it apart and putting it back together.

Related

so i dropped my phone in a lake and this happened....HELP

it all works totally fine.....
EXCEPT the e and w keys on the keyboard don't work
i have an AT&T tilt and was hoping someone new how to reprogram the button functions
i want to take the w and e keys and swtich them with the "ok" and "tab" keys on the bottom of the keyboard....
just totally switch the two buttons so that i can use the @ and ? signs when i press the "Fn" key
i never end up using the tab or ok keys on the keyboard anyway
i was hoping to make cab i could install like the tilt keyboard fix cab
only thing is
i don't know how to reprogram the keys or make a cab
any help would be greatly appreciated please pm me
UPDATE i just looked at my keyboard and was thinking to switch the w with the start menu key and the e with the tab key
thanks guys
Good to hear that your device is still (mostly) working after beeing dropped into a lake.
What did you do afterwards, how did you dry the device?
best thing to do is lay it out on a towel and leave it alone near a draft for acouple of days. let it totally dry out. if that dont work then you got some cleaning to do.
drying out
good 2 here phone still works, im guessing, but it sounds like u may still have some water under those keys (tiny droplets). The best way of drying a wet phone (or any gadget)(disasembled?(taken apart!)) is to place in as sealed container (airtight) filled with rice. The science is the rice will naturally soak up all the moisure around it. I've never tested it first hand but sounds like it should work. I think leaving it for 3 days in the rice should make it work. Good luck
you can also take it apart and completely submerse each peice separately in a highly volatile solution(rubbing alcohol will work, but i used ethanol), take it out and scrub for about five minutes with a toothbrush in all possible directions and then air dry on a towel for two days, yes it is time consuming but i left a test phone in water for three days and tried this and the phone worked perfectly
Buy New Keyboard
Expensive option is to replace the keyboard. If you go on eBay and do a search for Tytn 2 Covers or something alone thouse lines there are a couple of sellers that sell replacement covers that have the keyboards build it, and on the wiki page there are a couple of links to disasembly guides. Think replacements where around £50uk - Expensive and fiddly maybe, but your'll have a mark free case and fully working keyboard.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160244005122
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360055816270
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250253843809
Rice is the best option I always recommend this. It has worked for me many times
thanks guys.....i actually dropped it in the lake about a month or so ago, i just finally got around to posting about my non working keyboard....i ended up taking it apart and letting it dry on my window sill in the sun for a full day and a half or so....
you really think there is still some water under the keyboard after a whole month....the e and w keys are the only things not working i just figured that something fried that spot on the circuit board or something along those lines....
does anyone know how to reprogram the keys on the keyboard? is it some registry setting? all i really need to do is switch some keys functions
perhaps ill try the rice thing tonight thanks guys
You may want to PM TaurusBullba or __Alex__ and ask them for help. I know that TaurusBullba posted the Tilt Keyboard Fix for HTC Roms (Remapping the hardware keys to the correct letters). Also, IIRC, __Alex__ posted the fix for TyTN II's using AT&T Roms.
Actually, if you search for their posts, they may mention how they did it.
so here's a going to bed and hoping when i wake up someone has helped me fix this bump....
im gonna go get some rice tomorrow after work
ill PM bulba and alex then as well
thanks everyone whos given advice....i really appreciate it
ill definitely post my results to help any future "phone in lake droppers"
~j
AEKmap will let you remap the keyboard keys. I was using it with my Hermes to account for different phone/ROM difference. I don't remember 100% if it will let you remap the special keys too, but I think so.
Very nice to hear our phone can survive a full dunk. Mine fell out of my belt clip case while walking. I tried to catch it with my foot and to my horror, ended up drop-kicking it 10' end over end in a dirt/gravel parking lot. Picked it up, blew the dust off, put the battery cover back on, and it fired right up. I thought for sure it was a goner.
My hat is off to the HTC team for building a $500 device that can take abuse.
PQZII is another option for remapping the keys.
KMFM$ said:
You may want to PM TaurusBullba or __Alex__ and ask them for help. I know that TaurusBullba posted the Tilt Keyboard Fix for HTC Roms (Remapping the hardware keys to the correct letters). Also, IIRC, __Alex__ posted the fix for TyTN II's using AT&T Roms.
Actually, if you search for their posts, they may mention how they did it.
Click to expand...
Click to collapse
What TaurusBulba and I did is just take the keyboard layout registry entries from a ROM (AT&T for TaurusBulba, HTC for me) and dump it to a cab, so AT&T users can use HTC ROMs and vice versa.
I do seem to remember yet another thread which tells you how to actually map keys and it may be linked in the wiki.
Hope this helps!
Most likely your problem is coming from "dirt/minerals/gunk" that dried on either the PCB or under the keys. Dunking it in a high volatile solution and swishing it around, or similar, may help. Obviously remove the battery!
O_O
your phone can swimm..
thats cool...
always wanna know . . . . . . . . . . does it float?
LOL . . . .dropped my old siemens M65 off the boat, it worked for 30 mins on 5m depth, but never found it back . . .

