Related
I just bought an Asus M6VA laptop (called Z70 something in the US), and it has built-in Bluetooth. I can connect with the serial port OK, I can use the Dial-Up Networking to surf the net with my laptop and the BA as the modem, but I'm unable to get AS working. I have AS over BT working with my office computer, that has a Logitech DiNovo Media Desktop bluetooth, with Widcomm stack. But the Asus has a Toshiba stack with a totally different setup, and I can't get it to work.
The Widcomm stack sees AS and even an audio gateway, so I can use the PC as a handsfree device for my BA (even though the sound's rather terrible), but the Toshiba stack only sees a serial port and DUN on it. i would appreciate any pointers and help!
have you set up active sync on your laptop to connect via bluetooth.you have to click on file conection settings and select allow connection to one of the following and then select the com port your pocket pc is using.also when you setup your pocket pc to connect to your laptop it gives you the option of serial port but you also have to have active sync selected aswell if it does not show up then press refresh.let me know wat happens.
I tried again, and when I connect the serial port, I see "Microsoft ActiveSync cannot recognize this device for one of two reasons " and then it suggests that it wasn't connected properly, or that it isn't a PPC or smartphone.
I have the serial port on the PC set to Com6, and AS is set up to allow syncing through that port. On the PPC I have outgoing port Com 0 (just about the only port I could get it to accept, but I tried one other, I think it was Com 9, and that didn't help). I have done a bunch of refreshes but I can't see active sync as an available service on the laptop. I belive that's the problem, since I could see that on my office computer, and that connected and synced without problems.
In AS on your laptop delete any previous partnerships with your PDA. If possible, delete any laptop partnerships in AS on your PDA as well. On your PDA, go to Settings -> System -> Bluetooth Settings. Choose to start AS setup...
It sounds like your laptop may be using the MS drivers... There should be an option to make your laptop Discoverable, but I'm not very familiar with the MS stack... more familiar with the Widcomm. Look for something like Advanced settings in the left window pane...
Let us know if any of that helps!
I have tried that , but clicking on the Start button gives me a window "Please bond with other Bluetooth device which supports serial port or Active Sync profile as your AS partner". And I have already bonded! Bonding again doesn't change anything.
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/579009962631/m/519002845731 use these instructions that is what i did and it worked fine.let me knw
Nope, it doesn't work at all. Like I said in the first post, this is not a Microsoft stack, it's a proprietary Toshiba stack, and it doesn't have any of the setup windows or settings that this guide mentions.
You've probably thought of this....
Maybe you need to manually create a serial port to your PDA... When you paired the PDA to the laptop, what services were you offered? If Serial port is available, create the connection, note down the COM#. With BT started, in AS allow synch via new BT COM port...
Yes, I have tried that, and it didn't work.
I finally managed to do it! I found a way to use the Micro$oft BT Stack instead of the Toshiba one, and now I'm finally set up for AS over BT with the guide mentioned above. Thanks!
Folks, when I attach my Kaiser (MDA Vario III) to my laptop using Bluetooth, I can sync without a hitch... However, when I caonnect it via USB, I get the following: [see screenshot attached]
Any ideas? I can't fins any info on t'web?
Right... Had my Tytn (SPV M3100) replaced by Orange. This now does the EXACT same thing. Vista SP1, methinks...
Make sure you have the latest Windows Mobile Device Center installed and while your kaiser is plugged in run windows update and see if there are any driver updates available.
Try killing mobsync.exe in task manager (on the desktop pc). Then restart WMDC.
or plug in the usb, then open windows update and check for updates, it will detect it hasnt got the relivent drivers and downloadn them for you. normall its supposed to do it automatically if it doesnt find the drivers but for some reason it didnt work
Thanks sofar...
But I've tried all of the above.... To death. It works fine with my Athena & my Tytn, not with the Kaiser though...
I've been having the same problem. Thought it was one of the roms I had cooked initially but then I tried a few more roms (Duttys was one) and I still couldnt sync. Either on WMDC in Vista or ActiveSync on XP.
Now I think the USB is damaged - although it still charges fine. Bluetooth sync is fine too.
Now, i don't sync my device at work on my vista machine, but i can still connect to it.
None the less, I was looking at my windows update history and when i first installed the mobile center or whatever, i downloaded an update that is listed as failing to install in y windows update history.. so.. id ont know why it fails.. but yeah..
Had the same problem, but seems to be OK now.
