some advise please from 6.1 to 6.5 - Tilt, TyTN II, MDA Vario III General

i updated my rom on my kaiser today i was using stylez which is 6.1 build and i tried a few of them that are 6.5 build the only thing is that every thing seems to be ok apart from i cant get any sound or vibration from my phone when i get a new text message i have checked in the sound settings menu and i have made sure the play sound and vibrate is checked under the new text message tab but it doesnt do anything at all when i get a text. It does ring and vibrate when i get an incomming call but nothing when i get a text i have tried several 6.5 build roms now and all the same result so i am sure it is something i am doing or have done wrong.
i have tried diffreent radios but still same i didnt have any problems when i used the styles 6.1 build.
All i did to update the rom was to download the 6.5 rom and flash it to my handset direct from the computer, is there something else i should have done or should do or does anybody know what i can try to solve this problem
thanks

Try another SPL or another Rom.
What SPL are you using?
What Rom?
What Radio?

i have HardSPL 3.29
i have tried PHX 3.1.21815 with widgets and 23053_titanium_ultimate roms
i have KAIS_Radinly_1.70.19.09
what other spl or radio should i try to get the sound and vibration to work on the roms i have tried because i really like the PHX 3.1.21815 with widgets rom
thanks

Unfortunately there isn't a simple answer...you have to try different radios...for example a lot of people are happy with 1.71.09.01.
For SPL generally your works good in a lot of combination...you can try also 3.56

You might also ask the question in the thread pertaining to the rom. If you mean TPC's ultimate rom, some of his rom's require S2U2 to get the vibrate on ring to work, some don't. His rom's also like SPL 3.34. Also, did you flash stock rom first? Good luck.

i didnt flash stock rom because i dont know where to get stock rom for 6.5 to flash first any help on that one thanks

dazzlet said:
i didnt flash stock rom because i dont know where to get stock rom for 6.5 to flash first any help on that one thanks
Click to expand...
Click to collapse
There is no stock 6.5 rom.

Related

Diamond very VERY unresponsive+other probs.

Hey there, please don't kill me for asking this question. I have searched this forum, and googled my problems, and tried all the suggestions...none work.
I have an htc touch diamond with a wm 6.1, but have flashed MANY different roms in the past 2weeks, including wm6.5 roms. All roms have been downlaoded from XDA.
Hardspl: Olinex 1.30
Radio: Radio v1.00.25.23
My problems...
First my phone started becoming very unresponsive, taking ages to even go into the start menu. I assumed it was the rom that was causing the major slow down, and flashed another...same problem. Then thought okay, maybe its just wm6.5 thats not very stable yet...and flashed a winmo6.1 rom.
It works fine now, but everytime i soft reset it does a hard reset, reinstall's all the wm6.1 cab's, delete's my contacts, messages, email's etc...please, i don't know what to do. My whole life is organized on my phone...i can't keep losing data like this everytime i soft reset.
Thanks in advance...
And thanks for the amazing community and to all contributers!!! you are all doing an amazing job!!!
must have had a bad flash, theres a topic somewhere on how to solve the weird problem
ROM issue....
Try reflashing with an original stock ROM, then flash the ROM you want to use... this cures all sorts of wierd and wonderful issues
Yipee!!
Thank you all, flashing stock rom and then the cooked one worked like a charm. Thanx All!!!
stock ROM
Where did you get the stock ROM? I have a friend that needs a stock ROM that preceded the last ROM update HTC released. He states he has v 6.1 build 20764.1.4.3.
Stock rom
http://forum.xda-developers.com/showthread.php?t=394985

Touch HD running slow, need advice

Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
stuartturrell said:
Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
Click to expand...
Click to collapse
have you tried flashing back to stock http://forum.xda-developers.com/showthread.php?t=501583&highlight=RUU+blackstone rom?
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
stuartturrell said:
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
Click to expand...
Click to collapse
i am well experience with USPL but nil with HSPL, i have been flashing back and forth stock and any latest Manila 2.5xxxx ROMs using USPL. you can search HSPL thread and look for ways in order for you to flash stock rom and reflash cooked roms.
It sounds like you've correct SPL for rom your using, i.e. SPL 1.56.Olinex, so it shouldn't be a problem with HSPL. You've also tried a different rom which also didn't fix your issue so I'd suggest what jigners said above and restore stock SPL & rom, then re-use dummies guide before flashing cooked rom again.
Alternatively check on Miri thread incase there are issues with his latest rom(s)? If so, there are plenty of other chef's and alternative cooked roms to try before you try restoring stock
maybe you want to try kwbr's Topix rom, it's wm6.1 and fast
I would say go back to stock ROM and start all over again.
Good combo is:
SPL 1.56
EnergyROM
Latest radio is a bit disappointing for me so i am on 1.14.25.24 with its rilphone.dll
Remember to flash with no memory card inside and to do a hard reset after the flash
By the way, have you hard reseted your device after flashing a new rom?
If not then do the hard reset for 2/3 times and observe the performance.
Furthermore, remove the SD card from the device and check the same. Defective SD card simulates the same problem because system requires lot more time to access it.
OK, i have gone back to stock firmware (well most recent offical release anyway)
All seems ok at the moment, it's been up and running for a couple days smoothly now.
I will take a look at the dummies guide and get back to cooked soon.
And yes, i do a hard reset everytime i have flashed, but only, i will try that next time i put cooked ware on the phone. (hopefully later today).
thanks for all the help,

Help!My Blackstone fails to accept a WM6.5 rom, as it used to the past!

Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!
I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.
gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?

Tmobile MDA Vario 3 no Ringtones... help!

Hello!
I have a Tmobile MDA Vario 3 and the following problem:
I used my phone normally every day, and one day no ringtones are working... I can hear them choose one of the sounds, but no sound if somebody rings me...
what can it be? I dont wanna make a hardreset, because many programs on it and i dont wanna lose them...
I did a hardreset and used before sprite backup, i tested the ringtone and IT WORKS, now i put back my backup and no ringtones working now again, how can i find the mistake in the system? Can i look into the registry like normal windows too?
in another forum i saw someone means it can be the divx player, i deinstalled it, but nothings better...
I NEED HELP... what can i do?
Regards
Can't you just put the programs back on there? It's really not that hard.
ChumleyEX said:
Can't you just put the programs back on there? It's really not that hard.
Click to expand...
Click to collapse
Its too much for me...
Its an tmobile device and i putted manually the o2 internet settings in there nobody knows whats the defect on there?
Regards
I could flash and setup my Tilt in no time flat.
Ok, i will do a hardreset, but is there a ROM for the Vario 3 so that i have an original HTC ROM?
And can i flash the phone then to WM 6.5?
Do you have any links for me?
are you on a flashed non OEM rom?
I am on an original tmobile rom, and i i have to reset i wanna change to another rom like windows mobile 6.5, i have to change rom to a htc rom 6.1 and then i have to go to 6.5 right? i wanna put away tmobile settings on hardreset!
Well if you hard reset it will put the oem rom on it. Then you follow the instructions to be able to flash roms on it. Until you flash a rom on it, every time you hard reset it the factory rom will install.
Can you give me a link where i find a description what to do for this?
I wanna flash the rom to HTC WM 6.1 original, and after this i wanna install 6.5 is this the right way??
[Resources] Flashing Your First Kaiser Rom (For Noobs)
No need for interim flashes after hard-spl you can flash a 6.5 make sure you read about Radio update
Maybe you have installed some softwares. let check recent installed softs and uninstall them, then restart. No need to use other rom if you like it
If it still does not work, do hard-reset.
Goodluck

Alright i give up!

Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom

Categories

Resources