How to remove time from top taskbar in WM6.5 HELP needed - Tilt, TyTN II, MDA Vario III General

Hey guys jus wondering if theres a way to disable the time on the top taskbar/notification area.Thanks

I know for a fact that it can be done in the older builds of WM6.5, But how do u do it on the newer builds

the behavior desired is already "done" in some builds/flavors of WM6.5.
i might be wrong but what i gather is that it is a certain mix of files concocted by the chef that causes the desired behavior to break. TPC and abusalza often used the SAME base build for WM6.5 in some of their recent ROMs and abusalza's ROM was usually well behaved regarding respecting the show clock in titlebar setting, while TPC's ROMs were almost always "broken" in this respect. i recall TPC himself claimed that he "has to have it this way" cuz something else important breaks if he lets the title bar clock setting have its way.
still, it may very well be a new intended behavior from M$ in the very newest of builds (which i haven't tried out first hand or even read about in detail yet). however, this is unlikely because M$'s DEFAULT CHome has a big clock panel on the today screen and it would be redundant to have the titlebar clock always showing, especially when on the home screen. it makes more sense to show battery in that position in the titlebar when on the home screen.
hope that helps in some way??!??
EDIT: or is your question actually about COMPLETELY removing the titlebar clock AS WELL AS the battery meter that mutually exclusively pops up in its place?

Thanx not to worry, its not possible to remove time in the taskbar on newer builds so im stuck wid it

Related

1% battery increments in top bar?

Just switching over from the Hermes world.
One recent addition to Hermes ROMs was the battery icon the top bar with granularity to 1%.
ie. take a look at the 1st pic in http://forum.xda-developers.com/showpost.php?p=2522625&postcount=1
some chefs made theirs with different colors, others were 100% white.
I know the Kaiser does 1% in the battery settings page, just wondering why I didn't see this top bar change getting cooked in to any Kaiser ROMs? Did it come and go already, or just not appeal to Kaiser folks?
Yes, I am well aware of other battery meters... like I said just curious about the cooked in battery icon.. small little perk that I miss from Hermes.
The 1 percent incraments is standard in the Kaiser (meaning nobody had to make an dlls to help make it). There are ways of showing the percent on the right, just have to find the right battery program to do it
zim2dive said:
Just switching over from the Hermes world.
One recent addition to Hermes ROMs was the battery icon the top bar with granularity to 1%.
ie. take a look at the 1st pic in http://forum.xda-developers.com/showpost.php?p=2522625&postcount=1
some chefs made theirs with different colors, others were 100% white.
I know the Kaiser does 1% in the battery settings page, just wondering why I didn't see this top bar change getting cooked in to any Kaiser ROMs? Did it come and go already, or just not appeal to Kaiser folks?
Yes, I am well aware of other battery meters... like I said just curious about the cooked in battery icon.. small little perk that I miss from Hermes.
Click to expand...
Click to collapse
If you're handy with reshacker, you can look here for a start.
http://forum.xda-developers.com/showthread.php?t=321733
I created a new battery meter for my Kaiser. It's not too hard. I would post it, but it's uses borrowed images and since I don't use phcanOverbmp, it may not be too helpful for many people.