I followed the help file in the Mobile device center -troubleshooting a cable connection. I post it her for reference. Don't know exactly what solved the issue (I hope permanently) but possibly the firewall ports?:
-----------------------
Check the device for relevant system messages and address any conditions affecting the connection.
Ensure that the device and the PC both have USB connections enabled:
In Control Panel set to Classic View, open Windows Mobile Device Center. Select the Allow USB connections check box.
In ActiveSync on your device, click Menu > Connections, then select the Synchronize all PCs using this connection check box.
Disconnect and reconnect the device.
Disconnect, restart, and reconnect the device.
Disconnect the device, restart the PC, then reconnect the device.
Do the following:
Disconnect the device.
Open the following ports for all programs in the PC firewall:
990: open inbound TCP port
999: open inbound TCP port
5678: open inbound TCP port
5679: open outbound UDP port
5721: open inbound TCP port
26675: open inbound TCP port
Reconnect the device.
Do the following:
Disconnect the device.
Disable the antivirus program.
Reconnect the device.
Do the following:
Disconnect the device.
Open Network Connections in Control Panel on the PC.
Right-click the local area connection created by Windows Mobile Device Center, then click Properties.
In This connection uses the following items, select every check box (to select all protocols).
Reconnect the device
fixed for me
I was having this problem. I'd also noticed that windows update was having problems installing a related update 'windows mobile remote adapter'.
Followed the advice in the help file re opening ports in the firewall. (FYI when adding a port just type the port number in the name field and in the port field).
It still wasn't working but when I did windows update after opening the ports it worked and is now connected.
Hope this helps
-------------------------
v1615 on Orange UK
ROMeOS.v4 07/27/08
radio 1.65.24.36
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
I don't even know what enable advanced network functionality does. When unchecked, I see "connecting to host" everytime I cradle my Tilt. AND I never have sync problems, nor do I get the error message alluding to changes on the server and all changes will be lost.
Hi everybody,
It seems strange ,but after 2 weeks of good job,my Diamond can't sync
with an XP-laptop running Actisync 4.5 using bluetooth!!
My ROM is 1.37 WWE,working fine for all tasks....
Apparently the "ActiveSync service" is no more seen among the services after
pairing with laptop....
Cleared all relationship and rebooted the diamond.....nothing to do.
Other HTC devices (TYTN, Himalaya ,all with Windows mobile 6.1 work fine and syncronize via bluetooth...).
Please help me ..! I do not want hard-reset my diamond
Thanks
Have you updated your Xp to Sp3??
Search for Activesync Windows Sp3 there are several people thats having that issue.
I have had similar problems on both XP and Vista. You could try uninstalling your Bluetooth driver on your PC and rebooting. Your PC should re-install your Bluetooth drivers after reboot. Make sure the partnership is cleared from your handset and try to set up the relationship again.
If you are having the same problem I was having, then this should work for getting the two to talk to each other again. However, in my case, after I rebooted again, I would start getting "Port Not Available" errors on my Diamond.
I ended up installing the BlueSoleil bluetooth drivers on my PC and things are working much better now. If worse comes to worse, you can try them. You can run the trial version forever, but, it is limited to 5 MB transfers per session.
Good luck.
ActiveSync via bluetooth problem ...again
Thanks for all suggestions....
Yes ,i updated my Xp to SP-3,but it seems to be a "Diamond-problem" because if I use another 2 phones (HTC:TYTN-1 and Himalaya,both with Windows mobile 6.1) no problems occur when syncronizing with Xp laptop
via bluetooth........this is a matematically demonstration ,I think.....
Furthermore this problem occured just today ,while XP-SP-3 was installed 2 weeks ago.....
Thanks again
Giuseppe
Perhaps too simple, but did you activate "Transfer" (use to be called "Beam") as well? As being renamed on your Diamond it is easy to overlook.
To Rondol1
Hi Rondol1,
Maybe you mean "receive all beam" -in bluetooth settings....
Yes,sure,but it makes no difference....
Thanks
ActiveSync via bluetooth problem ...again-2
Using PHM_Registry_Editor I took a look inside:
HKLM_Sw_Microsoft_Bluetooth_Device_...._services_0001101-0000-ecc.ecc.
"name": Serial port (instead ActiveSync!) tried to change...but does not fix.
The curious is that "TYTN" -working correctly via Activesync-Bluetooth---
has the same string and values!!!! for all the other variables...
It is a mistery at the moment
Has nobody a solution for this yet?
br
Tomas
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Here's a funny troubleshooting tip. Apparently Windows media Player on your pc can interfere with Activesync. make sure its not running in the task manager before trying to sync.
