i was previously flashing wiza 200 regularly w/out problems on windows vista.ystrday i tried to overclock it to a value 262 & after that it dsnt boot completely it comes to point where the windows screen appears and then it dsnt go further.i cant reflasht it again bcoz it dsnt connect to wmdc.i tried to downgrade to tmobile 2.26 with boot mode that 3 colors screen but no success bcoz process fails evrytime.z thr anyway to flash mobile without connecting thru wmdc?plz help
First of all...if you want proper help you need to speak properly....second have you tried a hard reset? and i couldn't really understand what the current condition of your phone is...so could you elaborate?
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
i need some serious help im desperate at this stage.
ive basically got a htc tytn ii on uk orange
i update the rom to htc standard one which sim locked it
i followed the instruction on how to get it like i got it from orange
which i believe was sucessful. but because it was still sim locked i
thought the hardspl was relocked so i ran that again which failed and ended up on the tri colour screen after which i tought it may still be hardspl locked
so i tried to flash it with the rom again it got to 17% then crashed
now my phone will only boot to the tricolour screen it wont load activesync and if i try a flash it with anyrom it either stays at 0% gets stuck or gets to 1% then the phone restarts.
ive buggered the phone up proper i need some help if there is any for this mess
when i try a rom upload it says error [294]: invalid vender id
this update utility cannot be used for your pda phoe please check your update utility
Did you install Hard SPL?
http://forum.xda-developers.com/showthread.php?t=334679
See if you can install that and then try to reinstall your rom.
this required activesync to be green mine will respond to usb but not activesynce so i cant go any further with the hardspl unlock im stuck on the tricolour screen. and flashing will only go to 1% then restart and the message come up again.
same problem
i have the same problem and i can only get to 1% . i have tried to flash it with several roms using diferent utilities and none seem to work i used hard spl the first time when it failed. HELP PLEASE !!!!!!!
found solution
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
worked a treat many thanks it is sim locked just have to wait for the sim unlock for it now
willbyrne said:
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
Click to expand...
Click to collapse
no worries
yeah no worries, i was affraid when i locked mine i might have to return it and get anothe orange version but i used some company online and got my code in about 3 days.
oh yeah you will probably need to enter the code in twice, mine said simlocked and then network locked but it was the same code
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
betacheer said:
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
Click to expand...
Click to collapse
do you mean bootloader (Tri-Coloured Sceen) Or the splash screen (Black Screen with touch diamond on it)?
I suggest you do a hard reset, and check this thread on how to easly back up ur programs, settings and manila config for future use using SASHIMI
http://forum.xda-developers.com/showthread.php?t=538513
Stuck in Bootloader screen
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
KenOslo said:
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
Click to expand...
Click to collapse
i think I am in same situation. phone is bricked :/
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Dom1n8tr1x said:
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Click to expand...
Click to collapse
each bootloader i have tried using the different hard spl version gets as far as the progress bar but fails at 0% with 262 connection error. tried about 6 different hard spl, signed unsigned olinex, customRUU. each of them all fail at 0% of progress bar.
will try it again today.
sorry betacheer for the hijack, but hope this helps you out in some way too.
Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl
grapher said:
Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl
Click to expand...
Click to collapse
Did you try going into bootloader first and then running the RUU.exe?
Or you can look HERE about making a Goldcard with Qmat (#6)
EDIT: Didn't see that you updated your post, congrats on gettin it workin again though