Magnet fell out - Touch Diamond, MDA Compact IV General

My magnet that holds the pen fell out - luckily i didn't lost it. However, i cannot find the place where it should fit in. Does anyone have a picture or can tell me where that thing normally sits?
Thanks!

Matmax said:
My magnet that holds the pen fell out - luckily i didn't lost it. However, i cannot find the place where it should fit in. Does anyone have a picture or can tell me where that thing normally sits?
Thanks!
Click to expand...
Click to collapse
i thought it was the stylus thats magnetic nt the diamond lol

mancsoulja said:
i thought it was the stylus thats magnetic nt the diamond lol
Click to expand...
Click to collapse
A small piece of metal fell out which is magnetic. The stylus doesnt hold alone any more....
Any idea where that thing sits ?

Related

Piel Frama case is available NOW!

http://www.pielframa.com/cases_t-mobile_ameo.htm
http://www.pielframa.net/promo_ameo.asp
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.
ltxda said:
Just got an e-mail from Ruben at Piel Frama with all the info on the case. It's available and ready for purchase on their site now.
EDIT: Just e-mailed him asking if there is a belt clip option with this case. Awaiting his response.
Click to expand...
Click to collapse
I need one with belt clip. Their site does not show the belt clip option I have the PDair one without clip at the moment.
victoradjei said:
I need one with belt clip. I have the PDair one without clip at the moment. Need feedback asap
Click to expand...
Click to collapse
Waiting on good ole Ruben to respond.
Good News !!!
75€!!!...bad news indeed!
A belt clip isn't going to be available for the case. i emailed them last Wednesday with the same question and got a reply Thursday, and they stated a belt clip wont be available because the unit is to heavy, and they dont want to risk damage to the unit.
I think £51 for a decent leather case is not bad considering they are hand made, looking forwards to mine arriving as the T-Mobile supplied case with my Ameo has done more damage than any abuse I could throw at the device, the plastic body has taken a hammering from the retaining lugs of the case - should look good in Green
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike
I'm just going to put a chain around it and hang it on my neck. LOL, yea right.
How do you guys work around the plastic cover for the screen on the case? In my experience, when I purchased other cases with screen covers, the device wasn't very usable as I use the screen tap all the time. I had to cut the plastic out. I may have to do it with this one as well.
What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.
RichardKAthena said:
What plastic cover for the screen? I see no cover.
I see a small bit of plastic covering the LEDs, and there's a cutout or window for the status display. The screen area looks uncovered to me.
Mine may be here sooner than I thought, then! Red for me, as it'll look excellent in photographs.
Click to expand...
Click to collapse
Yes on the screen. I hope they didn't put one on there. Just makes no sense to me to put a cover on a touch screen device.
When yours arrives, would you mind posting some info on the case? Your likes/dislikes? I'm going to order one but will wait till next week possibly.
Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do
RichardKAthena said:
Of course I will post info, but I was told 15 days, as with the original post. If I have it sooner, then expect pictures and a mini review, because that's what I do