Surur
Thank you cserran1.
I had the same problem and made instruction like you said and it works great http://forum.xda-developers.com/images/smilies/smile.gif
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
You're a star - nothing was working until I tried an 8 digit passcode!
Cant connect bluetooth to diamond
Im having problem when i try to pair my bluetooth device "MSI star key 2" with the Bluesoleil sofware program, whem ive typed in the 4,8, 10 digid passwords i get connected but just after 3 seconds i get disconnected again, can i be sometith with the "com 19" port.
i have tried uninstalling bluesoliel software and diffrent typed of bluetooth dongel but no luck
i have a siemens gigaset SL37 that connects fine with bluetooth and sync with my outlook contacts
Perfect
I have waded my way through multiple threads trying to figure out how to get Bluetooth to work on an XP SP3 PC with BlueSoleil and activesync 4.5 and a HTC Touch Diamond. I ended up catching this suggestion of 8 digit key, and used my phone number (all 11 digits) and that solved it. it now syncs without issues.
Thanks
Only thing working
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
That's the only thing that helped! Don't know the reason, but I know it works.
Thanks a lot.
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
I had exactly the same problem because I used a pass with 4 char. When I put a long pass like 8 char the " Activesync" service appeared from my pc ......amazing !
not a ROM issue
micdoc said:
I had exactly the same problem because I used a pass with 4 char. When I put a long pass like 8 char the " Activesync" service appeared from my pc ......amazing !
Click to expand...
Click to collapse
i just posted a while ago in freya ROM's thread about this bluetooth issue and i chanced this thread. problem solved!
Hi,
Just got my xperia today, but I'm still new to Windows Mobile. I want to transfer media files to my phone from my mac, is there any software that can let me do this relatively easily like by drag and drop? My mac doesn't seem to even recognize the x1. Also, I have a 8gb microsd card already inserted into the phone, but it doesn't seem to recognize the memory at all. Any help would be great, thanks.
I don't have a mac, so can't help much, but there's one thing I can think of. you might have tried it already, but...
Did you try going into Start > Settings > Connections > USB to PC and setting this to "disk drive"? I would have thought that this makes the phone act just like a USB drive, so there wouldn't be a problem as long as the Mac can see standard USB sticks.
Active Sync certainly won't work, it being Microsoft Active Sync, but maybe as a USB "Drive" it might...
Hi ... You must use Missing Sync ... you can use it via USB or bluetooth ...
Bye.
The Missing Sync seems the most popular with Mac users - apparently really good:
http://www.markspace.com/products/windowsmobile/mac/windows-mobile-sync-software.html
I just use the Disk Drive option in USBtoPC.exe ...
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Sync wth Mac
Hi Guys,
I am using a WM5.0 Dopod 838 Pro but looking to change to experia soon. I used eltima syncmate to sync my Dopod to my Mac. The freeware works great and IMHO, it is more stable than Missing Sync.
Cheers
aFo3262 said:
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Click to expand...
Click to collapse
What ROM are you running?
I will check the rom version in a second, but I remember that it was dated for the 29th of August. I got the x1 to mount as a disk drive, but I was confused about where to drag my media files for the media panel to recognize the stuff in my storage card. Not only that, but dragging and dropping was incredibly slow and I was only able to get 5-6 songs on to my phone before the lag became unbearable.
hey guys thanks for the help in the missing sync. New problem now lol. I transfered my music and vids to my memory card and the media panel read it fine. But my touchFLO3d manila HD can't seem to detect any media from the card at all. Is there any way to change this?
I got my Xperia on Friday and have spent the last 2 1/2 days trying to sync it with my Mac using Missing Sync. I was using MS V4.0.3 and then after upgrading to V4.0.4 and a hard reset (I think) things stopped working. The MS activity log said it couldn't connect to the sync client on the X1 (I also couldn't sync my old Dell Axim X51v either). I tried uninstalling and re-installing multiple times but still no success. After 2 days, I binned MS thinking it was the problem and purchased Eltima's SyncMate. Again same result, couldn't connect with the sync server.
After much googling if found the following post (http://forums.markspace.com/viewtopic.php?f=5&t=5349) in Mark Spaces forums of all places. Copied and pasted the commands into Terminal restarted and everything is fine. Good old Apple.
Hi,
Using SyncMate right now with my new X1.
