Stranger no gsm - P3600 Software Upgrading

Good afternoon,
I have on my HTC:
IPL 0:50
SPL 1.20OLI
can make operating system updates and radio updates but it always appears NO GSM
I already had the SPL 1.30OLI and got install 1.20OLI.
appreciate help thanks

see here
http://forum.xda-developers.com/showthread.php?t=490681&page=3

Working + ou -
now my trinity is working the mensage NO GSM is gone, but some times de Phone frizes and i have to do a soft reset and apears again NO GSM, I "simulate" to do a Hard RESET and press softreset again and is working until it frizes again.
SORRY FOR MY INGLISH

Related

when even hardreset doesnt help... what now?

hello everybody,
i was stupid enough too change a running system... after i succesfully upgraded ROM and extended ROM with molskis versions, and everything still worked, i really did something very stupid... i applied an old spb-backup, hoping that this way i wouldnt have to do all the settings and applications again.
however, after a reboot, the following was shown:
ipl 2,21,0001
spl 2,21,0001
gsm 02,25,11
os 2,26,10,2
but after that, nothing else but white screen.
when i now try to hardreset bei holding the two buttons (connections and voice dial) nothing changes. i also removed the battery, just to have tried this option
now my question: does anybody have an idea?
or: what will it cost, to let this being repaired by o2? (my provider)
thanks in advance
boot into bootloader.. flash new ROM..
do a search on how to..
thanks a lot!
and i thought i'd have to send it to them
mille grazie
well did you get it fixed ?

Wizard Crash at Boot Please help

He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
try this
Firware an old rom back on the device prefrebly the one you ohone came with and make sure you phone is cid unlocked. Also have you tried a hard reset
Force bootloader mode!
Check this out!
http://forum.xda-developers.com/showthread.php?t=294107
That worked for me and others!
Good luck!
ghailoo said:
He I have a Qtek 9100 and I flashed it to Consam_Prophet_WM6_Crossbow_msyh_chs_beta2 Gives
IPL 2.26
SPL 2.26
GSM 02.47.11
OS 10.1.0.811
But now the thing doesn't want to boot any more please help
Click to expand...
Click to collapse
A couple of things to start with. First of all get you device back working. As mentioned by epimazzo above, force your device into bootloader and flash a stock ROM not a cooked one. Read the thread.
Once you have got your device working start reading before making any more rash decisions about upgrading to WM6 (especially when the file name hints that it is for a Prophet and not a Wizard). There is only one leaked Crossbow ROM for a Wizard. This has been cooked a few times (Orwell, PDAViet, Underground). There are many threads on the merrits of each ROM but you need to read read read before you end up with a brick.
Fixed Boot crash problem
Thank you Guys for all the help; I got it back running.
formatted : Push the network button and the voice button and reset then release the rest and you get the balck screen that has the press send button and that formats Wizard and then
Push the Power + Voice + Camera and I get the Red Green and White screen. quickly Update the ROM to the origunal one I have T-Mobile. It worked. You guys are the best. I found 5._Underground_edition_Crossbow_ROM But I was not able to flash it. I need to unlock the CID but I read that I would have to down grade the Wizard and then Unlock the CID. I am still looking for the old ROM.i think I found it. If anybody has a better way to Unlock the CID please tell me.
Thank you a Million tiles for all the Help guys.

[PROBLEM] MDA Vario(qtek 9100); flash ROM problem

hello,
yesterday i tried to flash my MDA Vario I ( Qtek 9100), but and today i it was "broken".
I still get in the Bootloadermode, so i tried to install/update a new ROM, it installs itself but nothing changes. And when i try to hard restet it, it doenst work, it says something like that " error can't formate". Is this a sign that my phone isnt CID unlocked, if yes the Lokiwiz.bat lied to me . The only think that changed with the updates where the SPL and IPL.
Ah before i forget i cant get passed the first Splash Screen, the one wich tells meh wich SPL and IPL version i have.
Hope you guys can help me. Thank you Thomme.
EDIT:
My SPL is: 3.08, IPL: 1.01
GSM: 02.47.11
OS: 1.5.4.2
my Splashscreen is: "a Beer in front of the Collosseum " I think some ROM changed it to that. :-/
EDIT2: Iam able to change the splash Screen but nothing else...
EDIT3: I send the phone back to tmobile, maybe i am lucky and they replace it, yes they replaced my Phone *yeahh * ...
go telekom!

no Gsm service IN wm5

i have weired problem,after upgrading to wm5 on my blueangel everything was ok,but i cant remember if i changed something or it happened by it self,the GSm service shows NO SERVICE,,,and the synchronization with the PC IS NOT WORKING ALSO,,,and whenever i try to hard reset it with the record and camera buttons ,when i press on the mail button nothing happens,,,as if i didnt press any thing......i tried to go back to 2003se,it worked fine,i used both radio versions 1.15 and 1.13 and the same on the wm5
i tried to reinstall the wm5 it reinstalled with the same problem and i noticed that my configurations r also the same!! and even the wall paper ,it seems that the settings sticks to the memory in some way ,,how can i delete it?how can i get rid of that?and install a new fresh copy of WM5 on it?
my device info now is 5.04.09
radio:1.13
and the surprise is no extRom version is Blank!
plz i need help with that....
what device do you have?
it's IMATE PDA2K
Have you tried to make soft reset? Is radio version showing up on reset?
The same situation. Everything was fine untill i upgraded to WM5 and then WM6. It seems that all files in ROM were saved cause on device start up all old applications are starting, such us XPshut and etc, but system gives can't find the file. the same applies to phoneservice.exe. the only thing which helps is to roll back to original 1.40 from imate.com. any solution?
if all apps from wm5 are there during startup, you didn't perform the reset + no/yes/yes + mail button routine, did you? the same thing when upgrading to wm5 from 2003se.

Is my K-Jam totally bricked?

Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat
Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!
boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !
zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.
ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma
could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh

Categories

Resources