I really like to use Igo8 as it has one of the best UI but I always come accross this nagging problem. I have setup pin lock after 5 min. and Igo8 is not able to overide this when in use. So i have to disable pin before using Igo8 which is kind of annoying. Is there anyway of making the program to run uninterrupted by lock screen. Thanks
Related
More shortly, has bothered me touch a cube, and here scrolling worthy alternative I have not found it. Here has decided to leave only scrolling.
It is simple HTC Scrolling (the library is taken from the latest insertion Elf).
Only for WM6.
Now also with a sound.
Can anyone report that this cab works?
I checked, works as in HTC Touch.
well...it crashed my Hermes and i need to hard reset it....=_=
berwick said:
well...it crashed my Hermes and i need to hard reset it....=_=
Click to expand...
Click to collapse
I tested on Herald
Aserg it works with wizard thanks. But the touch scroll feeling is not as good as it is in touch enabled rom.
Thanks, i made thread for you in the wizard forum do check HERE
How to increase sensitivity of the screen? It is possible to try to change value in the register, for example, up to 3000:
HKEY_LOCAL_MACHINE \Drivers \TouchPanel \ PressureThreshold = 9812
If you will pick up correct value, it is possible to make separate cab for wizard
For wizard try with such value if sensitivity will be good I shall make separate cab.
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:2dc1
Can someone describe what exacly it does?? Is this app work like efrost's FTouchFlo???
It is taken from HTC TouchFlo.
Works on HTC Artemis (o2 Orbit)
Increase in sensitivity TouchPanel (It would be good to pick up for each device):
thanks very much now where can i find a rom without touch setting? seems all of th eroms that have been release is touch based
i crossed my fingers and try'it on my HTC Titan. And it did not work. touch screen stop working, so i remove the app and all was normal after. well was nice to try ;-)
Now also with a sound.
Thank you so much for this. Seems to work perfectly on my wing.
It would be good to leave here the responses. The information would be very useful to others.
ASerg, with sound it is working much better.Thanks Again.
ASerg said:
It would be good to leave here the responses. The information would be very useful to others.
Click to expand...
Click to collapse
Well... Tried it on my Herald (the last version with the sound). Didn`t like it - it`s too slow, i mean the reaction of the prog for the finger scrolling. Also, sometimes, it confuses scrolling directions and starts up really late (like 2-3 sec after opening and start scrolling Contacts, i.e.). But I liked the sound, it`s very useful for blind scrolling - in car, i.e..
Deleted, and went back to FtouchFlo.
How to uninstall it
Hello,
I'm using SPB Pocket Plus for scrolling and it does not work very well with your "HTC Scrolling" application.
It is possible to uninstall it ? If so - how ?
It's been discussed a lot in the release but has anybody actually found a fix that will let you use iGO when HTC Home screen is enabled? To use iGO, i have to remove the plugin, uninstall, and reinstall--what a pain. Anybody find a fix?
kareem9nba said:
It's been discussed a lot in the release but has anybody actually found a fix that will let you use iGO when HTC Home screen is enabled? To use iGO, i have to remove the plugin, uninstall, and reinstall--what a pain. Anybody find a fix?
Click to expand...
Click to collapse
If you can't use Igo with HTC home enable, then just disable it. Run Igo, and close it. Then enable back HTC home, now you should able to run Igo without disable HTC home. Hope this help, it works for me.
Igo runs without disable htc home with Dutty's latest rom.
Hi,
Has anyone got the s2u2 Slide to Answer feature working?
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
If you press the screen, it seems that the TouchFlo is getting priority, as the Answer or Ignore buttons will work, even if they aren't actually being displayed.
Anyone managed to get this working properly?
I'm using S2U2 version 1.03.
Thanks for any suggestions.
Regards,
Ben
ben_gb said:
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
Click to expand...
Click to collapse
lol
That sounds like fun.
I suppose you can disable TouchFLO 3D, although you probably don't want to do that. You might be able to stop TouchFLO 3D from handling calls with a registry edit, although I doubt it...
I have the same problem. After several tries, I found two solutions. The first one is using AdvanceConfig to disable 'phone skin', after restart, s2u2 works properly. But the dialpad is no longer the diamond style. The second one is to install another dialpad to replace the existing diamond dialpad.
But i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
So can you still utilize all the other S2U2 goodness besides S2A feature? If so, I'd happily turn off S2A and keep all else. Though a proper solution would also be the preference.
yes, other functions work in a good condition
i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
has someone found a solution?
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
bin862cn said:
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
Click to expand...
Click to collapse
how could you block the touch function when there is an incoming call?
ageye said:
how could you block the touch function when there is an incoming call?
Click to expand...
Click to collapse
I'd like this answer too, i love so much s2a and the other functions but i love the classical tflo dial pad(i'm a little bit confused about all the tweaking and installing out the box apps that may get in conflict with others!)
However i still think that Diamond will be a superphone in one month or two with all the geniuses around here
There is another thread with exactly this issues. If you have managed to block the touch screen and just allow the hard keys, how did you do it?
up up.
Does anyone found a solution? My S2U2 worked great, untill this morning.....Now I have the same problem.
How can help.....
You can keep touchflo3d dial pad with S2U2, just have to edit registry "HKLM\Software\HTC\Biotouch" make a new Key called "Disable4SpecificApp", and inside this another one called "S2U2", inside this a new string wich "value name" is "classname" and its "value data" is "S2U2"
I have an AT&T Tilt with the stock 6.1 ROM. I use S2U2 as well as HTC Home and Mobile Shell. My problem is that the phone will go back to the S2U2 screen after about 15 seconds. I have the timeout in S2U2 set for 60 secs, but it will tieout even when I'm scrolling through the contacts. Has anyone else had this problem and how do I fix it.
Thanks
Andy
amac64 said:
I have an AT&T Tilt with the stock 6.1 ROM. I use S2U2 as well as HTC Home and Mobile Shell. My problem is that the phone will go back to the S2U2 screen after about 15 seconds. I have the timeout in S2U2 set for 60 secs, but it will tieout even when I'm scrolling through the contacts. Has anyone else had this problem and how do I fix it.
Thanks
Andy
Click to expand...
Click to collapse
that happened to me all the time when i had s2u2 on phone. What you need to do is change the setting and reset phone. If still this doesn't help than post your problem in the s2u2 thread in the development and hacking forum under the general main forum. This way the guy you created s2u2 can help you or many other users who use the program can give assistance.
hope this helps.
I have some programs locked on the Programs screen on my touch pro. Is there anyway to remove these. I have alltel and could care less about the RSS reader or their ringtone download crap and the 5 or 6 other locked programs on the program screen. Any help would be appreciated.
Diamon TF3D Config program. There is an option there to remove the lock. Look around and you will find it.