Click to expand...
Click to collapse
Sweet and thanks.
I wondering if they took our suggestions and implemented them into the design or if they came up with the case all on their own. I e-mailed Ruben a while back giving him a link to a post we started with things we would like to see of a case for this great device. One being the status window for when the phone is closed, etc.
I can't wait to read your mini-review.
just ordered mine. I ll let you know my thoughts and post pics as soon as it arrives
i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers
tvrman said:
i think the window in the case (which you can see the date and time), will not work , because the keyboard needs to be closed on the screen self, and now the case is between the keyboard and the screen
Maybe i could be wrong but a short test show me that this wil not work.
Please let me know if i'm wrong on this.
cheers
Click to expand...
Click to collapse
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.
apphoen said:
Just to clear up your confusion....
Turn your keyboard round so the CLEAR (Transparent, see-through, whatever you want to call it) plastic is over where the cut-out on the case would be. Et voila! You can now see the screen.
Click to expand...
Click to collapse
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.
tvrman said:
Yes but i mean, the funtion of this wil only work when the keyboard is flat tot the screen (then the screen wil turn over to the date and time function).
try it yourself without the case , and try to remove the keyboard slowely
then the screen turn out of the date and time mode.
sorry for my english i'm from the dutch.
i'll hope you see the point now, the case self suites oke with the window on it
.
Click to expand...
Click to collapse
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.
mikealder said:
As for a belt clip, it could prove embarassing - lets face it with the weight of the unit you could end up with trousers around the ankles in a very short time - Mike
Click to expand...
Click to collapse
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.
Sniper2075 said:
How would having the unit on your belt instead of in your pocket change the fact that your pants don't fit and will end up around your ankles. The same amount of weight will be pulling your pants down either way. I sometimes carry much more weight on my belt than the x7500 and my pants don't fall down you just need to wear a belt.
Click to expand...
Click to collapse
Either option is a non-starter for 'average' sized blokes. There's no way I could get the Athena in any of my trouser pockets.... and it would just look bloody silly attached to my belt.
apphoen said:
Aha, I see what you mean. Yes, the cutout on this case is only useful for people like me who use the keyboard and carry it around with them.
Click to expand...
Click to collapse
Um, that's not what he means at all.
What he's saying is that the Athena needs to "detect" the keyboard is flat across the screen, rather than not properly aligned or not quite attached - so the leather panel on the case will mean the keyboard is likely to not be detected and therefore, the software will not change over to display the status bar.
It depends on the thickness of the leather, but a quick test with my PDair case certainly shows this to be true. Despite the keyboard "snapping" into place across the screen magentically, the Ameo doesn't sense that it is properly closed, and therefore doesn't switch the display over to the status bar.

