Related
I am not sure what I have done. I have a cingular 8125 G4. Downloaded the Risidioro g4 rom upgrade and my phone was not probably CID unlocked. Thought that did not matter cause I was able to install Mr Clean ROM couple of months back. I read some users in the forum who successfully upgraded from Mr Clean.
Everything went nice and smooth, the upgrade completed 100% and when it finished and rebooted it stopped at the blue, red screen and got stuck there. I did soft reset, hard reset but every time that blue, red screen comes up and gets stuck.
Has my phone become a "nice but dead piece of furniture" ? Oh! man..that would devastating!
Please help!
BigMonty
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Got another guy who successfully got out of the jail by having a SD image. Do you think it would work for me too? If it works where can I find it? I already e-mailed the guy, seems like a nice guy, let's see if he replies.
http://forum.xda-developers.com/showthread.php?t=274471&highlight=dead
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Btw,
Spl 2.25.0001
Ipl 2.25.0001
Can somebody suggest what would be most suitable ROM to go for once I am in the bootloader screen?
Vilem said:
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Click to expand...
Click to collapse
Thanks a lot Vilem for your reply. Yes I see a USB connection..but I guess we can't get to activesync because the OS did not load yet. I had the Mr Clean ROM installed and I tried to go for it but failed. What should I do now? Go for the original shipped Cingular ROM?Anybody knows which version it was and where can I find it?
bigmonty said:
I see a USB connection..
Click to expand...
Click to collapse
Means connected, try it. Mine crashed a couple of times like that and managed to get it going again.
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
bigmonty said:
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
Click to expand...
Click to collapse
try the last succesful.
bigmonty said:
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Click to expand...
Click to collapse
Bigmonty - after getting into allsorts of issues after trying to upgrade my G4 to various 3.2 based ROMS, i also got to the bootloader screen with the USB indicator in the righthand corner.
This worked for me - take the battery out for an hour or so, put back in and soft reset. make sure you have a good charge. reboot the PC and plug in the device.
Now the only ROM i can recover a working device from isto use the latest ROM from the phone supplier. in my case from the club i-mate site (my device is SIM unlocked).
hope it helps
Thanks AirWol. I was able to go back to Mr Clean successfully, which was a great relief. What I was doing wrong was, I was using the wrong update utility of Mr Clean. I should have used the one which was modified according to Risidioro guide for use in g4 chips. But I was using the original Mr Clean instead.
BTW, anybody knows whether it is possible to update g4 phones to the latest Risidioro or Cingular 2.26 ROMS? That is, can I modify according to Rididioro guide for use in g4? Anybody?
Probably I haven't learned enough lessons yet!
I did the hardspl. Then flashed the radio. After the radio flash, it still brings up the AT&T splash screen, but NO sounds. After that loads up...then I get a all fuzzy screen - NO PICS - bunch of different colors. PLEASE HELP ME. What do I need to do??
flash a radio that's compatible with ur rom
How?? And which one? Im using the stock AT&T OEM ROM. I cant get it to connect to activesync or anything. I get as far as that fuzzy screen I was telling everyone about.
why did you flash just the radio. There is a wiki or something around here that tells you what radios go with what rom.
I thought I was supposed to flash the Radio ROM first...then flash the new ROM. I can get it unto bootloader by using the camera key and the reset hole. Gives me the 3 color screen...I just dont know what to do from this point. I'd rather just go back to the stock ROM and be done.
KEEYA
http://forum.xda-developers.com/showthread.php?p=2061457
So thats going to do it? Ok...PLEASE HELP ME with this next noob question.
This is the ROM I was TRYING to flash to:
Dutty's Official WM6.1 5.2.19199 UC RTM
What RADIO ROM do I need with that? The one that put me in my current situation is:NIKI_Radinly_1.58.16.27_CustomRUU
ChumleyEX said:
why did you flash just the radio. There is a wiki or something around here that tells you what radios go with what rom.
