Just lost touch sensitivity on the screen yesterday eve. At times forced feedback for fingers is there(home clock) but as most of the buttons are small meant for the stylus its impossible to do anything. All I can say its not completely dead there is minor sensitivity along the edges.
Any idea what could be the problem? Need to take a call if i should get a new phone or just repair it. I doubt it to be a software issue which might need a hardboot and format as both soft reboot and unplugging the battery directly doesn't help.
Please help.
Same problem, some months ago...
I sent my diamond in a HTC support center, and they asked my about 230 € for repair the touch...
The solution was buy a new diamond...
Related
I was tapping away happily on my little used XDA2i and suddenly the touchscreen stopped working. There is no damage to it and I tried to soft and hard reset and nothing works.
Now I am at the opening screen after hard reset and it looks like the touchscreen is kippered.
Any ideas of a cheap mending solution?
Just to clarify - the display works fine it just doesnt respond to touch.
bushako
dude...i think the connectors must have gotten out of place from the motherboard...a simple solution is to go and hand it over 2 da nearest phone repair shop and i doubt it would be cheap so just find a way to open the pda(which is very very very simple and easy) and i have done that a hundred times and the xda2i still works perfectly..one of da reason why i love it soooo much,lol...anyways...the connectors are visible ones you get to open the back panel and see for yourself...
I have just got an XDA 2i. i got it very cheap in a not working state and the problem was as you described. The machine would power up but not accept input from the touch screen. I disassembled it, cleaned it up and rebuilt it and it now works fine. I assumed it was the connector for the touch screen. The job was quite simple but i am fairly technically competent. A replacement screen can be found on Ebay for as little as £14 GBP.
Ok, I have had this to pieces and also dismantled the screen to see what the problem might be, gave everything a wiggle and then rebuilt the machine.
Touchscreen still not working though the LCD still seems fine and so i am assuming that I haven't broken it.
Not sure what to do next as I cant find any XDA 2i touchscreens on fleabay. Anyone had exactly this problem and replaced only the touchscreen (not the LCD too) and could give me some tips. I couldnt see how to replace just the touchscreen ie where it would connect to the mainboard. Also - Stev - when you said you cleaned it - do you mean you actually cleaned the touchscreen part or the machine generally.
Thanks
Touch screen problem with no alignment
Have got 2 Qtek 2020i with defective touchscreens.After hard reset they get to the "align screen" image, and the PDA responds to the touch by moving the cursor between the 5 adjustment points - but alignment seemingly never occurs, as I can continue forever.I guess the touch screen in itself got misaligned - anyone with experience in this ? .I found replacement touch screens from Hong Kong for as little as $6.99/pc, and $2,50 for shipment to Denmark.
I have bought a replacement touchscreen from ebay, however it looks like it needs soldering at the back and the ribbon on the screen is a different layout. Anyone have any idea what to connect and to where?
Does anyone know whether the touch panel from XDA II will be able to fix to XDA IIi ? I am having problem with my XDA IIi(Alpine) it seems the touchscreen is not responsive. I have already tried opening the Alpine check the connectors it seems to be okay so i am suspecting the touch screen is the fault. I have found this website http://mobile.brando.com.hk/TouchScreenO2xdaII.php selling the replacement touchscreen but it stated there XDA II. Will it be a match for Xda IIi? Will it be easy to fix? Anyone with experience please help. Thanks.
I bought one on ebay for £12.98 that said XDA 2i and it looks like the one in your picture, which I dont think is the right one - I reckon that is the XDA 2 one version. I phoned the company I bought it from, in London and they said if I send the whole lot to them they will fit the new screen for £20 more which seems fair enough. That would mean the touchscreen fitted for £32 - a lot less than the £80-100 I've seen elsewhere.