Weird layout on slide to unlock

Hi,
I'm running my tytn II on TPC Elite 6.5 (it's how I got it)
However, aside from the m2d being completely useless in landscape, the time doesn't "sit" in the correct place (image attached) on the slide to unlock screen.
Is there a fix for this?
Also, if anyone can suggest a rom good on battery, ram and with the standard 6.5 "chome" screen I'd be happy to hear from you (if it has the slide to unlock feature also I'd be happy!)
Thanks
Bayton said:
Hi,
I'm running my tytn II on TPC Elite 6.5 (it's how I got it)
However, aside from the m2d being completely useless in landscape, the time doesn't "sit" in the correct place (image attached) on the slide to unlock screen.
Is there a fix for this?
Also, if anyone can suggest a rom good on battery, ram and with the standard 6.5 "chome" screen I'd be happy to hear from you (if it has the slide to unlock feature also I'd be happy!)
Thanks
Click to expand...
Click to collapse
As it has been stated more than a thousand times, M2D was ported from a device that does not have a slide out keyboard, therefore it has been hacked into landscape as far as it can. It is what it is.
That is the " mega " screen, the clock is supposed to be offset from the gray background, just look at any other mega theme.
If you do not like either, there are plenty of other UIs around that were actually meant for the Kaiser, that work in landscape. And if you search, there are 100's of SU2U themes that you can use.
http://forum.xda-developers.com/showthread.php?t=354111&highlight=SU2U
As it has been stated more than a thousand times, M2D was ported from a device that does not have a slide out keyboard, therefore it has been hacked into landscape as far as it can. It is what it is.
That is the " mega " screen, the clock is supposed to be offset from the gray background, just look at any other mega theme.
If you do not like either, there are plenty of other UIs around that were actually meant for the Kaiser, that work in landscape. And if you search, there are 100's of SU2U themes that you can use.
http://forum.xda-developers.com/show...highlight=SU2U
Click to expand...
Click to collapse
I'm aware M2D is a port, that's why I said aside from it sucking in landscape. I don't use it anyway. It has been disabled on my rom.
Why on Earth would anyone think having it offset like that could look good?! Thanks for the link. I'm looking for a new rom (I say looking, haven't found one yet.. is it more difficult to flash than the wizard? It's already been flashed, so I assume it's ready to go in terms of setting it up?), but first would like to knock it back down to an official rom for a bit. Is this rom the correct one for my device? Or, as it's a dutch phone, should I use a different English version (I don't want it in Dutch you see).
As a guess i'd go into S2U2 settings and disable the Top Curtain... & bottom as it's overlapping the droid look slider...
Thank you Stylez!
Exactly what I was looking for, and it seems I can simply change the background (which is what the grey part is).

SE Panels 1&2 with 23529 build

With the new builds that have start orb at the bottom of the screen because top bar is smaller and bottom bar is bigger the panel background has to be moved a few pixels up. Does anyone know how to do this?
Hasn't anyone seen this problem before?
Im sure most of us have noticed it, but there is no fix for it (yet at least) otherwise im sure our great cooks would have made sure to add that to their roms. You're probably gonna have to either stick to the ould user interface, get used to the graphic glitch or stop using panels. Sorry for the bad news.

[Q] Energy ROM Question?