Click to expand...
Click to collapse
to be honest, all you have to do is use search and some of the words in your question..
http://forum.xda-developers.com/showthread.php?t=349375
also some people have the radios they use in their signatures. Just look around.
Ok. So I'm downloading the 1.27.12.11 Radio ROM right now.
i'll have to go get a micro SD.
How do I run it from the micro SD in bootloader mode with the 3 color's on the screen? It says serial on the bottom.
I REALLY appreciate your help. I have been reading a lot...its just really confusing to me.
Thank you again for all your [email protected]!
I already posted how to do it with the SD card.
I just re-read it again. Thank you! Now...I'll have to do 2 seperate flashes right? 1 for the Radio and the other for the ROM?
yup, hopefully everything goes smoothly. Don't be afraid to try some of the other radios.
Im afraid to try anything now..haha. i just want it fixed then I'm leaving it alone. Obviously...I'm WM-Retarededed
Neh, you just had a bad first time. It gets better with practise. READ READ READ.
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
when did you buy your wing???
and are you using flashcenter ?? so it can temporary cid unlock the device?
i got my wing in feb or march 08. yes i do have flash center, and i have used it w/o problems before. i have flashed from touch it to open touch and one of aserg's roms too. i have been using OT 4 lite black for weeks now. i have been watching the threads about the new OT 5. so i downloaded it and nothing new is flashing.
does this help any?
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
ttran i'm honored!
ttran001 said:
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
Click to expand...
Click to collapse
iwas hoping not to bother any of the main guys with this little problem, but i'm glas your here (love your OT's btw ). ok, i am using the standard activesync method.
heres what i do:
1. download new rom and put it inside my RUU folder on my computer's C drive.
2. run the herald-uspl.exe.
3. follow the prompts
thats all i do and it used to work. i don't know if this helps, but it's the only other thing i have been doing diff. on another thread i asked if it was ok to delete old roms out of my RUU folder. i actually removed my OT v4 lite black and then put the OT v5 UL and ran the uspl. do you think thats what it is? maybe you have to have your old version in the RUU before you flash to a new version?
hope this helps
No. You don't have to have anything but your newest ROM in the RUU folder. When flashing, the phone doesn't know or care what you currently have flashed, unless that ROM is causing problems with your active sync. If that's the case, place your phone into bootloader mode, install the stock ROM (unless you have a HardSPL phone, and it sounds like you don't since you're using USPL.) Then boot up the ROM and run the USPL.
ok, so now know what to do, but why did this happen? whats wrong with the herald-uspl?
i just checked my device info and it says im running open touch v3! i thought that i was using v4. i have hard-spl downloaded, but i dont know if i need to use it or not. should it? then try to flash?
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
shep211 said:
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
Click to expand...
Click to collapse
OK, i'll give it a try
Link to unlock phone software and howto
http://forum.xda-developers.com/showthread.php?t=358225
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
dougstoner said:
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
Click to expand...
Click to collapse
actually, here is exactly whats in the RUU.
i hope it helps
Ina Weetald
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
digitalknoll said:
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
Click to expand...
Click to collapse
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
it looks really sweet!!!!
dougstoner said:
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
Click to expand...
Click to collapse
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
digitalknoll said:
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
Click to expand...
Click to collapse
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
dougstoner said:
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
Click to expand...
Click to collapse
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
The HardSPL makes it so that if you flash a bad flash, you don't have to flash into the Stock RUU again just to get a working activesync connection to be able to flash again.
Courtesy of Ivanmmj
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
Hey, I was scared for a LONG time to do it...I read so much info before I finally decided to do it! It took me like 2 weeks of reading before I decided. It's an EXTREMELY simple process. Plus, it makes flashing easier. I was getting weird errors trying the USPL method sometimes. Anyway, just do this.
FIRST, make sure your IPL number is atleast 4.000 or higher. You can check this by holding the camera button down, and then doing a soft reset. HOld the camera button down till you enter the bootloader menu. (It's like 3 gradient colors).