I'm using the free version, so far contact syncing is ok with the only problem being certain number fields in Mac's Addressbook not showing up in the phone. But this is pretty common problem among all Mac <-> WM syncing. Just need to play around with the info fields in Mac Addressbook.
Right now the problem is the internet sharing to the phone is not working (sharing Mac's LAN connection to the phone). I know this used to work when I was using the same copy of SyncMate with a WM 5.1 Palm Tero I had borrowed. So far SyncMate doesn't seem to show the dialogue box that it discovered a internet connection and is sharing it with the phone.
Of course the Mac has working internet connection.. I'm using it now...
Any help and advice on this issue or any other Mac <-> WM tips are welcome!
As was said above, I use syncmate on my wifes. I used to use missing sync but it didn't always seem to recognise teh phone and had limited features. So I use Syncmate now. Have also tried pocketmac whcih was similar. Both softwares allow you to sync files, contacts, calander, install softwares adn will also mount the phoen as a hardisc on your mac without stopping eth phone from still being able to access it (if you put it into usb disc mode the phone no longer has access to teh memory card untill you disconnect). They can also connect wireless, usb or bluetooth.
I'd try either of the above instead of missing sync. Missing sync just didn't do the job well enough if you ask me.
As for the internet conenction issue, mine just works......have you checked teh connection settings in teh actual phone?
Hi
I tried using the free version of Syncmate with my Xperia, it doesnt recognize my phone. I am using the latest R2 ROM version. Any help ???
thanks!
internet
can please somebody help me, i have a mac and se x1 and i cant connect on internet from my mac via x1 i tried everything over usb, bt, internet sharing, sync mate , nothing works please help.
p.s. sorry about my English
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
2. On the X1 start Internet Sharing - PC CONNECTION should be set to BLUETOOTH PAN and NETWORK CONNECTION to whatever your ISP requires - SELECT CONNECT down in the task bar (bottom left) - should now say CONNECTED.
3. On your Mac open the BT Preference Panel from System Preferences or the clicking on the BT status icon in the menu bar (top right of screen). Click on your Xperia device (to select it) in the left-hand side-bar. Its status should be displayed in the right-hand panel (paired - yes; connected - no). Click on the task button (the one with the cogged wheel next to the minus button, bottom left-hand corner of the BT preference panel and select CONNECT TO NETWORK - status should change to connected.
4. To disconnect - select disconnect in the task bar of Internet Sharing on the phone or disconnect from network in the Mac's BT preference panel.
The process has to be done in this order. If you don't connect to the internet with the phone first, the process fails.
nonno said:
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
...
Click to expand...
Click to collapse
What OSX version do you use to build up the PAN between Mac and Xperia?
Seems not to be OSX 10.4 because it has no
task button (the one with the cogged wheel next to the minus button, bottom left-...
Click to expand...
Click to collapse
Sync Xperia with mac
Hi everyone, new to the forum so bear with me. I've recently acquired the software "The Missing Sync" to be allowed to edit and fix up my phone through my mac. When I plug in my phone, the computer only recognizes it as a mass storage device and the program will not detect it. Do I need to update the firmware on the phone to up to date with the most current version of The Missing Sync? Any help would be greatly appreciated.
Regards
hi guys,
i have a problem concerning the sync of my x1 via bluetooth connection...means that i can establish a bt partnership. but when i hit "connect via bluetooth" in the x1s activesync it says that it cant establish a connection to a activesync-supporting pc. an wheter i want to establish a bt-partership with another device. when i hit yes i can search for another device. when i search a again for a bluetooth fitted device it (of course) shows me my pc.
the weird thing: at first launch of the x1 it worked via bt!!!
I checked the services:
x1: Active Sync is activated...
in bt-settings on my pc: ActiveSync Bluetooth Service is also activated and OBEX. In the windows mobile device center the setting is: allow connections via: bluetooth. I also can choose IR and COM 3.
i tested if bt works by sending a (jpeg)file from the x1 to my pc...this is no problem.
cant figure the problem out. why can i transfer files but not sync via windows mobility center...crazy crazy...hope you can help me!
thanks a lot guys!
trekkie2003
seems like i have this problem: http://forum.xda-developers.com/archive/index.php/t-347472.html
i have tried to connect with following settings:
PC:
- Windowsmobility center: allow connections via com6
- bluetoothdriversettings: services "ActiveSync Bluetooth Service" is enabled!!! I also added incoming (serial) com connection on port 6 (com6)
X1 activesync: - services enabled: serial connection. Under COM-Connections there is an outgoing connection on com6...