Brodit - HD2 Passive Holder

Just to let you all know, the HD2 Passive Holder is now listed on Brodits website, it's not available to buy yet (just says 'coming soon') but there are pictures.
I emailed Brodit asking them when it will be released and this was their reply:
"This is under construction will be ready any day so please check our website for updates."
Mmmh nice, but need an active one
Hope they make a model voor landscape
Always liked Brodit...hope they can come up with the "goods" for the HD2 soon.
ChefChaudart said:
Mmmh nice, but need an active one
Click to expand...
Click to collapse
Looks like 'Brodit' read your post lol, there are now 2 active holders for the HD2 listed on their site.
seabird001 said:
Hope they make a model voor landscape
Click to expand...
Click to collapse
I have the brodit active and you can use them for landscape. HD2 fits in firmly and won't fall out
tnx. Got the passive and is also good for landscape
seabird001 said:
tnx. Got the passive and is also good for landscape
Click to expand...
Click to collapse
Can you post pics of it in landscape?
thomas_pieps said:
I have the brodit active and you can use them for landscape. HD2 fits in firmly and won't fall out
Click to expand...
Click to collapse
I got my Brodit holder today. To be honest, it fits a bit too 'firmly' for my taste. Since the HD2 has these 'rubberized' sides I'm afraid it will rub them off as I keep squeezing it in and pulling it out.
I have no intention of using the phone landscape in the car, IMHO that's a waste of time and space as most of the time I'M more interested in the forward direction than what is left and right of me, so portrait suits me just fine. I don't need it to copy the layout of a GPS to use it as one.
So now I have a piece of wood wedged into the holder to 'untighten' the unit a bit.
This is my first HTC with the rubberized exterior. Does anyone have experience with the outside material and how lasting it is? IIRC the Touch Pro had issues with this rubbing off too quickly.
TIA
ewok666 said:
I got my Brodit holder today. To be honest, it fits a bit too 'firmly' for my taste. Since the HD2 has these 'rubberized' sides I'm afraid it will rub them off as I keep squeezing it in and pulling it out.
I have no intention of using the phone landscape in the car, IMHO that's a waste of time and space as most of the time I'M more interested in the forward direction than what is left and right of me, so portrait suits me just fine. I don't need it to copy the layout of a GPS to use it as one.
So now I have a piece of wood wedged into the holder to 'untighten' the unit a bit.
This is my first HTC with the rubberized exterior. Does anyone have experience with the outside material and how lasting it is? IIRC the Touch Pro had issues with this rubbing off too quickly.
TIA
Click to expand...
Click to collapse
Place in in some warm water for a couple of minutes and then tweak it.
Speedmaster said:
Place in in some warm water for a couple of minutes and then tweak it.
Click to expand...
Click to collapse
Is that the holder or the phone
Got my brodit passive holder today ....it is very tight on the phone and would leave marks ....I ve put mine warm/hot water and left a clamp on it to make 1-2 mm wider then left it to cool

