Stuck in Align Scree - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

after flashing wm 6 on my XDA II i cant pass the ALIGN SCREEN...it shows up again and again ...anybody know what to do?

guys help me

abdul.rafay7 said:
after flashing wm 6 on my XDA II i cant pass the ALIGN SCREEN...it shows up again and again ...anybody know what to do?
Click to expand...
Click to collapse
You can't flash a XDA II (i)!!! with roms from here. The i has got a different hardware.
In case you flashed a normal XDA II and got stuck it might be there had be something wrong with the rom, while you tried to translate. It happened to me while building my own rom too, so I skipped the touchscreen alignment at firstboot.
It's a known issue on translating roms.

i was talking about XDA II...

abdul.rafay7 said:
i was talking about XDA II...
Click to expand...
Click to collapse
Ok, carefully check. if there is a little bit of sand, wood or dust between the frame/chassis and the TS/display. There is permanent glue so it might be loosened by compressed air. Don´t be too rough!
In case you disassemble your device: Take care of the connection wires between TS and MB. The display should be moulded by some super thin double sided strips to the chassis. I should not be able to be moved sideways easyly! Good Luck!

thanx mate...i will try n report soon ....

Related

touch screen unresponsive

My touch screen has stopped working in Android. I can navigate with d button but can't use the screen. I've tried re-installing with the lastest nbh and the latest version of warm donut. but still the screen wont' register a touch. occassionally it does if the google search widget is installed. I might flash a windows rom to see if it's a hardware problem. Anyone have any other ideas?
Thanks!
jimbo42 said:
My touch screen has stopped working in Android. I can navigate with d button but can't use the screen. I've tried re-installing with the lastest nbh and the latest version of warm donut. but still the screen wont' register a touch. occassionally it does if the google search widget is installed. I might flash a windows rom to see if it's a hardware problem. Anyone have any other ideas?
Thanks!
Click to expand...
Click to collapse
Sounds like hardware issues to me.
jimbo42 said:
My touch screen has stopped working in Android. I can navigate with d button but can't use the screen. I've tried re-installing with the lastest nbh and the latest version of warm donut. but still the screen wont' register a touch. occassionally it does if the google search widget is installed. I might flash a windows rom to see if it's a hardware problem. Anyone have any other ideas?
Thanks!
Click to expand...
Click to collapse
Try going back to WM and see if it works.
indeed it is hardware
same problem with WM. guess it's time for a new phone. thanks for the responses.
Jumbo, you can still salvage the phone.... try this... take a duct tape and stick one end on the screen and gently lift the other end gently... enough relieve some pressure off the screen ( the digitizer)... keep a contant pressure OFF the screen for about 2-3 mins....
Then try the screen again... see if there is any response...
If that does not work
Get a exacto knife... and gently slide the exacto under the digitizer ( the plastic screen ) its about 1 mm thick... do this from the top and once you are able to grip the top, slowly lift this screen... about half and inch to an inch max from the top while keeping the bottom of the screen stuck because it has a connection you dont want to cut or disconnect otherwise you will have to open the HTC completely... take a clean soft cloth and swipe the inner screen ( dont put too much pressure on the lcd which is the glass screen fixed on the htc ... the digitizer however , which is the plastic screen you lifted off can be cleaned from the inside.
I had an unresponsive one as well and this is what i did and i revived my htc.... otherwise you can buy another digitizer off ebay with the tool but it looks complicated to open...
good luck...