Some keys not responsive

I have been using my Xperia X1 for couple of months and since I'm a heavy user of the slide-out keyboard (for Internet, SMS, e-mails etc), I noticed that some of the keys especially on the lower side, such as the Fn (blue) C, V, N, spacebar and dot (.) keys are not as responsive as other keys. I need some extra "push" on the affected keys compared to other keys. This is irritating since the letters would be "skipped" if I type fast and I always need to backspace and correct it.
I suspect it might be due to some mechanical issues on the keys and not related to the phone's software, is there a way I can fix this? Shall I bring it to the service centre since it's still under warranty?
Thanks in advance.
im starting to experience this thing too. For some reason the spacebar button needed to be press harder. ITs quite irritating because i dont like to prees button that hard when im typing
I am also experiencing a similar issue, mainly the 'v' key that irritates me, it will either not respond or be like 'vvv' when I press it.. I presume this is a hardware issue?
im thinking about getting it back to shop for a repair. But that'll take a while or so to fix the keyboard etc.
And yes, i think it is a hardware issue.
Looks like the same problem
I can't realise that I have to press harder, but the issue with the lost or double letter seems the same it's the 'n' and 'm' in my case... very annnoyinnng
below is my post:
http://forum.xda-developers.com/showthread.php?t=495897
So, if it's hardware, means they fix it and after two month it starts again on heavy users???
i have the same problem too. my friend(use to work at SE service center ) suggest i go down and change the keyboard. as long and it's under warranty it's free.
my space button on the 'right' side needs extra effort. while on the 'left' side it's fine, but i'm use to using my right thumb to press space. and my fullstop button too.
my space is kapo!
Yes, my left space bar is less responsive as well and it can be quite irritating sometimes...
random multiple letters
Meh, I seem to be getting keyboard issues with mine too. Example:
o, p, l, a, i, f all seem to repeat 3 times, n gives an n and a space at the same time, m gives m and :, e repeats twice... Much annoyance, as I am usually meticulous with my spelling on emails and sms - none of this text speak crap. I have to re-read my messages before sending them now!
Anyone had any experience sending them off to K&N in the UK?
I'm proper miffed that Sony's "Next day replacement" thing only works if you are out of the country from which your device was purchased.
/rant!
Some of us picked this phone OVER the HD because of the keyboard. At the time I bought this phone, the THD is cheaper than the X1.
And guess what happens? The main defining feature of this phone messes up. We did not buy a cheap phone, or at least back then. It is stupid.
Having to press the space bar harder than other keys is lame. You can't type with confidence, having to correct the errors again and again. You can also choose to press extra hard on either the keyboard, which use alot of concentration, or press equally hard on all keys, which tires your hands out.
I can't even compose a email without my hands and mind hurting, or having missing keypresses. Miss those days, only 2 months back when I can type like a champ. Kudos to Vodaphone for discontinuing phone. Potential buyers should wait for TP2
Many face the same problem...
I think it's worth to complain officially and refer to this thread... I saw someone else opend another one... Anyway, with both threads there are a lot of users already. BTW, mine is getting worse, it's like a virus and infecting the other keys, slowly but steady. I go to a SE shop tomorrow...
AND YES, I ALSO PURCHASED IT MAINLY BECAUSE OF THE KEYBOARD...
