I tried to install a different radio and it just stopped my phone and now my phone is in a screen where it shows a box and arrows pointing into a phone!? What is this I need to get my phone working again!! No buttons work, i tried to take out my battery and it keeps coming back! PLEASE HELP
and I cant get into the recovery screen either!!
please help me im so desperate!!
What radio did you flash? Your sig says you are running a hero rom, the danger SPL requires the new radio, if you flashed an older radio under the danger SPL you bricked your phone and there is no hope for repair.
Related
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?
i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore
can somebody help me I just wanna know how i set back to standard rom or what you call it
the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers
yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..
i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading
Has this been resolved? Or do you still require help?
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip
k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?
it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S
..........
Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom
Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks
DominicGood said:
Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom
Click to expand...
Click to collapse
DominicGood said:
Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks
Click to expand...
Click to collapse
You say you are trying to install HSPL 1.15, I presume you mean SPL 1.15? The behaviour you describe about the blue/green screen indicates that you have the wrong SPL. What version is your stock ROM, because if USPL 1.54 runs fine with your device, perhaps your stock SPL is also higher than 1.15. I suggest that you try a few other SPL's, most likely to be 1.54. You can download this here
Plenty of threads already exist about returning to stock for warranty, as well as advice in wiki and bottom of first post in HSPL thread.
Future correspondence should be directed into that thread.
Thread closed
Im using Rogers HTC Dream
I flashed the ADP1 Radio 2.22.19.16i from the Developer HTC website
My SPL is 1.33.0010
Then when i reboot the phone it stuck @splash screen showing "ROGERS"
And i cannot go to the SPL Screen or Recovery?
Is it broken? I only know if flash the SPL will break the phone, so the radio does?
Can you reboot by holding Green + Red + Menu? If you remove and put the battery back in, and hold Camera + Power, does anything come up? Can take a few seconds...
If anything comes up, things can be fixed and you should be fine.
No...
It doesnt work to me...
Cannot reboot use Call+MENU+Hang
Real Brick?!
well if you cant get in recover or anything sounds like it is.hold home plus power to see if it will go in recovery or not if you can get it there it's not bricked but if not thn yep it's bricked.if so call rodgers or who ever your service provider is and go that route .just say it's mess up .
this is really messed up because i started with same rogers htc dream as you and first tried to flash spl and got a brick. you tried radio first and got a brick. what are we supposed to do? can radio and spl be flashed at the same time?
this brick is caused by flashing the wrong radio on the wrong phone...... radios are just capable of bricking phones as the SPL.....
also, the radio may be incompatible with your spl
not sure 100% its a brick, maybe there is a solution. but im 90% sure its bricked if you cant access anything. try letting it sit on tht screen for a few minutes, it may take time to update
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
go to olinex hard spl section and write about your problem maby they can help u
Onlinex hard spl section?
I must be blind. Where is that?
matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here
matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.
Tried both checked and unchecked and dont work
I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS
Great!!! I will remember that one too.
Hello,
i had android 1.6 on my g1 i tried to upgrade to 2.2 and i bricked it then i went to fix it by JTAG. then i am trying different ways to install roms but it never does.
sometimes it makes loop of restart
sometimes i install the radio and spl exactly as a post here says but at the end it says that setup cannot verify the update package!!!!
now i have r7 on my phone so can any one please to give me exact steps to do with exact files to install at least android 2.2 ? because i tried so hard follow many posts but it never work.
thank you for your help guys
Are you sure you have a non stock spl and radio. Most roms won't install if the spl isn't changed. I think it has to do with the size of the roms. The stock spl will only load up to 44 mb. (Or something like that) the new spl changes the partition to 90 (or somethin....)
I am sure most froyo roms are larger than the stock spl will allow. I would start by checkin what it says in your bootloader screen. With phone off hold the power and camera button and it should take you to the bootloader screen. Get your hboot and spl number and see if it is the danger spl or stock.
Sent from my HTC Dream using XDA App
Did you root your G1 already?
go here http://forum.xda-developers.com/showthread.php?t=1098899 update your device to latest and greatest!! lol