I have a question and a little help needed also...So here goes:
I have been using NRGZ28's EnergyROM's for quite some time and have also modified the bottom Softkeybar and buttons to be for me good looking with gold on the edges, etc. Can't post them I don't think because NRGZ28 owns EnergyROM, and it happens t be the ROM that all of my crews in Special Forces use to communicate. Like he mentions it's just eye candy, but it's also White and I kind of guess it's a Win CE 6.5 issue and the white logo is located inthe Shell32.dll, which I don't hve the Software needed to pull the Dll and change it....
So I have a small area that is the left bottom button that you hit to get t your apps and folders... Now the problem is ,is that I ave all this cool buttone, etc and have a app launch left button with a White Win Logo on it.
I can't find where to change it with Photoshop CS5 looking at all the imported manila files and all png's period?
Does any one have any idea how to change that, I thought that the "Energy.RHODIUM.23150.Sense2.5.Cookie.Dec.05" would have at least made a cover png in the ROM or place a png of the Win ColoredLogo over the coordinates of the white win logo launce button left botton andbe cool?
So I thought I would ask here as I have tried to get in touch with NRGZ28 on his Twitter page with no response..
So there,.... I am a programmer but an F-22 pilot first in the military so I leave the programming to the pro's.. and we have a lot going on right now... Can anyone point the correct direction, I have seen cab's with softkeybars that cover the white logo with the real win colored logo.
If it's in the Cookie 1.8.5 cht files or the Manila files please gove me the manila name or the cht name?
If the spelling of anything is off, sorry can't install the spell checker here.
Thanks
Col. L.A. Hutcheson
aka Automan
F-22 huh? Damn, that's a sweet bird. I envoy you. I'd just about give my right arm to go up in one (or any fighter really).
Anyways, I'm not sure about the answer to your other question. But I doubt that it's Energy specific so you might try posting in one of the more general forums like Windows Mobile Development and Hacking. Your best best is probably try the themes and skinning forum. I can almost guarantee that someone there can give you the answer to your question.
Perhaps if you posted a screen shot, we could assist you better. NRG doesn't mind you modding or changing his ROMs. As long as you don't steal credit for them, he doesn't care what you do with them.
Sounds like you're talking about the Start Button Image. Now for the "normal" 6.5.X Softkey Bar, there's a PNG. The image used depends on the theme (tsk) applied. You'll need to check the registry to find which image is being used. The Icon in Shellres.192.dll is only used in 6.5 when the start menu is on the topbar or if the .tsk is missing the link to the image in 6.5.X.
HKCU:Software\Microsoft\Today\BubbleTile\BubbleTileFlagIcon
HKCU:Software\Microsoft\Today\BubbleTile\BubbleTileFlagDisabledIcon
If you're using the CHT 2.o SoftKey Bar, the image is \windows\CHT_softkey_win.png.
Slight Change in Energy ROM Home Screen..
OK Here we go, guess I should have done this in the first place.......Making these Cell sections for the teams I work with for darkness usage gets kind of frustrating, but it helps a lot as in the resent past...!!!
The imake with the item Pointed, that I need to change not only in this Sense today screen but also the Sensity also latest versions.
Hope the image shows on the post if not just use the link.
I really appreciate th help as I do beleive as a Commander in the military that some of the teams are really going to be very busy on the other side of the globe very shortly...
The Sencity theme ROM is great with the Today Screen but the white SoftKeyBar Icon Images Iwould have to change and also all of the pages of setup areas like the ticks for settings, etc. So I am just going to and try to merge the Sencity Front Home Screen flat appointment, etc areas with this ROM for the time being...
Thank You for all the help and I also wanth to credit NRGZ298 for a great ROM, not too much but shur as H**l as much as we need..
Sincerely
Col. L.A. Hutcheson
C/S SwampFox
aka Automan
Automan said:
OK Here we go, guess I should have done this in the first place.......Making these Cell sections for the teams I work with for darkness usage gets kind of frustrating, but it helps a lot as in the resent past...!!!
The imake with the item Pointed, that I need to change not only in this Sense today screen but also the Sensity also latest versions.
Hope the image shows on the post if not just use the link.
I really appreciate th help as I do beleive as a Commander in the military that some of the teams are really going to be very busy on the other side of the globe very shortly...
The Sencity theme ROM is great with the Today Screen but the white SoftKeyBar Icon Images Iwould have to change and also all of the pages of setup areas like the ticks for settings, etc. So I am just going to and try to merge the Sencity Front Home Screen flat appointment, etc areas with this ROM for the time being...
Thank You for all the help and I also wanth to credit NRGZ298 for a great ROM, not too much but shur as H**l as much as we need..
Sincerely
Col. L.A. Hutcheson
C/S SwampFox
aka Automan
Click to expand...
Click to collapse
Why not ask about it in the .sencity thread? In the screen shots of the theme in the sencity thread, it shows that bar to be working properly.
See attached in this post,
http://forum.xda-developers.com/showpost.php?p=9890626&postcount=2
cajunflavoredbob said:
Why not ask about it in the .sencity thread? In the screen shots of the theme in the sencity thread, it shows that bar to be working properly.
Click to expand...
Click to collapse
The problem he's having, is he likes the Sencity Theme, but not the white icons on the slider & settings page, etc. So, he's trying to make his own theme, but doesn't know what _manila files to edit. The attached in the above linked post has the 6 files that manila uses.
EDIT: My suggestion though is to Flash the normal Energy ROM without the theme applied. Than, download the Sencity Theme CAB. Dump the cab using WinCE CAB Manager & delete the icons, etc you don't like. Finally, remake the CAB with only the files left over to install over the normal Energy ROM.
drkfngthdragnlrd said:
The problem he's having, is he likes the Sencity Theme, but not the white icons on the slider & settings page, etc. So, he's trying to make his own theme, but doesn't know what _manila files to edit. The attached in the above linked post has the 6 files that manila uses.
Click to expand...
Click to collapse
Oh, I thought he was trying to edit the Energy ROM that he was using. I was confused since the .sencity themed Energy ROM already has that cooked in. This makes more sense.
cajunflavoredbob said:
