Related
Hi All, (sorry for my language)
I can not upgrade or use my Trinity. Device freezing while booting-up. And Red NO GSM message appears on the bottom line. When blue Windows Mobile splash screen comings up, device freezing.
I'm trying to re-flash with SD card method (extract nbh file and rename to TRINING.nbh and put to te SD card and start manual bootloader) NOT ALLOW message appears on the upper line.
My device SPL version is 1.05. How can i rescue my trinity?
Thanks in advance...
seem u upgrade wrong version...try flash with original OS ROM, or else return to "them" to repair....
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
@stepw,
Thank you stepw. Problem is "how to compile splxploit" I'm using Windows XP OS on my notebook.
RUU_signed.nbh extracted and waiting for next steps.
What is the next steps, who can explain to me.
Thanks in advance
ya, i try mingw to compiler but doesn't work. or it say error somewhere on file splxploit.c......Just wait for new answer. I brick my dopod810...and i'm waiting for your answer....
tuannghia1985 said:
ya, i try mingw to compiler but doesn't work. or it say error somewhere on file splxploit.c......Just wait for new answer. I brick my dopod810...and i'm waiting for your answer....
Click to expand...
Click to collapse
The issue was resolved for tuannghia1985 in the other thread
I am trying to use the splxploit, but am not at all familiar with Linux. Could do with a few pointers ....
I am using a Live CD of Knoppix on my windows PC. It appears to run very well, and seems to have gcc installed already as default.
What I did was unzip the splxploit.c file to the desktop and then went to the run command and typed "gcc splxploit.c -o splxploit" a console popped up, but gave a message saying gcc : couldn't find file or directory". I tried various combinations e.g "gcc home/knoppix/Desktop splxploit.c -o splxploit" but just couldn't get it to work. I think I am just telling the gcc program to look in the wrong place.
ANy help would be appreciated !!
gaz
I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts
Hello
I have developed a tool to rotate the screen and emulate a joystick using the accelerometer.
Everything here:
"webs.ono.com/shift/"
ATTENTION:
Only tested on XP
Regards
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
GSensoR in Windows 7
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
unapproachable2kx said:
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
Click to expand...
Click to collapse
server down,Sorry, try again
poltep said:
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
Click to expand...
Click to collapse
you must install it in xp compatibility mode
please read this:
"foro.todopocketpc.com/showthread.php?p=1536186"
regards
Ok tested so far so good joystick is working!
I also have irotate (winxp) video is rotating as yours!
Does it is supported under Win7 too?
Definitly recommended to all shift users!
thank you!
I can't install "GSensorR" on win 7 home premium
I'll give you my feedback everything works good but Gsensor is craching every time I resume from hibernation.
And I cannot make it run on windows 7.
Regards
Thanks for this excellent app! It's running fine on my Windows 7 installation, I just set it to XP compatibility mode during the installation process.
I got it working with WinUAE (Amiga Emulator) aswell
I cant make it run in windows 7 can you describe every step you did?
unapproachable2kx said:
I cant make it run in windows 7 can you describe every step you did?
Click to expand...
Click to collapse
I just used Google Translate to translate the guide into english and followed it to the point:
http://tinyurl.com/32ctocu and http://tinyurl.com/2v9o455
I set all three files to XP compatibility mode before running them though.
Let me know how it works out for you
Ok it works! Thanks pptan and khals! One question: how can I rotate screen in windows 7? Is it impossible?
Rotation for ours Intel GMA is disabled in windows 7 env. , I still need to understand if this lock is on drivers or Windows 7 registry.
Once unlocked it will work same as XP.
If some other is trying this please let us know here about some progress.
My actual test driver is 8.14.10.1930 on win7 ultimate
Does it work for Vista?
is there any way to run Gsensor.exe with rotation enabled first not joystick?
g-sensor & vista
Sheepster said:
Does it work for Vista?
Click to expand...
Click to collapse
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
G.E.O. said:
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
Click to expand...
Click to collapse
Run programs in "xp compatibility mode", it may help.
dannyt84 said:
Run programs in "xp compatibility mode", it may help.
Click to expand...
Click to collapse
No that didn't work.
I guess the problem is Vista... as always!
Hello !
I need help please, my phone don't want to get on Bootloader mannualy and I don't have a Windows PC.
Thanks !
mister-gwada97one said:
Hello !
I need help please, my phone don't want to get on Bootloader mannualy and I don't have a Windows PC.
Thanks !
Click to expand...
Click to collapse
read my sig, flashing from phone... have luck
But I can't get this step:
reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
I have a broken button..
so you have to use mtty, but you need anyway a windows based PC (as I know) to install crude usb drivers...
Ok, Thanks for your help
I use VirtualBox on Arch Linux with Windows XP... I can't flash directly on the cell as ActiveSync doesn't recognize the device, but maybe MTTY, with different drivers, works
I use virtual machine with windows xp,, to use mtty on my windows 7 based pc.