a little disclaimer : dont hold me responsible if you screw up... this worked on mine and i was able to stick back the digitizer in its original place...i used alcohol to clean the inside, because my digitzer was always touching the lcd and it had an oily patch where it touch... must have been sweat or something and because i put it in my back pocket i must have had too much pressure on the screen
Sweet! There's hope! I'd love to have this little phone back and have it take me to the promised land of the HTC EVO. I'll try this out.
It lives!
Turns out taking off the screen protector and simply pulling up a bit on the corner of the lcd screen fixed it. Thanks, QkSi1ver!
jimbo42 said:
Turns out taking off the screen protector and simply pulling up a bit on the corner of the lcd screen fixed it. Thanks, QkSi1ver!
Click to expand...
Click to collapse
congratulations man! im glad you got it fixed
jimbo42 said:
Turns out taking off the screen protector and simply pulling up a bit on the corner of the lcd screen fixed it. Thanks, QkSi1ver!
Click to expand...
Click to collapse
np next time dont sit on it
jimbo42 said:
Turns out taking off the screen protector and simply pulling up a bit on the corner of the lcd screen fixed it. Thanks, QkSi1ver!
Click to expand...
Click to collapse
damnn i think thats whats wrong with mine
im only able to use half of my damn screen!
god i hope it works
inertone said:
damnn i think thats whats wrong with mine
im only able to use half of my damn screen!
god i hope it works
Click to expand...
Click to collapse
were you able to fix your phone?
inertone said:
damnn i think thats whats wrong with mine
im only able to use half of my damn screen!
god i hope it works
Click to expand...
Click to collapse
if your inner LCD ( the glass one) is not cracked like a glass and you can see the full LCD and that the only symptom is that you cant navigate using the screen, then its just because the digitizer is touching the LCD and screwing up the I/O...
The 2 easy fix is relatively safe and not much is required (Some old Duck Tape & Alcohol).. .than having to buy another digitizer and put it apart... something which i was not comfortable with even if i have the tool .
But as with any tinkering, be careful when you lift it up or put the exacto ( this when i tried it on mine i remember i was crossing my fingers (with my other hand of course ) so that i dont cut anything like wires or contacts underneath because i had no idea what i was getting into... but after doing it i can safely say, you can't screw it up as long as you dont use the exacto at the bottom end of the touch )
You only need the knife to lift it up a little and enough for you to grab it and life the top part up so that you can fit a cotton cloth underneadth to clean the inner side of the LCD and digitzer...
Funny,
I had the same problem after installing Android. Would up returning/swapping my Vogue.
I wonder if Android usage affects this in any way--even indirectly, e.g. Vogues weren't designed to take constant/large/sweeping finger presses, etc.
Any thoughts?
cp0020 said:
were you able to fix your phone?
Click to expand...
Click to collapse
not yet
i cant find ny damn exacto knife haha
inertone said:
not yet
i cant find ny damn exacto knife haha
Click to expand...
Click to collapse
lol good luck man, i hope you get it figured out. let me know if you get it
I would like to add that I had to replace my digitizer a few months back and it was actually quite easy to do and the digitizer itself was cheap ($10 on ebay).
Sadly, you are exactly right. No more back pocket, evar! Thanks again, so happy to have a live cell phone again...
I've had the rectangle oil looking patch for months now. I'm gonna try and fix it tonight. What keeps the plastic screen cover in place?
Reddog80p said:
I've had the rectangle oil looking patch for months now. I'm gonna try and fix it tonight. What keeps the plastic screen cover in place?
Click to expand...
Click to collapse
thats a warp in the screen
caused by overheating
inertone said:
thats a warp in the screen
caused by overheating
Click to expand...
Click to collapse
You sure? Is it unfixable?
EDIT: I put some duct tape on the screen cover and lifted it up and the oily rectangle went away but comes right back. I'll have to do some cleaning of the screen. Perhaps it is warped but removing the oily substance will help hopefully.