Oh, I thought he was trying to edit the Energy ROM that he was using. I was confused since the .sencity themed Energy ROM already has that cooked in. This makes more sense.
Click to expand...
Click to collapse
Yeah, from what I get, he's a commander of troops using the Energy ROM on their devices & trying to make it as dark as possible so when they use them at night, it won't give away their position like shining a flash light in the air.
drkfngthdragnlrd said:
Yeah, from what I get, he's a commander of troops using the Energy ROM on their devices & trying to make it as dark as possible so when they use them at night, it won't give away their position like shining a flash light in the air.
Click to expand...
Click to collapse
I'm a squad leader, myself, but I make sure that everyone who is planning to bring a phone with them turns the brightness all the way down. I normally like to use GTX. Even in the pitch black night, on the lowest backlight level, you can't see the device at all as long as you aren't stupidly waving it over your head. lol (silly new privates...)
OK;
I guess without getting too involved in what we do, I was trying " yes " to ues the nornal ROM and change the images on the Home page to the Sensity type.. I apologize folks but I can't go into too much except my positon and who serves under my command.
These young men deserve every aspect of technology and every edge that I can give them. The military takes over our carrier signal and then there is a program we run that has all we need for position of I.A.C.C. In Area Combat Control. We are some of the darkest units that exist, and are called on to go and do some of the jobs that require only a few to get some one out of an area they are trapped in of rescue combat groups that are out too far and trapped. We are at night always and never leave them behind.
So there that's about as far as if it isn't too far already as I can go into it. We have gear we use but we have found that being resourceful and using everyday items we can walk the day and if stopped it's just a phone...But hidden is the heart of all the cells power..
What I thought I would do is use the one in the image I posted and transfer the Sensity Flat Black png's in the Sencity ROM to this one. The graphics that NRGZ28 uses in Sencity on the home page are perfect but I would have to change their color to a darker or blacker background. So I guess after I used the manila extractor to bring out to a hard drive all the manila files I then change them to PNGs and place them into another directory.
I have loaded both ROM's and done the same thing and then tried to find the images in the flat Home section manila files change them over to mine with Photoshop, then re-inserted the Manila files from a dir that I save all the changed manila files into.
Then when NRGZ28 comes out with a new ROM I load it and then insert my images over his and PRESTO. Done and gone to play at what we do best.
These civilian oppertunities that present themselves is up to Commanders to change so that it is on less thing my men have to worry about. If they have to type longitude and latitudes in for a pickup during a rush fire fight then they can trust the cells totally with out being seen..
I always strive to do everything I can to dodg the Gov. and not have to wait forever to get equiptment that I think is necessary... An old saying is that a good engineer will use what he's got to build something instead of buying it or ordering it through channels.. If we order it, they know somehow what we have...Bingo you got the story...Always evolving in the field is called staying alive!
Thank for all te input folks, I do really appreciate it, as I have been folloring NRGZ28 ROMS for a year now and won't change but I must make this one happen, I's just too close..
Sencity has too small of checkboxes, etc. if you have to make changes in the field.. It's great here at home. But the other normal ROM is perfectly to see but need Sencity Home Graphics....
Yep!! Went too far into it!! I hope this doesn't get away from me in the wrong way but, it's just a blend of the two. I always figured it was some where in the registry and the images..
I will be asking the XDA folks to clear this Question post pretty soon for good reasons, and keep hitting little post here and there till I have all of the Manils files to make this a simple -> Here guy's load the Rom and import these Manila files....Done Deal!!! Quick and really logical..
Thanks anain folks I appreciate your drive on this one.. Hope I placed the right info here now. If anything else is needed to explain, just let me know..
Thank You
Sincerely
Col. L.A. Hutcheson
aka Automan
C/S SwampFox...and it's for a reason!
Son;
I hate to say this but GTX is good stuff, but at two miles I could see the glow with an M2..Even at the lowest level you have to realize that you may be on the move and if you are then " You're waving it around ". Be safe out there and never use white background on cell as it's called Phos. Glow...
Good to see ya here though, wondered when someone would show up....!! Some of my folks are monitoring this build I'm trying and I will tell you this much, it's way harder to see a letter thats a grey color than a dimmed white back...We tested it and it and for sure that at two to three miles we could see main components lighter better than small letters dim lite..Just makes Sense <- Well go figure?
Take Care!! Be safe...! I have been doing this since Vietnam....
Now guess who got Moussahwe or what ever his name was in Iraq? Iraq troops got there and the Marines got there and both said they didn't do it.
We were standing 100 yards from them in black and listning to what they said? He was overdosed with Morphine after telling what he needed to..
1 of Fifty gone of list...
Take care again and good to type at you....
I'm out and working on this again....
Thanks for what you do Squad Leader....!
We'll be seeing you....and pls don't use GTX in the field, I know cool and and dead isn't cool, it's cold!
Sincerely
Col. L.A. Hutcheson
aka Automan
C/S SwampFox..
You missed the point of my post. I use GTX normally. When I'm in the field, no matter what ROM I use, The backlight is always turned all the way down. This is nothing new for me. Dimming the backlight keeps the screen in the dark. Even if you're using a black or dark theme, if you're backlight is set to auto or a high setting, it's easy to pick out.
Before we go anywhere, one of the things on my checklist is to make sure that all cells have the sound off and backlights turned down. My main point was that the theme that you use makes less difference in terms of visibility at night than the backlight control does.
Waving your phone around like an idiot will get you seen no matter which ROM or theme you use. Anyway, concealing the device is what's most important. I prefer to rely on the glow-in-the-dark equipment for its low light output and ease of concealability.

