Hello my p3600 has a big problem the screen on the right side from top to bottom its not calibrated.
I already calibrated it with the calibrating tool but it works only temporarily (ween it works)...
I was wondering if any of you people had a similar problem and what did you do to fix it?
I have a Qtek s100 that the sound and microphone stopped working can any one tell me if the screens are the same? (maybe i can exchange them)
priestnot said:
Hello my p3600 has a big problem the screen on the right side from top to bottom its not calibrated.
I already calibrated it with the calibrating tool but it works only temporarily (ween it works)...
I was wondering if any of you people had a similar problem and what did you do to fix it?
I have a Qtek s100 that the sound and microphone stopped working can any one tell me if the screens are the same? (maybe i can exchange them)
Click to expand...
Click to collapse
no man the screens are very diferent. try to dissasemble the trinity clean the all borders of the LCD.... and try.. :-(
i have the same problem, and thte htc is clean. anubody as a solution for this problem?
Seams that nobody has the solution...
Iam going to open mine and try to see if some sort of cleaning to do
i had the similar situation, but i did some tests before i bought that one...
after their fail i find a better model.
but if you already have phone with that problem check if they have and plastic on lcd. it might be sth. with this.
Related
So here is my story.. i have a perfectly working kaiser, and one with a broken lcd.. but both of them are in terrible cosmetic condition.. so i decide to order from ebay a full housing (with keyboard included) to make it look good and give it to my brother as a present..
I perfectly disassemble the device with the working screen and easily install it in the new housing.. but when i turn it on i realise that the only working hardware keyboard buttons were q e u o f h l and some arrows i think...
My first conclusion was that the keyboard included in the housing was not working correctly so i decide to use my old one. but to my surprise the old keyboard also has only the same working buttons!!!
after that i also tried the keyboard from my other kaiser ( with the broken screen) with the same results.
So up to this point, i guess it is safe to assume that the keyboards have no problem.. but then the mystery grows cause i exchanged every single piece of the phone with the broken kaiser's parts and the problem remains the same...
Any idea?? i am an engineer and problems like that that i cannot think of a reason that they are happening drive me nuts!!! please help me sleep at nights..
thanx in advance!
Hooray! Someone else who has the exact same problem as me! The phone I have had the LCD screen replaced and once it was reassembled, the keyboard is wacky. I tried reseating it and the same keys you mention are the only ones working: Q E U O F H L, CAP/Shift, Tab, Space, Enter and the 4 arrow keys. Nothing else works. I'd love to see if anyone has a solution to our problem. =)
Also, I'm not sure if it does it for you but the backlighting doesn't turn back on once it goes off - even when pressing the working keys. I found other posts on this forum with similar problems (with no replies) but their keyboards were not working at all. There has to be a simple solution that we're missing if it's this common.
Thats really weird that we have the same keys working... it really has to be something we are missing... but i have changed everything..
the only thing i didnt change is the lcd, so now that you are telling me that this happened only after you changed the lcd, it got me thinking that maybe the lcd is not as inocent as it may seem... cause,ok, my first thought was like wtf the lcd couldnt mess up with the keyboard.. but now that i think about it it is the only thing i havent tried to replace.. i have a broken one but still quite operative, so i will try with this one and get back at you.. if in the meanwhile anyone else knows something or has an idea, please help a little bit!
Like you, I cannot find any reason between the keyboard and the screen that would cause this. They're not connected in any way or share any cables. They connect to different parts of the main board... there's no logic that I can find.
I got mine second-hand and the original owner said she had the LCD replaced because of a couple dead pixels. The keyboard was working fine before that. Let me know what you find out. I was planning on ordering a replacement keyboard assembly from eBay but since you've tried a couple, that saves me from wasting that money.
Unfortunatelly the extra LCD i had was not operating at all, so the test i wanted to do failed, and i still dont know whats causing the problem... i am more or less convinced that i have to buy a new lcd but it is a bit of a risk to change the screen because some buttons on the keyboard dont work, dont you think?? anyway i am wondering y nobody else has nothing to say... this hasnt happened to anyone else??
ilias_alk said:
Unfortunatelly the extra LCD i had was not operating at all, so the test i wanted to do failed, and i still dont know whats causing the problem... i am more or less convinced that i have to buy a new lcd but it is a bit of a risk to change the screen because some buttons on the keyboard dont work, dont you think?? anyway i am wondering y nobody else has nothing to say... this hasnt happened to anyone else??