[BIG PROBLEM , SCREWED?]Screen Defect

Hello,
Well , I have a big problem with my SGS at the moment , the problem is that my screen is defect. Well , the screen still works as it should(touch , thank god) but I has alot of big scratches.
Believe it or not , but I dropped my sgs like 3 times before on 1 meter height on hard underground , It survived without scratches , btw I dont know if it did land on the screen so maybe thats the reason why my screen survived before. But today i was sitting and I had the phone in my pocket and when I wanted to stand up it dropped out of my pocket on the ground , from 0,5 meters height on a soft floor(carpet) but I discovered those big scratches and I was shocked
/Now the important part , is there any way to repair this???
By putting new glass on the screen or something? Maybe there is someone who experienced the same and knows how and where it got repaired?
Thanks in advance,
Picture of the state of my screen in attachments , sorry for the vga webcam quality.
Looks like the glass got shattered.
There would be no way to fix a Crack or a Scratch. You will have to replace the Digitizer and Display.
Dude, that's why you should use screen protector on it.
Sent from my GT-I9000 using XDA App
Jobiza said:
Dude, that's why you should use screen protector on it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for your help.
Sorry man. Some people just wouldn't use screen protector, but 1-5€ could have saved you from this.
Sent from my GT-I9000 using XDA App
'Defect' LOL. My car was 'defective' after I wrapped it around a telephone pole.
Would a screen protector prevent a shatter like that? Perhaps to a limited extent but I though they were mainly for scratches.
I do my SGS bareback. No significant scratches yet, I think last time I cleaned the screen up and looked really close I could see one tiny line.
I've dropped once onto pavement (dented the bezel) and once on a wood floor (flew out of my hand as I whipped it out and bounced across the room lol).
Jobiza said:
Sorry man. Some people just wouldn't use screen protector, but 1-5€ could have saved you from this.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i pay that for the insurance each month
Lol @ defect... as per above.. your screen has shattered
Sent via my Android powered Galaxy S
haloimplant said:
Would a screen protector prevent a shatter like that? Perhaps to a limited extent but I though they were mainly for scratches.
Click to expand...
Click to collapse
Yea , Thats what I thought. But no1 with a clue about my personal problem? Glass replace?
Second Sticky down, Accessories Forum.
Title: "i9000 Screen Replacement"
ImraanK said:
Lol @ defect... as per above.. your screen has shattered
Sent via my Android powered Galaxy S
Click to expand...
Click to collapse
Sorry sir , if your screen(or glass whatever)is shattered. In fact , its also defect. 1. a lack of something necessary for completeness or perfection; shortcoming; deficiency
But who cares?
Looks like these general subboard is full of trolls , I'm asking for advice where and how to repair your screen when its in a state like this? All I get is people who try to act smart or whatever you wanna call it.
Just dont post if you cant make sense
stateit said:
Second Sticky down, Accessories Forum.
Title: "i9000 Screen Replacement"
Click to expand...
Click to collapse
Thanks , never thought of looking @ assecories bord xD
You could try and replace it yourself which is probably cheaper or you can ring samsung and tell them what happened and have them replace it/send a new phone for you. Obviously it would cost you.
@dehem333
Very sad to hear that loss...
I have no idea how to fix it. But I pray that it gets fixed someway.
Wish u best of luck!
Sent from SGS-I9000 using Tapatalk Pro
You broke it...lol but who cares!!!
Screen with digitizers are for sale on ebay.. screen replacement thread in xda somewhere with phone disassembly vid(sure you would have found it by now)..
Better prep the sgs for icu .. good luck
Lol @ defect... as per above.. your screen has shattered
Sent via my Android powered Galaxy S
Click to expand...
Click to collapse
Sorry sir , if your screen(or glass whatever)is shattered. In fact , its also defect. 1. a lack of something necessary for completeness or perfection; shortcoming; deficiency
But who cares?
Looks like these general subboard is full of trolls , I'm asking for advice where and how to repair your screen when its in a state like this? All I get is people who try to act smart or whatever you wanna call it.
Just dont post if you cant make sense
Click to expand...
Click to collapse
Sent via my Android powered Galaxy S
Well just replacing the glass is not gonna work because the touch digitizer and the glass are like one. So you,ll have to buy it completely new. Also its not easy to replace it. Its glued together. Youll need to be handy.
If your buying off ebay make sure its an amoled screen. Alot of lcds on ebay.
Sent from my GT-I9000 using XDA Premium App