All you need is an virtual machine,,
dravik said:
I use virtual machine with windows xp,, to use mtty on my windows 7 based pc.
All you need is an virtual machine,,
Click to expand...
Click to collapse
yep nice trick, anyway I remember that there is a freeware WM5/6 driver working with unix/linux that put the device (also the internal memory) as disk drive, so you can see both memories as "just" plugged usb drives... I rememeber because I used this trick with my old dopod & FreeBSD
suiller said:
yep nice trick, anyway I remember that there is a freeware WM5/6 driver working with unix/linux that put the device (also the internal memory) as disk drive, so you can see both memories as "just" plugged usb drives... I rememeber because I used this trick with my old dopod & FreeBSD
Click to expand...
Click to collapse
He need to flash his Diamond, not to copy files on it
Mod. edit: not dev related, moved to general
[Q] SUT LR does'nt install & also the importance of flashing RC3 or sharp before CM9
Hello I'm stuck SUT LR does not install I'm on Windows 7 x64, while installing i get an error that says ''unexpected error'' I do have the ADB, java SDK kit and everything but why does this happen? I also tried renaming the RC3's .nb0 file and flashing it via stock recovery but doesn't work, I'm right now on FR's MIUI 2.3.16, cant i directly flash the CM9 directly? Please do reply looking for answers everywhere
1. Device in download mode
2. Flash using SUT 1.8.2
If you have already done that, well... use windows 32 bit . May be with win32 bit on virtual machine.
Sent from my bike using Tapatalk
CacingKalung said:
1. Device in download mode
2. Flash using SUT 1.8.2
If you have already done that, well... use windows 32 bit . May be with win32 bit on virtual machine.
Sent from my bike using Tapatalk
Click to expand...
Click to collapse
Sir the application that is ''SUTLR.msi'' doesn't install at all and why am I unable to flash it via sd card even after renaming it firmware.nb0?
superviked said:
Sir the application that is ''SUTLR.msi'' doesn't install at all and why am I unable to flash it via sd card even after renaming it firmware.nb0?
Click to expand...
Click to collapse
1. There is also SUTLR.exe if you don't want to install msi installer from microsoft.
2. Are you sure has changed the cwm recovery image to stock recovery?
3. And also consider to redownload rc3 again, your downloaded file could be corrupted. Just check the md5 file to make sure it's ok.
Sent from my bike using Tapatalk
SUTLR for 32bit and 64bit
http://www.mediafire.com/?hg583a51yqkz3y0
ardX said:
SUTLR for 32bit and 64bit
http://www.mediafire.com/?hg583a51yqkz3y0
Click to expand...
Click to collapse
Ardx thank you so much for that link SUT LR now works from the above link you sent, finally tasted cm9 not happy with it for now though so switched to modded sharp thank you !! and by saying you're not a thanks hunter you're making yourself seem modest and people like me are compelled to hit thanks
ardX said:
SUTLR for 32bit and 64bit
http://www.mediafire.com/?hg583a51yqkz3y0
Click to expand...
Click to collapse
You are a saviour ardX!
I was not able to install x64 version on both my Win 7 & Win 8 machines, but now, this file is installing in both the machines
No more relying on my roomie's lappie for x86 version
XT557
I don't know what I'm doing wrong, but I never get a prompt to of anything with the FXX_PR3_NV xml file.
I've walked through the instructions several times. What confuses me the most is the step to install the SUTLR file then select the xml file then essentially install the SUTLR file again? This seems redundant (but either way) it does not prompt me for anything, it just runs directly through the install.
thoughts?
This is for a DEFY XT557
thecolor said:
I don't know what I'm doing wrong, but I never get a prompt to of anything with the FXX_PR3_NV xml file.
I've walked through the instructions several times. What confuses me the most is the step to install the SUTLR file then select the xml file then essentially install the SUTLR file again? This seems redundant (but either way) it does not prompt me for anything, d it just runs directly through the install.
thoughts?
This is for a DEFY XT557
Click to expand...
Click to collapse
To install xml file, you should connect your device in download mode..... What I remembered about flashing process of defy, it never include installation of sut lr file again.
Any way why are you not trying rsd lite instead of sut let.... It mean for Motorola devices only. It is easy to operate also
Sent from my Desire HD using xda app-developers app
spc / mls code...
Thanks. Now my challenge is obtaining the SPC / MLS code that the provider will not "provide". :| numerous different things have been done to try and detect it, adb logcat, device logcat, ## comands, etc. with no avail. Thoughts on cracking that?
vivekb said:
To install xml file, you should connect your device in download mode..... What I remembered about flashing process of defy, it never include installation of sut lr file again.
Any way why are you not trying rsd lite instead of sut let.... It mean for Motorola devices only. It is easy to operate also
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
not working on win 64bit
i don't know what am i doing wrong, but i've tried to install sutlr 1.7.5 & 1.8.2 and none work, when i run it it says something about an incorrect format and opens a useless, empty gray window.
is there any trick to install it, is there any other way to successfully root my phone(motorola xt615)?
any help would be appreciated!