If it's higher, great, you are ready to proceed.
Next, download this file.
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Unzip it, and it will contain 3 .cab files you need to install in a certain order.
1. Install canonyang.cab
2. Next, aserpolicy.cab
3. disablesecurity.cab.
Do a soft reset.
Put phone in flight mode!!!!
Now, go to the folder you just unzipped that file from. I think the default folder will be called hard-splwm6 or something like that. Go and run the RUU.exe file in it. Just follow the instructions. The screen of your phone will go white, but just wait, wait, and it will reboot itself.
Presto, you are hard spl, and can load whatever rom you wish!
Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
localcall001 said:
Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
Click to expand...
Click to collapse
hi if you have done the hardspl then try this
to enter Bootloader
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
you should see serial at the bottom of the three color screen then plug in the usb cable the serial should change to USB then just flash another rom.
i hope this helps you.
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
only to pleased to help I am glad you got your phone back working
localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
idd, this is not ROM related, its just unlucky like hell. See the phone as a PC, where blocks need be written. If a block fails or is corrupt, you get these jokes. Its like a BSOD on a Windows PC.
I gotta admit it is great knowing that once you've done a hardspl you are safe as houses as even if you flashed the most currupted ROM, the bootloader will always allow a reflash.
This is way more stable and safe than any other experience I've had of phone flashing.
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Funny that, your latest ROM was the only one I had problems with - the same problems as the original poster, in fact. I flashed a different ROM fine, re-downloaded your 2.0 and flashed it again, same problem. Hanging on the boot screen.
b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Probably I think I was just unlucky. My fear (while I was panicking) was that your ROM is European based, and since mine came from T-Mobile, it didn't mesh well. I also didn't unlock my phone so that could be also be a problem...
awesome community
localcall001 said:
That's a really cool recovery feature from HardSPL...
Click to expand...
Click to collapse
well..this is a normal recovery feature for stock spl also
Same Issue
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
wahida76 said:
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
Click to expand...
Click to collapse
no one have told me that on my thread... only here i found this issue.. and finally how pass the problem?
I had to re-flash a different ROM.
I'm wondering if it's related to the radio version...
what is your version of radio
can't you flash the latest 23060?
i use radio 3.36
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Alas, no luck with that one either.
I have no idea why it doesn't seem to work on my Rhodium :/
I'm sorry if I'm hijacking this thread but it's the only one I've found that's even close to having the same issue I have, though I'm still using the stock rom/os.
I was installing winmo msn messenger. It installed fine and reset my tp2 fine. It goes thru the tp2 splash screen, the verizon splash screen and the winmo splash screen. Then it shows owner information and this is where it gets screwed up. Owner info will stay up forever if I dont touch the screen. After touching the screen the only thing left will be the top bar and the rest of the screen stays black. The only things on the top bar are the signal icon (which always has an x), the wifi icon (which seems to be connected fine lol) and either owner info will still be in the upper left or the start menu will be there. Hitting the screen only causes my tp2 to beep.
Nothing I know how to do (which is basically just hard and soft resetting it) works. Verizon can't fix it (didnt think they would be able to) and I can find no drivers (possibly cause I'm still a noob with winmo) to resolve my issue. I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd. If I could get a rom for the verizon one I think I can figure it out from there with no issues...but htc website sends me to verizon website for support and vice versa. The htc wiki is the closest I've gotten to an answer...but no rom to download. The only OEM roms I can find anywhere aren't for this phone, unless one of those will work? You guys are the experts.
Does anyone know what I can try? Verizon wants me to return it but cannot tell me when I'll get my new one as they are out of stock...again. Please help lol! Thanks for any and all help.
Mr.Clark said:
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Click to expand...
Click to collapse
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
b16b said:
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
Click to expand...
Click to collapse
Sorry, I tried that one as well yesterday. And I've downloaded your ROM a few times too...