Click to expand...
Click to collapse
Hey, why do not you try endkey replacement, you can read and download it at http://forum.xda-developers.com/showthread.php?t=704631
Hakim Rahman said:
Hey, why do not you try endkey replacement, you can read and download it at http://forum.xda-developers.com/showthread.php?t=704631
Click to expand...
Click to collapse
thank you for your reply! but i don't understand how this would help for our problems..
i talked with htc yesterday and they told me it couldnt be the lcd, but during the lcd replacement probably the flexiboard was a little torned (needs a microscope to be verified..) i am giving it for a free test on monday so i guess i l have a more detailed answer soon!!
ilias_alk said:
thank you for your reply! but i don't understand how this would help for our problems..
i talked with htc yesterday and they told me it couldnt be the lcd, but during the lcd replacement probably the flexiboard was a little torned (needs a microscope to be verified..) i am giving it for a free test on monday so i guess i l have a more detailed answer soon!!
Click to expand...
Click to collapse
Hmm, that's an interesting find. It's odd that the same problem exists on different phones, unless it's a common section/piece of the board/assembly that gets damaged. Are you going to try and use the assembly from your other phone? Let me know what happens. I'd like to know what piece I need to buy to get mine working again. =)
I've been searching for internet for weeks and i still coudn't find the solution for this thing ..... my screen scrambles and jumbles everytime i connect to the internet using 3g....3dge.. etc but not wifi
here is my phone's background:
when i purchased it it has no problems at all...
after 1 and half years due to daily use keypad gets hard to press and the screen has a lot of scratches casing too..
so i decided to change the case of the xperia an the tft resistive touchscreen and clean the whole thing..
after putting it all back together it runs fine... checking the landscape camera wifi etc..
i decided to change rom because i think i could make it so new that even the os is changed...
i follow the basic process and it work fine..
after a week i notice that when i connect to the internet 3g... it jumbles the pixels of the screen in the upper part of the x1 even on landscape mode.. it is still there....
i searched the internet and i found old questions never been answered;;
http://www.xperiax1.net/x1-problems-issues/1735-youtube-videos-scrambled.html
http://forum.xda-developers.com/showthread.php?t=735531
somehow related to connecting 3gs..
i never change to 6.1 because of it's lack of features..
ive change 6.5 roms but the problem is still there....
here is a sample picture:
http://www.glowfoto.com/static_image/27-005937L/9102/jpg/11/2010/img6/glowfoto
can somebody... please.... im begging you.... explain these problem with me and how can i solve it....???? PLEASE..... I APPRECIATE YOUR REPLY OR RESPONSE PLEASE!!!! thank you and God Bless!!!
PLEASE THANK YOU.... I REALLY LOVE MY OLD PHONE... I DON'T WANT TO BUY ONE...
dude, seriously. no one answered? it's very common tiling issues. yours just happend due the notification icons animation. most probable cause is vga driver. search for alternative driver.
No idea dude. But you may try to reflash your X1 to other ROM. I had been facing almost similar connection problem, but mine, the WiFi is undetectable. So I try to reflash my ROM with other ROM. Fortunately, it's working back.
this might be some app problem rather than rom/driver issue although some rom/driver handle it better. i just experience the exact issue after installing weather4me app. disabling refresh(update weather) during startup solved mine. maybe there's background app/process that doing something similiar causing it.
I see 3 possible reasons for this behavior:
- the displaydriver of the 6.5-rom is not really compatible to the hardware.
To check this you can flash the original rom and test if everything works.
- the radio interferes the communication between display and board.
This can happen when the device is not reassembled as original
(broken/removed shielding, dust/dirt in connectors while reconnecting,...).
To check this you have to reassemble the phone again.
- damaged hardware thru electrostatic discharge when touching the electronics.
Unfortunately this can not be checked or repaired. You can only guess if this is a possible reason by answering this questions to you:
- did you wear part-synthetic clothes while working on the electronics ?
(this forces electrostatic charge)
- did you discharge "yourself" every some minutes by touching a grounded point ?