7" case that may work for the A7

I wonder if this case will fit? I may just have to order one and find out.
Link: www.dealextreme.com/details.dx/sku.40971
UPDATE: Just ordered one... So we'll see.
UPDATE: Case just arrived. the case is nice and works well. Mine seem to have the right lower strap sown in a little off. The right strap doesn't fit as well as the left. Still I like it better some some of the other options I've seen and for the price I can't complain.
some pics here:
Note the case is a little lighter in color than it appears in the photos.
http://i210.photobucket.com/albums/bb141/RojasTKD/IMG_0755.jpg
A7 in case
http://i210.photobucket.com/albums/bb141/RojasTKD/IMG_0756.jpg
A7 in case
http://i210.photobucket.com/albums/bb141/RojasTKD/IMG_0757.jpg
Notice the right lower strap doesn't fit was well as the other side.
http://i210.photobucket.com/albums/bb141/RojasTKD/IMG_0758.jpg
what case are you talking about. i ordered a case crown case http://www.amazon.com/CaseCrown-Pro...VE14/ref=sr_1_2?ie=UTF8&qid=1293866090&sr=8-2
for my elocity and it works great even has a zipper pocket for usb drives or sd cards etc...
edit: im not sure it i like the inside lining. its leaves an imprint on the screen you have to wipe off
nev310 said:
what case are you talking about. i ordered a case crown case http://www.amazon.com/CaseCrown-Pro...VE14/ref=sr_1_2?ie=UTF8&qid=1293866090&sr=8-2
for my elocity and it works great even has a zipper pocket for usb drives or sd cards etc...
edit: im not sure it i like the inside lining. its leaves an imprint on the screen you have to wipe off
Click to expand...
Click to collapse
Sorry, I forgot to add the link. Fixed that.
it looks like it will work but it the headphone and power plug might be blocked
Hoping it will arrive next week. I'll update on how it works.
nev310 said:
edit: im not sure it i like the inside lining. its leaves an imprint on the screen you have to wipe off
Click to expand...
Click to collapse
I also have the case crown case. I'm a freak about keeping the screen clean, and I can see how easy it would be for fingerprints to transfer from the screen to the inside of the case.
I've had it 2 weeks now and have yet to see the imprint on the screen that looks like the lining. Just keep the screen clean before putting it in the case. I keep a silk wiping cloth in the front zipper pocket just for that purpose.
Did you get it Yet? How is it?
Nope not yet.... I didn't ship until Jan 10th.
It may arrive any day now (I hope). I'll have to check with my post office to confirm they don't have it, then contact them to see what's going on.
DealExtreme has great pricing but....
It takes forever to get their stuff. My first order took over 30 days. There was some problems with that order and the second order was placed in November and I just got it last week. I hope you have better luck than me.
Good Luck!
Dale
Well, what do you know.... It arrived today.
Will link pics to the original post.
This is the case I'm using. It is a Targus case at Best Buy. Had to modify it slightly because the power button is covered. I used an Exacto knife and cut a small square to use a stylus to turn the power on. Another small mod I need to do is to figure out how to recharge the A7 without removing it; a slight inconvience but the case is very protective and secure for the A7. High quality leather. $29.99
hXXp://www.bestbuy.com/site/olspage.jsp?id=cat13506&type=page&skuId=1465285&productId=1218261354694&defurl=false&h=387
Apparently the link does not work. So here is a picture of the Targus case for the Nook.
I got my from another site. It's a white case with keyboard. I really love the keyboard design. Really user friendly.
Geoowl said:
I got my from another site. It's a white case with keyboard. I really love the keyboard design. Really user friendly.
Click to expand...
Click to collapse
How did you get the keyboard to work?
PhillyGirl2011 said:
How did you get the keyboard to work?
Click to expand...
Click to collapse
My guess would be, he plugged it into his USB port.
RojasTKD said:
My guess would be, he plugged it into his USB port.
Click to expand...
Click to collapse
Internet high five
Nicccce!
I bought one and the usb does not operate the keyboard. The keyboard works when plugged into my windows computer so it is not broken.
Any other bright ideas?
Sent from my A7-040 using Tapatalk
RojasTKD said:
My guess would be, he plugged it into his USB port.
Click to expand...
Click to collapse
Nicccce!
I bought one and the usb does not operate the keyboard. The keyboard works when plugged into my windows computer so it is not broken.
Any other bright ideas?
Sent from my A7-040 using Tapatalk
PhillyGirl2011 said:
I bought one and the usb does not operate the keyboard. The keyboard works when plugged into my windows computer so it is not broken.
Any other bright ideas?
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
I bought a black keyboard case for my A7 tablet on eBay and it works!
My tablet was bought this month and the usb port works with the keyboard case. You have to bend the holders to fit the A7 since it's smaller I'm now waiting to get screen protectors for tablet (using my trimmed my iPad screen protector, will try the Galaxy ones and see if they fit).
I paid less for it - hxxp://cgi.ebay com/7-Case-USB-Keyboard-Epad-Apad-MID-Android-PC-USA-/250786642546?pt=LH_DefaultDomain_0&hash=item3a640c7a72#ht_5229wt_907
I´ve had the Crown Case since Thursday. Stop the search...this is the one. Fit. look and feel is pure greatness! Side pocket is perfect for spare Micro SD and earbud\mic storage. Perfection!