Using 6.1 theme on WM 6.5.3?

I notice that if I apply an older WM 6.1 to my 6.5.3 device, I get the old style popup/context menus where all the options appear on one screen, rather than the newer, larger, more "finger friendly" menus which require scrolling up and down to see all options. I like the old-style ones better.
Unfortunately applying an older theme also seems to have the side effect of messing up some of the icons on the bottom menu bar so that they either don't display at all, or display incorrectly. Is there any way to cause ONLY this old-style menu change to occur, without messing anything else up? Either through a registry edit or some other way? Alternatively, is there a way to fix the bottom menu bar on 6.5.3 when a 6.1 theme is applied?
I haven't done any theme editing before so if anyone could provide any assistance it would be greatly appreciated, thanks...
What type of theme have you applied? For what UI?
Just the regular Windows Mobile UI. By default my device has the "Classic Blue" theme selected out of the box, which works fine. As a test I installed Windows Mobile 6.1 Green Theme found here:
http://www.freewarepocketpc.net/ppc-download-windows-mobile-6-1-theme.html
It mostly does what I want with the menus, but for example in the email/POutlook app (among others) in the bottom menu bar the OK/X button is okay, but the icon/button for "Menu" is completely missing. There is no icon, nor any word in its place. It is just blank, yet tapping on it still does bring up the menu as desired. This is what I am not usre how to fix. Alternatively, I'd be happy with just changing these menus back to the old compact 6.1 style without affecting anything else, but right now applying an old-style theme is the only way I know of accomplishing this.
there are a lot of themes, better to find at least a 6.5 of your taste.
make a search here on xda or look here
The thing is, I'm not really too concerned with the appearance part of things, so the look of a theme doesn't matter that much to me. What I am mainly trying to accomplish is getting the old smaller, compacted system/context menus that we used to have on 6.1.
For example when you're in email (Pocket Outlook) viewing your list of messages, and you want to check for new mail, you hit the "menu" button and then select "Send/Receive". It's that menu I'm talking about. On the old OS version you could see all items on the screen at once, but with the new finger friendly 6.5, you have to scroll up and down to get to various items, such as Send/Receive.
That's the only thing I'm trying to change: getting those old menus back. And currently applying a 6.1 theme is the only way I know of doing so, but it also messes up the bottom menu bar under 6.5.3. So I'm hoping to either find another, easier way of restoring those old menus, or finding a fixed/tweaked 6.1 theme that doesn't mess up the menu bar on 6.5.3.

Categories

Resources