is "au:" button workable??cos i press mine,it dint show anything..i remember it used to show something on the screen..and "n" annoy me the most,usually come out nnn when i press it..sad i only having it for 3 months..
okay i also got this problem... kinda funny 2 explain.. so looks i'm not the only 1.. but since obviously only we few have this problem (an here http://indrapr.blogspot.com/2009/03/annoying-sony-ericsson-xperia-x1s.html) it might really b hardware related...? anybody sent it in ?
pls XDA experts... could this b somehow software related?
dont think so coz i'm hard resetin and flashin the whole time and always have the same issue...
this problem really makes a huge part of the X1... useless..
plssss help...
superweijie said:
Potential buyers should wait for TP2
Click to expand...
Click to collapse
Yeah, sure, buying another 500 € device which is produced by HTC. HTC is not capable of producing quality. All my HTC phones (Magician, Hermes and X1 - which is produced by HTC) had heavy quality issues. It's damn chinese (no) quality control, sorry for being politically incorrect, but that's the impression I get with many products these days.
My hope was that Sony Ericsson would check the quality of HTC better than themselves but I guess I was wrong. Even though the housing is quite solid, the coat peels off by nothing more than putting it into the pocket. And now, half a year after I have bought it for 500 €, the keyboard, which has been lousy since day one, starts to get even worse, making the X1 a ripoff. I think I will send the device in, also because of the coat peeling. I can, here in germany, exchange the device three times until they have to give me my money back - I really hope this will happen.
this has just started happening to me down one side of my keyboard (the right-hand side).
does this only seem to be happening to the right-hand side of the keyboard ?
is this happening to anyone with the standard rom ?
mine is exactly the opposite. The space bar from the right hand side is too sensitive lately, when i press it is adding three or even four spaces at a time!
Sony Ericson service know this problem as well.Like they also know crack in case problem.As i explain in 'do you regret' thread they know all this problem but they dont do anything to fix.Shame on them.You have to book your phone 3 times.Afterwards they ll give you new unit.That is it.Cheers
just read your blog post, (mr creator of the thread) and it describes exactly my situation, even they sucession in which keys started having issues.
anyways, your lucky you could fix it. I couldnt even if i wanted cuz i bought it in USA from a store that sold vodafone unlocked X1s and brought it to Latin America, so im basically screwed :S
im thinkin of opene it myself and clean it or something, but if guysand SE service had to replace it, i guess that wont help much :S
I have the same problem, with button 'a'. I just need to press it harder than the other buttons. That is very very annoying, to have BK issue with device, bought because of it. And ofcourse I have the "crack" issue, and I used a glue to stop the crack from spreading out.
Such quality issues are very annoying when you buy a 500 Euro smartphone.
So I either remove the glue (I hope SE won't make a problem of that) and return it to SE for KB replacement, or clean the keyboard by myself (there is a tutorial for that, but it doesn't look very easy). But ofcourse I have to wait until the 'a' button stops working completely and than wait for SE to do something about it.
I have a question about the SE service: do you think that they will refuse to take care of the phone because I used a glue for the crack on my X1? Could that be an excuse for them to refuse my warranty?
lol...this is just ridiculous...i got the same problem, but i thought to be too stupid to hit the keys correctly. on my device the "broken" keys are m,n,dot, right space bar...
going to send it in for repair...
first had this cracked case problem and now this one...