Are you still working on the 6.1 ROM? Maybe a new version will just magically start working for me...
EDIT: Tried a fresh 3.46.25.30 and a fresh download of your ROM. Still nothing
I received a G1 from a friend, this isn't actually the first G1 i've rooted. I have one of my own, and I have done about 3 others without any problems what so ever.
I'm not exactly sure what went wrong. I had flashed the recovery, following the cyanogen wiki, and when I got to the flashing the Hard SPL part, i flashed it, (and the radio) and i restarted, and thats it. It just stays at the G1 screen.
No combination of keys work. Home + Power. Camera + Power. Nada.
From most of the threads I've found, I can almost say its a brick, but I just wanted to double check that theres nothing I can do (ADB?).
Thanks!
red.Wood said:
I received a G1 from a friend, this isn't actually the first G1 i've rooted. I have one of my own, and I have done about 3 others without any problems what so ever.
I'm not exactly sure what went wrong. I had flashed the recovery, following the cyanogen wiki, and when I got to the flashing the Hard SPL part, i flashed it, (and the radio) and i restarted, and thats it. It just stays at the G1 screen.
No combination of keys work. Home + Power. Camera + Power. Nada.
From most of the threads I've found, I can almost say its a brick, but I just wanted to double check that theres nothing I can do (ADB?).
Thanks!
Click to expand...
Click to collapse
I know how frustrated you must be that actually happend to me before idk if the same thing caused it but try to do the whole process all over if that doesnt work i sudgest looking for how to unbrick your phone
jamal717 said:
I know how frustrated you must be that actually happend to me before idk if the same thing caused it but try to do the whole process all over if that doesnt work i sudgest looking for how to unbrick your phone
Click to expand...
Click to collapse
Did you even understand what happened? How's and what is he supposed to do over again if he can't get into bootloader or recovery?
OP, Sorry to say, you have a brick.
borodin1 said:
Did you even understand what happened? How's and what is he supposed to do over again if he can't get into bootloader or recovery?
OP, Sorry to say, you have a brick.
Click to expand...
Click to collapse
looks like i've done similar to the OP --> flashed a non EBI1/32A radio.
Now it just hangs on the HTC Dream splash screen.
Yeah, looks like were **** out luck lol. I ended up buying a Magic Slide. Whats weird is that i flashed the radio B4 the spl.
red.Wood said:
Yeah, looks like were **** out luck lol. I ended up buying a Magic Slide. Whats weird is that i flashed the radio B4 the spl.
Click to expand...
Click to collapse
sent it back to the SP with a story of how during the flash the computer crashed. here's to hoping.
got the phone back after being charged about $25 to repair.
anyway this time i read the instructions properly. left the radio on 3.22.20.17 and then installed the one click root and flashrec apps. I then rooted the phone, download Anon-RA's recovery image with flashrec. I then followed the cyanogen wiki and froyo is now running on it.
red.Wood said:
I received a G1 from a friend, this isn't actually the first G1 i've rooted. I have one of my own, and I have done about 3 others without any problems what so ever.
I'm not exactly sure what went wrong. I had flashed the recovery, following the cyanogen wiki, and when I got to the flashing the Hard SPL part, i flashed it, (and the radio) and i restarted, and thats it. It just stays at the G1 screen.
No combination of keys work. Home + Power. Camera + Power. Nada.
From most of the threads I've found, I can almost say its a brick, but I just wanted to double check that theres nothing I can do (ADB?).
Thanks!
Click to expand...
Click to collapse
borodin1 said:
Did you even understand what happened? How's and what is he supposed to do over again if he can't get into bootloader or recovery?
OP, Sorry to say, you have a brick.
Click to expand...
Click to collapse
It definitely sounds like you have a hard brick. I think the only way to fix your phone is to JTAG JTAG it. Which I have no idea how that works or how to reload the software on your phone.
Go to this thread, this explains all:
http://forum.xda-developers.com/showthread.php?t=591048