Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01
What is the best configuration for optimal GPS reception ?
I have a Touch HD with Miri's 7.1 version (23017 build) with Manila 2.5.
Radio 1.09.25.14
My GPS reception lowered considerable since upgrading from original WM6.1 rom.
I have less satellites and it takes much longer to connect to them.
Anyone else have similar issues ?
thanks,
jabax
yves.alexis said:
What is the best configuration for optimal GPS reception ?
I have a Touch HD with Miri's 7.1 version (23017 build) with Manila 2.5.
Radio 1.09.25.14
My GPS reception lowered considerable since upgrading from original WM6.1 rom.
I have less satellites and it takes much longer to connect to them.
Anyone else have similar issues ?
thanks,
jabax
Click to expand...
Click to collapse
I dont know if mirri have included a difrent RADIO in hes ROM. But try a diffrent RADIO, it might help. And check youre GPS settings as this might changed when you flashed to a new ROM.
And another thing... This question should be in mirris ROM thread. Mod is gonna lock this tread any time now..
Hello all,
I have a Htc Touch Diamond (Rom 2.03.404.3 NLD, Radio 1.11.25.01) that I use with the GSM protocol only (I have 3g disabled for power consumption reasons).
My Diamond has the following problems:
- When I pull the USB/Power cable, sometimes the background illumination stays ON. I am unable to switch it off without performing a soft reset.
- Very often it appears that the phone is simply offline even though it displays full signal strength. It doesn't respond to incoming calls and I can't make any outgoing calls. I have to switch the transmitter OFF and ON again in the Comm Manager application before I can use the phone again.
This is a massive p.i.t.a: Sometimes I have been offline several days without knowing it !!! My phone is an unreliable piece of crap and I'm desperate to make it work more reliably. I don't need too many bells and whistles, I just want it to work. I think it is a power management or radio issue. I therefore installed HardSPL and a newer radio version (1.11.25.01) but the situation has not improved.
I am grateful for a tip on which ROM/Radio could solve these reliability issues!
Thanks in advance,
Arthur
Wow, very strange issues!
First, flash this radio : http://www.megaupload.com/?d=USMNPAS1
Second, flash this ROM with MTTY method : http://forum.xda-developers.com/showthread.php?t=521941 (It's the best ROM with WM6.1/TF3D 2.1, you can't find more stable)
You have to know too that : when you flash a radio, you have to change too a DLL (rilphone.dll) in WM to link up both. Gen.Y ROM includes 1.13 rilphone, so you will more performance & stability with the 1.13 RADIO.
If yours problems continue, it's maybe a hardware problem, or maybe a SIM problem ? (i already seen SIM card who makes a phone do many bugs)
Hop i've been useful
Thanks, I'll try that.
Hello
I noticed a really wired behavior of my Vario III/ Kaiser since a few months now.
It loses randomly and not reproducable the GSM Service Connection but doesn´t tell me that it does. So it shows the normal signal-strength icon and I´m not able to notice the lost.
The only way to make it working again is to re-enable the "Phone/Flight Mode" with the Comm Manager.
I did a few ROM Flashings and also tried different Radio-Roms, hoping the problem would disappear.
Well, it didn´t. So I searched the forum here but didn´t get a helpfull thread neither a solution.
My Data:
T-Mobile Germany
ROM: ahmedfikry wm6.5 23563 Tilt UC light rom
RADIO: 1.71.09.01
Same problem with these ROMs and Radios:
1.71.09.01
1.70.19.09
1.65.16.25
Kaiser_28004_V0.9_GER_ChrBeck
TPC_V11_KAISER_CHUMP_STYLE
Maybe some of you can give an advice or better a solution. It´s anoying not knowing wether you are reachable right now or not. And it just produces problems when your girlfriend sends texts, they can´t be delivered and you come late....again
Hard-SPL should be 3.29 or 3.56
I bought my Topaz from Vodafone Germany and it was shipped with WM6.5
I put HSPL on the phone and flashed several shipped WWE WM6.5 ROMs without any problems so first thx a lot for that great work
Unfortunately all the WM6.5 ROMs I tried so far had tons of bugs like I didn't get incoming calls although the phone was turned on and registered on the network all the time, the phone completely froze after ignoring an incoming call (I had to reboot it twice before it worked again) and while I was listening to music through a wired headset the phone still played the music over the built in speaker too.
Cause all of these problems I had with WM6.5 I decided to flash a WM6.1 ROM but when I tried that I ended up with the device not booting anymore.
It only showed the black TD2 screen and very quick after displaying the radio version in the lower right corner of the screen (in red letters) it rebooted itself. It did that in a loop and the only way to stop it was to remove the battery.
It's exactly the same problem as described here:
http://forum.xda-developers.com/showthread.php?t=693697
After playing around with different ROMs & radios I figured that it's not a problem with WM6.1 itself but with the radio versions.
As soon as I flash a radio version older than 4.48.25.20 my TD2 gets stuck in that reboot loop while with radio versions 4.48.25.20 and above it works just fine.
However the problem is that WM6.1 won't work with such new radio versions - it starts but then crashes after a few seconds so I need to get my TD2 to "accept" older radio versions in oder to get WM6.1 working.
Will CID/security unlocking the device fix this or is this some new kind of lock that can't be removed yet?
thx
karlmueller
Just curious, do you hard reset after you flash?
There shouldn't be that many bugs in WM 6.5.