My qwerty fails, can any1 help please?

Hey! It seems my qwerty works bad... when i write any sms, or notes.. or sthing that i write with this keyboard.
When i just write (for example) Hey, whats up? Im fine, thanks
it randomdly duplicates some letters and eats some spaces, so the note seems like:
Heyy, whatsup? IIm fine,thannks
does any1 know why?? please im desesperated... i need help
thank you very much!
UnD said:
Hey! It seems my qwerty works bad... when i write any sms, or notes.. or sthing that i write with this keyboard.
When i just write (for example) Hey, whats up? Im fine, thanks
it randomdly duplicates some letters and eats some spaces, so the note seems like:
Heyy, whatsup? IIm fine,thannks
does any1 know why?? please im desesperated... i need help
thank you very much!
Click to expand...
Click to collapse
this is sometimes an issue when your inbox/sent messages get full.
you can clear them out or reflash the rom.
I've heard of a lot of people sending their phone in for repair for this issue but try clearing them out/or re-flashing because I'm 99% positive its a software not hardware issue.
Sorry But reflash with original Rom, and Empty box wont help I have the same. Maby is some driver? I clean my keyboard with vacuumcleaner, but the same happen, dubles or triples letters, or eating letters or spaces.
Well, all my inbox from sms, email, etc. are empty
i hard reseted 3 times right now...
seems ill have to send it to repair (for second time now.. ive used my xperia only 1month from 2 haha, lets wait another 1 ^^...)
if any1 knows another way to solve this.. i got until monday to send it to repair !!! would be very thankful !
thank you very much !
zygiboos said:
Sorry But reflash with original Rom, and Empty box wont help I have the same. Maby is some driver? I clean my keyboard with vacuumcleaner, but the same happen, dubles or triples letters, or eating letters or spaces.
Click to expand...
Click to collapse
if the keyboard were to degrade it would happen below the keys. and the keyboard is one solid piece.
and it isn't a driver issue.
I've had this issue on every single wmo device I've ever owned so try clearing, or re-flashing your rom again before you consider sending it in for repair.
UnD said:
Well, all my inbox from sms, email, etc. are empty
i hard reseted 3 times right now...
seems ill have to send it to repair (for second time now.. ive used my xperia only 1month from 2 haha, lets wait another 1 ^^...)
if any1 knows another way to solve this.. i got until monday to send it to repair !!! would be very thankful !
thank you very much !
Click to expand...
Click to collapse
you hard reset? or soft reset 3 times?
hard reseted, the one that clears all the device. pressing those 2 buttons down the screen, plus the "on" button ^^ yes yes i mean hard reset hehe
i dont know how to flash a rom :'( and i cleared it with a program, which i downloaded from a website hehe
UnD said:
hard reseted, the one that clears all the device. pressing those 2 buttons down the screen, plus the "on" button ^^ yes yes i mean hard reset hehe
i dont know how to flash a rom :'( and i cleared it with a program, which i downloaded from a website hehe
Click to expand...
Click to collapse
haha you'd be surprised how many people confuse the two.
well I would definitely try flashing it *hint*(the sticky's are full of useful information).
If not, call up SE and set up the repair.
Ok, im just trying to flash now, ill post another time when it finishes with the result
thank you!!!
i dont know if it could be, but it seems like having the same bug, but with less % of appearing, i mean, lesser letters appear duplicated, and lesser words and spaces appear bugged too
but anyway they continue appearing... so i really dont know what happen... :'(...
more ideas?
I have the same issue. I think it's becouse of dust between letters on the keyboard Im thinking about opening device and cleaning keyboard becouse my x1 is not on warranty. But before that I want to try to clean it with compressed air in spray. It is a good cleaner for electronics so may can help but before use that remember about turning off device and taking out battery.
ell82 said:
I have the same issue. I think it's becouse of dust between letters on the keyboard Im thinking about opening device and cleaning keyboard becouse my x1 is not on warranty. But before that I want to try to clean it with compressed air in spray. It is a good cleaner for electronics so may can help but before use that remember about turning off device and taking out battery.
Click to expand...
Click to collapse
that's impossible.. the keyboard is like a film its one solid piece, so any dust going between letters goes no where. the only possible things are.. either condensation got stuck between the keyboard and the responsive layer below it.. that layer below it has started to break down and degrade.. or its a software issue.
how is your x1 not under warranty?
UnD, if you tried reflashing then you just have to call up SE for a repair because its a hardware issue then.
I have the same, after flashing less, but still problems. No mater is original or Fun's Rom
I had quite similar problem - space button didnt work correctly very offen and then all keys around space stoped working correctly - doubling the letters, sometimes not working at all etc.
I had it repaired in service - covered by warranty. They changed whole keyboard.
I'm having the same problem... very frustrating getting triple full stops or two 'o' letters in 'of'.
got two cracks in the case. What are the chances of a replacement do you think? still under 1 year warranty.
i have the same issue.
its caused by dirt/dust etc under the keyboard.
the only way to fix it is to take the handset apart.
best bet is to phone sony and get it repaired
I have the same issue and was wondering if it was a problem caused by:
Dust under the keys
Misalignment of the keys
Will try a hard reset and see if that helps.
I have the same issue. Tried multiple roms and stock roms and clearing the whole phone and its still the same issue. Im sending it back for repair. Warrany is 2 years =P
ive been re-flashing my ROM twice so far... empty my inbox as well, but doesnt seem to fix it, but ill try another flash again x_x
Even the Fn Button (Blue Square at corner left down) wasnt responding if i didnt press it hard enough
just cleared sms/mms now works great again
but i still will write with fingerkeyboard until i get the iphone
xperia is good but keyboard sux (should not happend) and WM is far away from the iPhone OS
also apps are better for iphone