- did you lay the electronics on a plastic ground ?
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
Hello guys! Saddly for me my touchscreen stopped working but the thing is that i bought a new screen assembly but i still have the same problem and the same spot doesnt work (on the digitzer, lcd works perfectly). I really dont know what to do i have tried to google my problem but people always solve there problem by replacing the screen and i did the samething and still nothing. I'm running the latest stock rom from at&t now but i have tried to flash viper rom and cleamrom, etc... but i have gotten the same result
i tought that it could be the digitzer connector on the motherboard but it looks new so i cant find the problem...
To be more specific the spot thats shown on the image does work but when i touch it, it shows that iam using 2 fingers when iam only using 1 its really anoying when i use the keyboard. When i touch that spot, the phone starts to select things arround the "dead" spot.
My apologies if i have made some dumb mistakes in the text, i'm from belgium so english isnt my mother laguage.
IF theres no liquid damage.
The phone was working just fine, then mysteriously stopped working in one spot. I would guess replace digitizer (aka glass) But if replacing glass has yielded the same result. Now it gets tricky. Now its either a board level issue or a problem with the Kernel interfacing with its hardware.
Since not a stock device and has been rooted with custom ROM its possible those software mods might have affected it.
My suggestion is do your best to go back to completely stock and hope for the best.
IAmSixNine said:
IF theres no liquid damage.
The phone was working just fine, then mysteriously stopped working in one spot. I would guess replace digitizer (aka glass) But if replacing glass has yielded the same result. Now it gets tricky. Now its either a board level issue or a problem with the Kernel interfacing with its hardware.
Since not a stock device and has been rooted with custom ROM its possible those software mods might have affected it.
My suggestion is do your best to go back to completely stock and hope for the best.
Click to expand...
Click to collapse
Thanks but iam already on stock i have used RUU to reset the phone, same result. And liqued damage is possible any idea what would help?
Or is it possible that the connector on the board is broken?
As you start to eliminate your possibilities the fixes become more difficult.
If your back on stock everything and still bad then its going back to board level stuff. Meaning the connector on the board or something along those lines.
If thats the case then the fix is near impossible.
Might want to get a good strong magnifying glass out and see what you can find.
IAmSixNine said:
As you start to eliminate your possibilities the fixes become more difficult.
If your back on stock everything and still bad then its going back to board level stuff. Meaning the connector on the board or something along those lines.
If thats the case then the fix is near impossible.
Might want to get a good strong magnifying glass out and see what you can find.
Click to expand...
Click to collapse
ok i will see what i can find, and thanks for your assistance.
Did you ever find out what it was?
My HTC One has a 1/4" section that doesn't respond to touch at all.
Hi
I have the same problem in my HTC ONE E9 PLUS where a longitudinal line along the screen does not respond. Does anybody find a solution for that please?
Davideoo said:
Hi
I have the same problem in my HTC ONE E9 PLUS where a longitudinal line along the screen does not respond. Does anybody find a solution for that please?
Click to expand...
Click to collapse
Most likely a faulty digitizer, replace your lcd assy.
My touch screen is having issues.. In one area about 3/4 down near the bottom across the length the screen is not responsive.. Here is a picture showing where /i62.tinypic.com/2ykn8rd.png (please add the http:/ before the link to check it)
I checked the touch with the service test
Is it a problem with the hardware? Because I haven't dropped it and there aren't any cracks..
Only thing I can think of is that my charger wire is a little frayed and that charge has seeped into the screen.. But is this damage permanent or how can I fix it ?
Any help would be much appreciated.. Thank you
Any help please?
randikag said:
Any help please?
Click to expand...
Click to collapse
Hi there, I'm sorry I couldn't find any information regarding your problem in the web and the way how to fix it. I'm suggesting you to send your phone to specialized repair center (Sony). Or you just can give a try and reflash the rom you're using, maybe it causes this problem - nobody knows until you try.
Good luck! If you're answering or anything like so, please quote the message that I'd be able to see it.
Hi, if the touch screen previously works without problem, can be an hardware damage of the touch screen panel, as you can see there is only one row that don't works, all you have to do is replace the entire LCD+Digitizer assembly, and the phone will works perfectly