Have got a strange issue with my diamond
touch screen is not working, it seems to be tottaly out of alignment
have tried calibrating again, but the calibration tool just loops around and around, and doesnt complete
i had this issue the other day but was fixed after calibrating the screen
any ideas what it the fix is, or should i send to htc to repai under warranty
i have tried searching for an answer, but cant find anyone who has had similar issue
Digitizer issue?
maybe have a look at this
http://forum.xda-developers.com/showthread.php?t=412159&highlight=digitizer
Hi,
I am in the UK and found my touch screen started responding on the other side of the device, then it wouldn't respond at all.
It was pretty much all over the place until I called them up.
They sent a courier, collected the phone on the Thursday, returned it Wednesday so 5 day turnaround collecting and returning to my home.
I would strongly suggest going through them
re
i heawe same problems with touch,bath only fix in service ,it takes 2 weaks 2 repeair ....g.b.
A refresher - I had the same problem, but it turned out to be very simple to fix - dust around the screen.....
It is possible that between the screen and the cover there will sneak some dust and other particles. They will exert the pressure over the screen, fooling the touch-sensor. You need something thin and preferably firm (like bit of plastic screen) and go around the screen - GENTLY - there's electronics inside!
I did it, and all returned to normal... And I was scared that I will be forced through the whole "servicing" proces....
Anyway - worked for me!
Hello
I have a diamond htc rom 1.93.412.1ESN since I bought the unit come with serious problems with the display on the screen of alignment "Alinear pantalla" in system menu. Who here has or has the same problem, I already hard reset several times but not resolved, will defect in the unit? can you help me?
* Forgiveness by basic English, I am Chilean living in brazil
are you having a similar problem to this?
http://forum.xda-developers.com/showthread.php?t=438733
i've got the same problem.
When i align my screen it's ok buth 1 hr later when i put my stylus at the lower half of the screen its perfectly ok buth whe i put it at the top the presspoint is allways 1/2 a cm higher then my stylus.
so i have to do it several times a day
That is defect, I had that problem with my 2nd diamond. I tried several different ROM but the problem still there. So I returned it and get a replacement. My new one is perfect.
i had the same problem, i phoned htc who advised flashing with a orange uk, rom, then send to them if it didnt work
flashed it, same problem, so sent it in
just got an email, saying the warranty is void due to the rom being flashed
has anyone got a repair report for this issue
as my only recourse now is to get them to repair under the sales of goods act , as this is a hardware fault and their liability to fix
it is down to them to prove it was not inherantly faulty at the time of sale, but would like as much info as i can get to show that this is a hardware issue that has been experiance by other users
Hello there community,
A few days ago my touchscreen just stopped working on my Touch Diamond, i tried everything to get it to work...
Updated rom with new firmware from the HTC website, did a soft rest, hard reset but it did not help
I hope maybe someone here had the same problem and solution for this, otherwise i have to RMA the device.
Thnx for any help
Hi Xnergy, have you got your Diamond repaired?
I am having the same problem on mine...
I had this also.
I did removed a battery for a whole day, like 24 hours, after that it works again!
Do the hard buttons work? I had something like this few times, as far as I remeber after removing battery for a moment it worked.
This happened to me in a few weeks ago. The touch screen either would not response, or that the alignment needed to be adjusted a few times a day. In the end, I send it in to the HTC service centre on 30th March. They replaced the whole touch screen, and courier it back to my office on 3rd April. The touch screen is working like brand new now.
yeh mine did this but i noticed tht if i keep the phones touchscreen worm abit it will function ok, gunna send it in to coz its starting to drive me up the wall
Hello, last time i bought HTC Diamond. The problem is that i need align screen too often. Sometimes it can work properly very long time but sometimes i need align screen few times in 15 minutes. I don't have guarantee for this phone no more. Anybody know how to solve this issue? Thank you.
I have got the same problem; my htc diamond lost the calbration after few clicks. One member of this forum said that I have to change the digitizer
Have a look to my post.
no solution for this, buy new display, and chage it... You can find it on ebay and they will send you display and other tools which you need for replacing display...
Yup I had the same problem and got the screen replaced. A lot of people have reported this.
If your phone is under warranty you can get the screen replaced for free.