QWERTY keys not working

Great website here, hopefully you guys can help me as I've searched over the net and haven't had any success. Basically the delete and P button on the QWERTY keyboard have stopped working....which is really very irritating Very occasionally they start to work again when I reset the phone, but less so nowadays.
This sounds like a hardware fault to me, but before I took it back to the store to get it replaced, I wanted to check if there's a way to fix it incase it's a software problem. Any help? Thanks!
I used a dry contact cleaner and compress air without open the phone..
It works for me!

HTC diamond screen problem solved!(Microp error) [ Assistance Cont. by Request ]

Note : Hi, due to work overload i cannot be active on xda. If you want personal assistance regarding this problem, you can get in touch with me via twitter
www.twitter.com/SiddharthSaiG
Click to expand...
Click to collapse
Before you proceed, please note that I cannot be accountable/liable for any damage caused to your phone. This is only a guide!*
THIS TUTORIAL IS ONLY FOR HTC TOUCH DIAMOND - NOT FOR DIAMOND2 / TOUCH PRO / HD2 ( This is simply because i don't have these devices with me and that i haven't tested! Those who have a spare handset are welcome to send it to me for diagnosis )
Let me get straight to the point. I’ve found out the solution to all the screen blackouts or the famous “microp error”. I’m sure no HTC so called Technical department could solve this.
I’ve been sitting 40Hrs straight with my HTC Diamond. ( The worst part is removing the screw’s and putting them back.)
THE PROBLEM –
1.It’s a hardware problem. Upgrading the microp.dll will not solve anything. ( Microchips gives really wired errors)
2.SYMPTOMS : A dialogue box showing “ Microp version 0 , Upgrade firmware “ (as far as I can remember) , dim or no backlight , no charging indicator , No backlight for physical keys , no touch sense (D button) , soft reset button non responsive..
3.EARLY WARNINGS: (a). If u have dropped your HTC diamond , then there is an 87% chance of this happening. (b.) Exposure to extreme cold/heat. ( if it’s a heat issue then u might need to replace the motherboard.)
THE SOLUTION
I don’t have a cam to record the entire event. But there is a YouTube video of an HTC dissembling. I’ve downloaded the video and put captions in it so that it would be clearer. Video will be uploaded soon.
Diamond de-assembling video - http://bit.ly/bxtcw0 (some Chinese guy , thanks dude)
PROCEDURE
When you remove the back cover , you’ll see
1.The battery
2.Sim card holder
3.Tons of screw’s
Remove all the visible screw’s.Remember , your warranty will get void if you have one!! This tutorial is for ones without warranty. Take a look at this picture :
http://www.twitpic.com/1cymw5
Remove the screw's shown above..
Next Locate the below chip.
www.twitpic.com/1cynw4
This chip is the main cause for the screen problem. This chip wen taken out has 2 connectors beneath it . These connectors wen gone loose causes the screen problem. It will take a few hours to just get them in place. ( HTC need to improve in build design)
www.twitpic.com/1cymhp . ( 2 connectors ) take out all the stickers if you want. Less annoying ..
Press it with your thumb (HARD) to ensure that they are in place. You can hear the click sound if you switch off your “Room” fan. Once this is done , put the battery without replacing the rest of the parts . ( All connections connected ) .. Try to turn it ON. If it doesnt , try again . Again it doesn't turn on then try again. Keep on trying. I'm sure that you'll get it working. IF it does turn on , please post reply's.
NOTE : Make sure that you connected everything back ( Very IMP) . For those who cannot take the chip out , I recommend you to watch a youtube video on how to dissemble an HTC diamond.
ATB
I DON'T ACCEPT DONATIONS . SO AS A "THANK YOU" , YOU CAN FOLLOW ME ON TWITTER
Twitter
RE:
No reply's? nobody tried this out?
I wish to try but with no pics it is hard to guess what chip to search for...
Can you apload some pics to some fileshare or send me on e-mail: [email protected]
thnx a lot
@ above
I've sent you the pics. Check it out..
@ all
Please follow me on twitter to get your replies faster regarding the matter. I have 24x7 access to my twttr account
Thanks a lotttttttttt ~ !!!!
THANX TO TEAM XDA !
I was wondering what went wrong d day wen i rebooted my device.
I was screwed with an error message "microp error please update ur firmware"