as you can see no service "activesync" in the service list...but as alreade told the service "serial connection"
the problem still exists and active sync on my x1 gives me that error message:
"cannot find an existing bluetooth partnership with a pc that supports activesync..."
hope for some helpful advice...
greetz
trekkie
after numerous faq and forum post i figured out that the service on the x1 has to be "ActiveSync". it wont work with the "serial connection" service enabled! An in my case a only get the activesync service when i choose "allow connections via: bluetooth" in windowsmobile device center... but problem still exists..."cannot find an existing bluetooth partnership with a pc that supports activesync..."
you should not make the outgoing com on the pda
the guides they have here
http://www.geekzone.co.nz/content.asp?ContentId=3163
are still pretty valid seen from the pda's side
or you can google for other guides which step by step explain it on the
vista platform but
your issue is the way you set it up
thx rudegar for your reply and the link...
this was just a try with making an outging port on my pda...there is NO outgoing port added in my pda!!
i only set windowsmobile device center to com3 (allow connections via com3) and the incoming port of the pcs' btstack to com3...checked services on pda and pc...on both sides "active sync" is enabled! but problem still exists...
as my problem unfortunately isnt solved...to make sure nothing is interfering with bt stuff on vista i rebooted my pc. rechecked all settings. WMDC automatically reset the connection to Bluetooth! i changed it again to com3 as my btstack incoming port is also port 3.
i took a screenshot of the settings on my pc...(settingspc.jpg, see attachment)...
as i dont know how to make screenshots of my pda i can only tell you the settings of my pda....so i continued on my pda: active sync=> connect via bt => "error message: cannot find an existing bluetooth partnership with a pc that supports activesync..." => adding my pc to bt devices =>checking services on pda: only serial connection service...re-checked the services on pc... activesync is enabled (as you can see in the image)...
wmdc resets the connection settings to bt on every windows startup to bt!!! i downloaded a guide from toshiba für vista @winmo6. I did it exacetly the way they went through it like me!
btw. tried it also again with com6...but...no way... im starting to get really anoying about this...
I never had any problems with any of my WM 6-6.1 devices on my Vista64 system.. I have bluetooth in "Allow connections to one of the following" selection. No serial ports needed in WM device or in Vista...
But Before you sync, open the Windows Mobile Device Center on your Vista Computer!!!
Now open Activesync in your X1. Then just choose connect by bluetooth in WM Activesync App!!
Good Luck
Stuart
thats the way it worked at first launch!! just activated bt and here we go...no need chang com ports... maybe i should hard reset the x1 but i hate to re-install all programms i have on my device again as PIMbackup only saves contacts, calendar but not installed progams...
Hi
please can somebody explain to me how to connect my x1 via bt
I read many threads and still have a problem
I'm using windows XP SP3
thank you bye
my solution
I'm using ActiveSync over BT (R10 rom, Vista Laptop) but not really without problems...
For the 1st connection X1 never get's connected to Lappi. My Solution:
Make BT on Local Maschine unvisible, then again visible and after that on X1 -> ActiveSync -> Connect over BT.
What I don't like at all, ist that my BT on Laptop has to be visible:/ and compared to Nokia N95 (how there is working BT synch) the ActiveSync on WM6.1 is really crap.
Hope it can help you.
Best,
Mag
I did that but my X1 show me massege that cannot find partnership and I'm sure I have partnership
I use the COM method but I don't know how to select incoming port in my X1 I have only outgoing port
any idea please
same
I had same problem till 1 Week ago. I could not get rid of this message... finally I've flashed my X1 to the latest R10 ROM. Till now it works.
BTW: The R10 Rom is really the fastest I've ever tried on my Xperia (mp4 Videos without played without freezes and lauder music/tones). Maybe it is worth for you to do the upgrade too.
Best,
Mag
Quick reply without reading all your details, but maybe this will help.
http://www.howardforums.com/showthread.php?t=1482717
R10 rom ?
from where you get R10 room
the lastest rom is available for X1 is R2 !
can you explain please
thank you bye
With R10 i ment R2AA010 ROM (010). It is really good, the best I've had since I have my X1.
forgot... I you can find them here: http://forum.xda-developers.com/showthread.php?t=475482
Thank you for help
I was don't know about new ROM
I upgrade my X1 to new ROM
but I'm still have the problem
I had the same problem with broadcom bluetooth. I downloaded new driver for my PC, upgraded, and after that I saw "activesync" service in my bluetooth services. I set COM (COM6) and synchro works fine now
Try to upgrade PC drivers.