I just got my second-hand X1 and i ran into a problem, my internet just can't be setup. I ran the automatic config. program a few times, it just says it has been successful and nothing changes, on every startup it offers itself but with no results. When i try to manually add a connection through network managment but the list is empty and when i try to press on new nothing happens.
When i go on Connection>Tasks, the list is empty :x ?
How do I fix this without flashing a new rom ?
You should contact your provider and ask for settings, another thing you can do is that u go to the connection setting and update the database your settings should be able to get choosed.
most providers got their setting on their site often as a pdf guide how to setup windows mobile devices correctly
Unfortuneatelly my doesn't
Seems like i gotta do some flashing
Well hard reset did the trick, oh well, now all i need to is install 10302 apps that i did before (i like my phone pimped out )
Related
I removed O2active according to this thread http://forum.xda-developers.com/viewtopic.php?t=33687. Now a few things are going wrong with my XdaIIi. I have no more connetions - my phone shows no service, and the option to turn on wi-fi is no longer present when I touch the atenna icon at the top. Also if I go into WLAN, everything is greyed out.
ALSO - my unit just resets itself approxiamtely every 20 min, for no apparent reason. This is really frustrating - any suggestions?
Hard reset your phone. When the 2i asks what type of user you are, select corporate and enter the code 0506. Download and install the O2 settins cab which can be found in the networking forum.
If you have a look around you will also find a ROM update with the O2 stuff stripped out. This has the updated radio stack with it too. You will still need to install the settings cab though.
Don't forget to back up your contacts and personal files first though.
Good luck,
Pug.
Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
hi, i have the same problem...but I still using the standard ATT rom...
ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..
I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.
hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.
I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?
Iam using Activesync 4.5..
Have you tried disabling your windows firewall?
Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers
Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.
I have worked in IT support for 8 years at the desktop support level. I dont understand all but can usually figure things out. I apologies in advance for being a rookie. I am frustrated with this device and need help!!
I upgraded ATT tilt to Dutty 6.1 Build 19700.duttys 6.1 about 1 month ago and Since I did this I have had a lot of problems. Build has all the goodies and more but since the upgrade I cant get any work done because I am always tweaking in an attempt to get the device working properly. I have tried to reset and reflash sevral times to start all over again but I end up with the same issues.
1. Unable to sync with active sync. I have disabled avast anti and I still am unable to sync. I also added port 990 to firewall and no good. I have re-installed active Sync 5 times. It only works when I play with it and then the device does not stay connected. It boots the connection 1 or 2 minutes after sync
2. No email apps or programs work. I tried the java versions and all. Messaging says error synchronizing and gives this message - "cannot cannect with current connection settings. To change your connection settings tap settings" My settings are OK as far as I can see. I purposely connect to media net before opening email to make sure the data connection is present. I had full blown HSDPA in NY city yesterday and no email or GPS working.
3. GPS and GPS upgrade is not working. Does GPS use its own radio? Does dutty upgrade break the radio? Not sure what is happening here as well.
4. No you tube video as usual. This has always been broken and remains broken for me. I tried installing flash bundle, codecs, etc.... No good.
I constantly get prompted the below
"cannot cannect with current connection settings. To change your connection settings tap settings"
Only thing that works is web browser.
Can someone please point me to a good solid working and mostly complete ROM for the US att tilt "kaiser". Maybe this is all I need. I have trouble finding ROM info and whether its current via the site. It gets confusing and I just want to set up once and forget, if you know what I mean. Please provide any links I might need to a fix, rom, tweak, etc..
Please help!
Steve
Steve, I updated to Dutty's ROM a while ago and all worked well until about a couple of weeks ago. I do not attribute my problems to the ROM though but rather the Tilt itself. My first issue was related to no activesync connectivity. My Tilt became an "unknown" device. Looking at my USB port from inside of the battery compartment notice bent pins. I was able to straighten the pins out but only could connect with one of about 10 USB cables that I had around. Once you have loaded Dutty's room I would recommend reconfiguring your connectivity to AT&T. You can download a CAB with all of the configuration setting on this board. Recently my touch screen would freeze up and not work well. I thought it might be the ROM but later found out there must have been some physical problem. Two days ago I called ATT and RMA'd my phone. I recieved the new phone yesterday and configured it last night. All is working well (USB and Touchscreen, new ROM, New SPL and new radio).