Incredible S disassembled

Hey guys
So i cracked my touch digitizer and decided to chance it myself.
I have taken some pictures of the phone disassembled.
So if anyone is curoius to see the inside of their phone, here it is...
If there is something you want a closer look of, just tell me and i will take a picture.
I haven't put it back together yet, cause i didn't know you needed some special tape to mount the digitizer...
Pretty neat. I rember taking my Nexus One apart. I got the digitizer and screen together. Didn't want to deal with the tape/glue aspect.
Sent from my HTC Incredible S using XDA Premium App
Great job!
I was in the same shoe as you. Mine was a badly cracked LCD while the touch screen didn't even have a single scratch. Don't ask how I did it
Dismantling the LCD and the touch screen assembly was the toughest part. Seems like all newer and slimmer phones are using glue to fix their parts together. A nightmare for DIY.
I used normal double sided tape to put mine back together. Seems to be holding well so far. However, I am still looking around for better alternatives. Let me know if you find one!
I love my INCS!
could you make close-up pics from the bottom leds that are being used?
im actually thinking of replacing them for blue or orange
Was it hard to do because I have some dust under my screen and maybe give it a try.
How did you manage to crack the gorilla glass??
Sent from my HTC Incredible S using XDA App
Yeah, i'm gonna try to replace my digitizer as well, i'm kinda scared to pull the screen & digitizer apart... I've read that you can heat it up using a hairdryer and that the glue will get loose, but i'm not sure if i have the guts to heat my screen up
So how did you manage to get the screen off?
Don't think it is worth the effort and risk to just get rid of a few dust particles.
Sent from my HTC Incredible S using XDA App
Guys, using a hairdryer f***s the phone up. You don' need lot of time to overheat any metal parts and circuits and stuff break...
You think it isnt that hot, but works the same way like when u are in the sauna and your necklace burns your neck when it hangs apart from your body for a couple of seconds.
Sent from my HTC Incredible S using XDA App
Hawkysoft said:
could you make close-up pics from the bottom leds that are being used?
im actually thinking of replacing them for blue or orange
Click to expand...
Click to collapse
I'm afraid i cant to that. I'm afraid of braking it when removing the tape wich is on it. The button "display" is 0,5 mm thick or so. Im not even sure it is possible to replace them.
Neolight78 said:
Was it hard to do because I have some dust under my screen and maybe give it a try.
Click to expand...
Click to collapse
Dont do it just to remove some dust. Not worth the risk. Its not that easy to take it off.
RicarduZonta said:
How did you manage to crack the gorilla glass??
Click to expand...
Click to collapse
6 feet drop on concrete floor with the corner first. Even Gorilla glas cant survive that
VaalNL said:
So how did you manage to get the screen off?
Click to expand...
Click to collapse
After removing everything on the back i was able to push at the back of the screen in the top of the phone, and then get a little plastick tool in and pulled it of.
Its quite hard to pull off but the glass was already cracked so i just pulled a bit hard.
I was a little bit more carefull with the LCD. Its also quite hard to remove. Just took my chances and hoped the glue would give in before the LCD craced
Cool story bro, I always wanted to know what's inside!
Can you post a high res picture of just the mother board particularly the NAND flash of possible
Sent from my HTC Incredible S using XDA Premium App
I'm also looking for what I need to re attach the digitizer. Any ideas
Sent from my HTC Incredible S using XDA App
What did you use to glue the digitizer back on? I broke mine and waiting for new digitizer and housing to come in. But i have no idea what is used to glue it back on. Also wondering if the digitizer gets glued back onto the lcd or onto the housing or both? Thanks guys!
hosecastro said:
What did you use to glue the digitizer back on? I broke mine and waiting for new digitizer and housing to come in. But i have no idea what is used to glue it back on. Also wondering if the digitizer gets glued back onto the lcd or onto the housing or both? Thanks guys!
Click to expand...
Click to collapse
Hey
I answered in the other thread
Sent from my HTC Incredible S using XDA App

stylus for galaxy mini

can any one suggest me a stylus for our mini??
u shud know that normal stylus' dont work on these touch screens
http://lmgtfy.com/?q=capacitive+stylus
you need a specific stylus for capacitive touchscreens.
look for it on ebay/flipkart.
Hmm...gotta buy one coz my brother lost his stylus for galaxy note..we could both share it or mayb look for a cheap deal for buyin two. Hehe
you don't need stylus bcoz ur finger acts as conductor & sensor detect it.
I checked out note's stylus a few days back.. It doesn't work on fit.
Sent from my GT-S5670 using xda premium
capacitive stylus
hey check this out .. i haven't personally tried it but logically it should work
i cant post a link cus im new but go to instructables.com and type (Poor Man's Capacitive Stylus) in the search ....
good luck
Devil33033 said:
hey check this out .. i haven't personally tried it but logically it should work
i cant post a link cus im new but go to instructables.com and type (Poor Man's Capacitive Stylus) in the search ....
good luck
Click to expand...
Click to collapse
Tried it. Working, but need use it carefully coz we can get scratches
Sent from my GT-S5570 using xda premium
ensoy said:
Tried it. Working, but need use it carefully coz we can get scratches
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
im glad it worked with you .. think im gonna try it my self .. and for the fear of scratches you can just simply apply a thick or a double screen protector on the screen
I've heard we can make it with a cotton bud, tissue, and few water.
Use a marker or sketch pen which has ink fully used and no ink left
"Home trick expert"
Just be careful on scratching men
cutedrummerboy said:
can any one suggest me a stylus for our mini??
Click to expand...
Click to collapse
Did you try Bamboo stylus before ?
You using bamboo stylus?

Dust under screen.