Ask me about my DODOcase

Well, got my DODOcase in the mail today. It won't shield your Nexus 7 from large amounts of physical abuse, but I got it so I can put my tablet down without having to worry about scratching it up. There is indeed a magnet embedded in it to turn the tablet on when you open it, off when you close it.
I would post a picture, but I am not allowed by the forum software.
Maybe an attachment will work?
There's another thread for Dodo case http://forum.xda-developers.com/showthread.php?t=1795089
TahrirSquare said:
There's another thread for Dodo case http://forum.xda-developers.com/showthread.php?t=1795089
Click to expand...
Click to collapse
That seemed like it devolved into a patent argument. I will answer questions there too though.
Question: if you flip the cover all the way back, does the magnet turn off the screen? Thanks.
How does it fell when holding it? As in, with the cover folded back does the thick side feel strange? Do you trust the adhesive? How thin is it when closed? How well does the stand work on a normal desk surface?
Thanks!
Clarkster said:
How does it fell when holding it? As in, with the cover folded back does the thick side feel strange? Do you trust the adhesive? How thin is it when closed? How well does the stand work on a normal desk surface?
Thanks!
Click to expand...
Click to collapse
+1
I prefer to hold the N7 in portrait format when I'm out and about.
EPhibian said:
Maybe an attachment will work?
Click to expand...
Click to collapse
New test leper is a great song
Clarkster said:
How does it fell when holding it? As in, with the cover folded back does the thick side feel strange?
Click to expand...
Click to collapse
Just like a book; Kinda scary the first time, it really feels like cracking open a hard-cover book.
Do you trust the adhesive?
Click to expand...
Click to collapse
Without question. There is no way the tablet will come out without some serious force (not so much it does damage if you do want to remove it fthough).
How thin is it when closed?
Click to expand...
Click to collapse
3/4 of an inch, not quite two tablets on top of each other I think.
How well does the stand work on a normal desk surface?
Click to expand...
Click to collapse
I am assuming you mean setting it on its side in land-scape mode? That is the one thing that is a little weird. From what I see on the site, you basically but the elastic band underneath the opposite end. It keeps it up-right, but there is not much room for adjustment. I don't use tablets in that way very often though.
danlo said:
Question: if you flip the cover all the way back, does the magnet turn off the screen? Thanks.
Click to expand...
Click to collapse
Nope, only when you close it the right way.
danlo said:
I prefer to hold the N7 in portrait format when I'm out and about.
Click to expand...
Click to collapse
I should clarify that that actually works well for me.
I just got one of these DODOcases and I'm really impressed with it. The adhesive is surprisingly strong, once you have the Nexus 7 in place it does not budge a millimeter. I'm very partial to the low profile that this case offers. The 'smart cover' functionality works just as expected. It's not going to give you an Otterbox level of protection, but it should be enough do the job in preventing damage if you were to accidentially drop it in a normal day-to-day situation.
It's not quite as comfortable to hold with the case as it is without, particularly in landscape mode. That's to be expected since I feel that one of the real strengths of the Nexus 7 was how comfortable it is to hold, and with any case you're likely to give up a little bit of that. It feels like you're holding a small hardback book, and that's not an unpleasant feeling. The adhesive is so strong that I might be more hesitant to remove the Nexus from the case as often as I might with a different case, but that might be a good thing. The only other drawback to the case is that the stand functionality that the case offers is pretty limited, and as a result it doesn't support very good viewing angles for landscape mode viewing on a desk or table top. If they marketed a stand to go along with the case they could probably do some business.
The aesthetic touches do have a nice emotional resonance for me, it really does add a classic 'reading a book" feeling to using the Nexus.
All in all I'd give it a 9/10
Do you guys have an extra coupon code you can message me? Thanks
cyi1 said:
Do you guys have an extra coupon code you can message me? Thanks
Click to expand...
Click to collapse
Here ya go http://curebit.com/x/QKua1 . I think that will expire in a couple days, FYI.
I don't use facebook lol oh well. going with treegloo
I picked up a Dodo hardcase for my N7 yesterday straight at the HQ. It's pretty awesome all around.
Adhesive is strong and as was said previously, the device doesn't move a mm. That said, the power and volume buttons are awkwardly positioned because they are slightly set back from the edge of the tablet so you need to sort of wedge your finger under (not far) to push them. The landscape stand works pretty well using the elastic band and clips but the angle is not adjustable. Folded back the device feels good in the hand and the magnet doesn't affect the device improperly when in the fully open position behind the tablet.
The look and feel of the case are very high quality and I love that it's made start to finish here in SF. I got a little tour of the factory, which is probably smaller than you imagine given the brand presence and there were some cases being assembled while I was in there. Everyone that I spoke with was super nice and you know this is a company that believes in their product and would stand behind it. It seems that they've come up with a great, innovative repurposing of bookbinding machinery.
Does the adhesive leave any residue on the back?
Sent from my LG-P999 using xda app-developers app
redmonke255 said:
Does the adhesive leave any residue on the back?
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
You prompted me to attempt to remove it for the first time. The answer is no residue whatsoever. However, that adhesive is really really strong. I unclipped the back panel from the screen on accident while pulling it up. No harm done it just pressed back together.
How does this work for gaming in landscape? Ex. Deadtrigger
Sent from my Nexus 7 using Tapatalk 2
taC nayN said:
How does this work for gaming in landscape? Ex. Deadtrigger
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'm not familiar with that game but I looked at it on the Play store. Not sure how well it would work? Can't see it being a problem though.