BTW last night saw (do a google search - I don't remember where I saw it) a revised video / flash version of TCXXXX software. With Dutty's ROM (and current) my GPS worked great. I use it with a couple of test GPS programs and TomTom on Com4. I also have an external BT GPS and it works well with that. Check to make sure your email is not configured for a proxy or local network connection.
Pete
Thanks Pete, Since this post I have gotten the GPS to work. There is a GPS app in programs\tools that has an enable option. I stumbled across it looking for answers. Ill check the pins on my cable as well.
Dutty's connections wizard actually had the wrong info for ATT america. I had to remove ID and password to get it working for Media Net so I hope the cab you reference is a newer one than is on my tilt.
I am still getting the same message for email. "cannot cannect with current connection settings. To change your connection settings tap settings"
I have to be missing something in the connection settings. I will try the cab, maybe it has been updated since Dutty's build.
Can you think of any thing in the connection settings?? Opera works but email gets error and message to check connections.
Ill let you know how that works.
Here are the essential 3 cab files you need for your Tilt.
1) fixes keyboard
-Install, soft reset, done
2) Sets At&t settings
-install, set up email but do not save your password
then do this
start>settings>connections>connections>advanced>select networks>change both drop downs to media net>click edit on both drop downs and go to proxy settings here you will uncheck everything. remember to do it to both dropdowns.
3) removes hidden proxy (which will allow your email to work if you are using a saved password)
-install, then go to your email set up and save your password.
edit: This will also allow you to update htc weather, quickgps, and a number of other programs without receiving errors.
good luck and have a nice day
I ran through the guide of setting up the new radio and ROM for my phone, all went well and everything was applied successfully (RUU_Kaiser_HyperDragon_III_Raphael_WWE_20081225 AND KAIS_Radinly_1.70.19.09) but now the phone won't lock onto my network (T-Mobile in the UK). It locks, momentarily, then loses the connection and starts searching again. I've tried leaving the network selection on automatic, and also setting it manually to t-mobile UK, but in both scenarios it does exactly the same.
Can anyone suggest what is going wrong and how to fix it?
Just to elaborate on the new ROM I've installed:
1) My device no longer connects to T-Mobile UK on anything other than GSM - so no 3G, HSDPA etc. Any idea what I do to fix this?
2) I can access the Internet via Opera, IE, RSS etc. yet when I do send/receive in the email it fails to connect to the Internet without even appearing to try and connect. Im not sure what is causing this or how to fix it?
3) I dont seem to be able to lock on to a satellite - is this becuase QuickGPS isn't installed to assist the lock?
Have you tried the 'Connection Setup' wizzard under settings/connections?
A soft reset after that always works for me?
brandall said:
Have you tried the 'Connection Setup' wizzard under settings/connections?
A soft reset after that always works for me?
Click to expand...
Click to collapse
Yes, gone through that process and soft reset several times. I can browse the web with opera and/or IE, and the RSS reader is working too, but the email wont work at all. I've set two different accounts (a POP and a GMail IMAP) and both do the same
Making some headway here now on these....
The GPS did connect - albeit VERY slowly. Is QuickGPS free to download somewhere to speed things up?
Got the email working - looks like there may be a proxy bug in the Rom i'm using as it kept resetting itself all the time when I closed the proxy settings dialog. Seems OK now though.
Still no luck on the high-speed internet connection though
Did you remember to do a hard reset immediately after flashing (i.e. at the point where you are invited to tap the screen to begin).
Sounds like a bad flash or a radio problem.
Yep, did hard reset becuase I had to look up on the wiki which keys to press
Hi guys, I am posting here just to solve one issue of my father's diamond.
I have one raphael, my father got a diamond, and it is different on provider informations.
My raphael automatically detects the provider's configuration, installing it on connections, I tryied it with my father's diamond, and his diamond doesnt take the provider's information, I dont know why. So, I have just configured it by my hand manually, using the necessary informations, all ok, it worked fine, he can work on internet, but the problem is that all times he power on his phone, come the warning that is trying to take provider's information, and automatically goes to the connections on settings tab, its a warning, I think that the cell phone doesnt detect that it is manually typed, and try again with a global icon on hardware's tasks.
Once I have already configured it, I would like to KILL this warning, he is a big disapointed with it, that appears sometimes.
Thanks for now
Hi....first of all...I am not an expert! I think the solution might be to go to 1) Settings......2)Connections and click on the connection setup symbol, (if you have it) this should set it up for you.....hope this helps
It the PDA goes automatically, but always repeat when i power on the phone
the last answer:flash the other rom
I will find it, but I dont know if I is easy to locate the portuguese rom as it is installed on his fone