Sorry if this has been asked but im getting dust going beneath my screen and I need to wipe it. Is there any safe way to do this? And I can't really find any disassembly vids. Please help thanks.
zakkkkk said:
Sorry if this has been asked but im getting dust going beneath my screen and I need to wipe it. Is there any safe way to do this? And I can't really find any disassembly vids. Please help thanks.
Click to expand...
Click to collapse
Unfortunately today I also noticed small "pixels" of dust under my screen too. I do not think there is a way to clean it without opening the device. We should probably find a way to prevent that..
So still no one knows how to open the screen safely. Theres two star shaped screws on either side of the phone on the bezel, would that help to remove screen or am I going to risk breaking something? Please help.
bro if u take my advice dont do it yourself. I know how difficult it is to ignore it when u notice it.
By if u do it ur self u may put more of it then taking it out.
So if u really want it then take it to a preoffesional.
Sony repair quoted me 40 pounds. Id rather do it myself.
My rear camera totally scratch,when I hv take pictrue, photo blur any buddy suggests me.wat I di
Sent from my C5302 using xda app-developers app
Sanjay rao said:
My rear camera totally scratch,when I hv take pictrue, photo blur any buddy suggests me.wat I di
Sent from my C5302 using xda app-developers app
Click to expand...
Click to collapse
I hv got the same problem
1 guy suggested me to clean it with toothpaste aplied on earbud but it didnt help because i have got lotsa scratches
Maybe you can try that
I m also try this.no improvement.
Sent from my C5302 using xda app-developers app
Do I have to disassemble the whole phone from the back just to get to the front glass or is there an easier way?
Yes and as was previously suggested don't do it yourself you will just ruin the device of you are not an electronics engineer to put it back together as you found it. Its a tough job to reverse engineer electronic devices even those who are easily accessible imagine doing the same thing to your compact phone
Sent from my C5303 using xda app-developers app
zakkkkk said:
Sorry if this has been asked but im getting dust going beneath my screen and I need to wipe it. Is there any safe way to do this? And I can't really find any disassembly vids. Please help thanks.
Click to expand...
Click to collapse
The only way would be to disassemble the phone. The front digitiser is not glued to the LCD on this model as it is with other phones so it's not as hard as it may seem to get the dust out. Although you will need to completely disassemble the phone to get to the dust.
Disassembly instructions: http://forum.xda-developers.com/showthread.php?t=2518141
I have these PDF's downloaded so let me know if you need.
Braxley1 said:
The only way would be to disassemble the phone. The front digitiser is not glued to the LCD on this model as it is with other phones so it's not as hard as it may seem to get the dust out. Although you will need to completely disassemble the phone to get to the dust.
Disassembly instructions: http://forum.xda-developers.com/showthread.php?t=2518141
I have these PDF's downloaded so let me know if you need.
Click to expand...
Click to collapse
Will be needing the pdfs
dipesh1502 said:
Will be needing the pdfs
Click to expand...
Click to collapse
PM me an email to send to.
this may sound stupid but if you have a bike pump or air compressor use it to blow the dust out trough the micro usb port it may work and no disassembly required
Does anybody know if sony can clean the dust and does it come under the warranty?
zakkkkk said:
Does anybody know if sony can clean the dust and does it come under the warranty?
Click to expand...
Click to collapse
+1
My phone is a few more months under the warranty....
Gara91 said:
+1
My phone is a few more months under the warranty....
Click to expand...
Click to collapse
zakkkkk said:
Does anybody know if sony can clean the dust and does it come under the warranty?
Click to expand...
Click to collapse
In India they clean it under warranty, I got my screen dust free once from Sony center but after few months at present dust is back and now they are charging INR 350 (6$) for cleaning.
creative21 said:
In India they clean it under warranty, I got my screen dust free once from Sony center but after few months at present dust is back and now they are charging INR 350 (6$) for cleaning.
Click to expand...
Click to collapse
Hmm, there is no point if the dust will come again... Do you know how do they clean it?
Gara91 said:
Hmm, there is no point if the dust will come again... Do you know how do they clean it?
Click to expand...
Click to collapse
No, idk. I think that guy said to me that he opened whole phone. And now there is more dust then before it was. So opening phone will worse the case
creative21 said:
No, idk
Click to expand...
Click to collapse
Ok, thanks... Will see what to do... But it's very ugly, and i don't know how dust can even get between glass and lcd... :-B

Categories

Resources