googled a lot before ending up with team XDA.
came to know its a software problem, i cleared storage, updated a rom but nothing worked. finally i read xda instructions, i went to d nearest mobile store n explained everything. (since i dont have tools to disassemble my device at home) d service man did d job n i got my htc diamond working !
he just charged 100 rupees, htc service center wud have definitely asked much more than that !
thanks to xda ! but d lesson i learnt is "NEVER DROP/THROW UR HTC"
----------thank you----------
PANKAJ KADEL
kadels.info
@ above
Glad to help you man. This is a really irritating problem.
siddharthsai said:
Glad to help you man. This is a really irritating problem.
Click to expand...
Click to collapse
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
@ ja_zzz7
ja_zzz7 said:
Hi Siddharthsai,
I have a screen problem but a bit more unique. The touch screen can work for a while if I leave it alone but after using the phone for a while, the screen does not work. If I were walk around with the phone, the screen will not work.
The buttons all can work and the phone can function for programs that can be controlled by the buttons. I am wondering if the problem is the same as yours in terms of connection problem.
Appreciate your advise on this.
Thanks.
CH
Click to expand...
Click to collapse
Have you tried Hard reset? Hold down the volume key and press the reset key and power button . Backup your data using PIM backup before doing this... let me know if its coming again..waiting for your reply.
I have done the hard reset using the volume down/enter and reset button. I have reached the screen where I have to press on the cross hair and is stuck here as the touch panel is not able to click on the exact spot as it is always clicking to the bottom left. The same thing happened when I tried hard reset using "clear all data and format" but have to wait for a while until the screen can work.
After that the screen problem came back again. Any other suggestions?
Thanks.
@ above
Sorry for the late reply. had some work.
Is you battery low? just turn off your device and charge until its full . this happens mostly when you use duplicate charger . try charging with htc original charger ( borrow it from a frnd ) ...charge it fully and hard reset. Tell me if it works... by the way are you having an Indian version of diamond? ( 2G) ?
Let me know.
RE:
Flash it with a new ROM and if it still persists , then its a hardware prob. do you still have warranty ?
man you are the bomb. many thanks for this tutorial
@ above
Thanx buddy. its not just me , its everyone in XDA ...we all rock
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
ja_zzz7 said:
Guess what! My problem is solved. Did a hard reset yesterday but was stuck at the cross hair allignment as the screen was not responding. Left the phone overnight and could complete the allignment the next morning. After rebooting, the touch screen was jammed again.
Try flicking the screen with my finger a few times and managed to move from page to page and after flicking many times, the touch screen recovered and has been OK for the past 10 hours.
Guess one of the solutions for those who have intermittent problem is to flick your screen top and bottom. Guess the pressure must have connected any loose joints. I am a happy guy today )
Click to expand...
Click to collapse
Thats good to hear... see ... if you try , you can..congrats.
I have a HTC Touch Pro 2 and I am getting the Microp error. The phone is not covered by warranty so looks like I may have to attempt to fix it myself.
I notice your tutorial deals with the Diamond - Any idea how to fix a Touch Pro 2?
@ above
Bro . Microp error comes because of the connectors. Since this is a slightly bulky , twice as big as diamond and has a slide out keypad , i suggest you to take it to a guy who knows to remove and fix things back.. ( not service center ) .. he'll charge you probably 200-300 bucks...just tell him to reassemble it back. Let me know...
Regards
HTC Touch HD microp error solved
I recently made an attempt to do the same to a Touch HD which showed the same Microp error and know what , its working... PM me for the tutorial
( cant post on the diamond forum )
Regards
I needed new screen, the easy part was taking apart but stuck on these 2 connectors well the bigger one, even when apart it does not seem to go together?

Categories

Resources