Seidio Ledger Case

I picked up a Seidio Ledger Case. Nice build quality. Very easy to get the phone in but a little difficult to get it out. DO NOT grab it by the flip cover while trying to remove it. Tore it just the tiniest bit. Completely my fault though, I was tugging pretty hard. Overall I'm pretty happy with it but it doesn't activate the sleep/wake function on my M8. Is it not supposed to or is there a setting I need to change on the phone to activate that feature?
ajk511 said:
I picked up a Seidio Ledger Case. Nice build quality. Very easy to get the phone in but a little difficult to get it out. DO NOT grab it by the flip cover while trying to remove it. Tore it just the tiniest bit. Completely my fault though, I was tugging pretty hard. Overall I'm pretty happy with it but it doesn't activate the sleep/wake function on my M8. Is it not supposed to or is there a setting I need to change on the phone to activate that feature?
Click to expand...
Click to collapse
No setting, probably doesn't have a magnet on the flip cover? Should be one that hits the middle left side of the phone to trigger the on/off when opening/closing. Try it with a magnet and you'll see what I mean.
henderjr said:
No setting, probably doesn't have a magnet on the flip cover? Should be one that hits the middle left side of the phone to trigger the on/off when opening/closing. Try it with a magnet and you'll see what I mean.
Click to expand...
Click to collapse
It's got a magnet on the right side to keep the flip closed. Ran a magnet all along the left side and got nothing. Wonder if it's a rom thing though. I'm running viper rom. Does this phone have the screen on/off magnet feature normally? Never tried it before flashing away from stock.
ajk511 said:
It's got a magnet on the right side to keep the flip closed. Ran a magnet all along the left side and got nothing. Wonder if it's a rom thing though. I'm running viper rom. Does this phone have the screen on/off magnet feature normally? Never tried it before flashing away from stock.
Click to expand...
Click to collapse
I have viper and was just able to do it. Even thinks I have the dot view case on if I leave the magnet on and hit the power button. Don't have a way to show you unfortunately
henderjr said:
I have viper and was just able to do it. Even thinks I have the dot view case on if I leave the magnet on and hit the power button. Don't have a way to show you unfortunately
Click to expand...
Click to collapse
Where exactly are you putting the magnet?
http://youtu.be/vFYqEiIH-dw Used my pc's webcam. Upside down but you get the idea. Left side about 1/4 way in, half way up the phone.
If it doesn't work for you maybe you need to have the dot view app? https://play.google.com/store/apps/details?id=com.htc.dotmatrix
henderjr said:
http://youtu.be/vFYqEiIH-dw Used my pc's webcam. Upside down but you get the idea. Left side about 1/4 way in, half way up the phone.
If it doesn't work for you maybe you need to have the dot view app? https://play.google.com/store/apps/details?id=com.htc.dotmatrix
Click to expand...
Click to collapse
THANKS!. I was putting it right on the edge.
Here is what it did. Used double sided tape and this REALLY thin small round magnet I picked up in a pack at an office supply store. Put the magnet on the screen with the double sided tape on it. Stuck a business card into the car holder slot of the flip and put a piece of tap across the very top of the card to mark exactly where it sits when in the slot. remove the card from the slot and tapped it to the flip. closed the case so that the magnet now stuck to the card. Removed the card, put a piece of tape over the magnet to secure it better to the card and then slid the card back into the card slot. PERFECTION!!
Edit: It will activate DOT VIEW if you flip the case completely over.
ajk511 said:
THANKS!. I was putting it right on the edge.
Here is what it did. Used double sided tape and this REALLY thin small round magnet I picked up in a pack at an office supply store. Put the magnet on the screen with the double sided tape on it. Stuck a business card into the car holder slot of the flip and put a piece of tap across the very top of the card to mark exactly where it sits when in the slot. remove the card from the slot and tapped it to the flip. closed the case so that the magnet now stuck to the card. Removed the card, put a piece of tape over the magnet to secure it better to the card and then slid the card back into the card slot. PERFECTION!!
Click to expand...
Click to collapse
Glad I could help
Be careful using any credit cards with a magnet so close to them. Sort of defeats a large purpose of the Ledger case doesn't it/
wpbcubsfan said:
Be careful using any credit cards with a magnet so close to them. Sort of defeats a large purpose of the Ledger case doesn't it/
Click to expand...
Click to collapse
Actually got it because I wanted a flip case and liked how it looked. Figured I could stash an emergency $20 bill in there and a state ID, but I probably wouldn't ever put a credit card in there

Categories

Resources