Please any1 help me, please [mms!] - Touch Pro2, Tilt 2 Windows Mobile ROM Development

hi i flashed my touch pro 2 with the original europe wm 6.5 on htcpedia.com
i have 6.5 on here but my mms does NOT work. ive been trying everwhere to fix it, i dont know how. im so in need to fix it please. i have tmobile. what to do?! i keep hearing about the mms.msg.eng.tmobile.com/mms/wapenc
but i did it it didnt work..i dnt if i did it wrong. could some one pleaseee im begging help me STEP BY STEP with what to do and what to download! u guys are geniuses on here please help me guys thanks so much. i need a fix cab or something.

Here are my working settings for T-Mobile MMS
First under Connections
Create a new connection named "T-Mobile MMS"
Under the Modem Tab press New
The name the modem "MMS" and it is a cellular Line(GPRS,3G) press next
access point name: "epc.tmobile.com" press next
press finish
now you can press ok and it should take you back to the connections settings
Goto MMS Settings under messaging
goto the servers tab
Make a new setting
Server Name: "T-Mobile MMS"
Gateway: "216.155.165.50"
Port Number: "8080"
Server Address: "http://216.155.174.84/servlets/mms"
Connect via: "T-Mobile MMS"
Send Limit: "300K"
WAP Version: "WAP 2.0"
Now press Done
Then highlight the setting you created and then press "Set As Default" button
Click Ok
Now power cycle your device
That's All

are u sure? i think mine doesnt work bc i have the original. not a custom rom. europe 6.5 version...it still will work..ive been trying all not. i greatly appreciate u writing back thanks! what version do u have, im so confused with all this cook rom stuff. idk what it means. just that i got 6.5 on there. but ima try now and tell u what happens.

Those settings will work just fine. I use unlocked Windows Mobile devices all the time with T-mobile and never have a problem. Also you can substitute wap.voicestream.com for epc.tmobile.com. Some people find it works better depending on the data plan you have. On my Rhodium I'm using 28014 Energy ROM with MaxManilla. Also please stop posting in the developer section. You will get an answer just give it time or ask the question in the general section.

but its saying unable to send will stay in drafts not what?

Go back under the connections under settings then edit the T-Mobile MMS you created
go back to the part for the modem
then edit the access point to "wap.voicestream.com"
then save, restart the device and try again. Chances are you have an older data plan that does not support the new access point properly.

k gonna try now and write u back.. thanks a bunch

If that does not work you can try to download and install this cab.
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
After you install it then soft reset your device.

ok ima do that now , stay with me lol. i tried wap and epc and neither worked..

Try starting two more threads and see if you can attract more attention to the same issue.

k all i did was downlaod that cab u said and when i installed then rest and tried to send the pic again it didnt even try..it went straight to unable to send. now what?

i downloaded fro mthe wingster thing u said and reset after i installed and tried to send it and it didnt woprk this time it went straight to saying unable to send saved in drafts..it didnt even get a chance to try and send..so what to do now?

OK now go back through and check all the settings and make certain they are all correct. Also make certain that no new settings have arisen. If you find some new settings let me know what they are and I will see what I can do.

i tried the wingster download cab, installed it reset the device and tried to send a pic again. and it went straight to sayng unable to send saved indrafts.. what to do now guys?

so with that cab download my mms settings under the server say gateway 216.155.165.50
port:8080
address is http://mms.msg.eng.t-mobile.com/mms/wapenc
conncet via internet
send:300k
wap:200
so i installed that and reset and it must have changed my stuff..

ok. just change the connect via to "T-mobile MMS" and then reset and try again
Also did you configure your device for internet? If not then make a new connection and set the access point to "epc.tmobile.com" then use that instead of "T-Mobile MMS" for the connect via part. It will eliminate the need to switch between access points when you have an open data connection.

k doing it now. let u know ina sec, appreciate it! (=

still unable to send it says, after i put that cab in,installed it reset my phone..told u my settings were changed when i reset it..u said change it to tmobile mms...then reset tried to send again and got the same dumb message lol..whats going on...i had the wap.voicestream.com in there and it didnt workthen triedthe epc.tmobile.com and sent a pic and it didnt work..whats wrong with it? is it because i have a europe version 6.5...everyone has these custom roms...my energy and all this other stuff...idk...

I'm not really certain. I can do a little research in the morning and see what I can come up with. I may just have to flash what you have and see. I know that the energyRom series works very well if you want to try a custom rom. I use them on my personal Touch Pro 2. Now with them I have found that after it does the automatic configuration for T-mobile you will have to apply that cab file to be able to send MMS properly.
Use the search tool and see if you can find a similar situation to what you are describing under the rhodium section. I have not come across this situation but someone else may have.
Here is one solution I just found using the search. Give it a try it may work for your situation.
http://forum.xda-developers.com/showthread.php?t=576903
This is another cab file you can try and see if it solves your problem.
http://www.grundy.name/release/TMo_MMS_Settings_Fix.CAB

ok well i just dont know how to flash ones that are custom again..i wa shaky trying the 6.5 in the first place...can u tell me step by step again what i have to do..id rather use them and use the cab file and it work then have this europe copy that no one has cab files for bc everyones using custom ones..idk which custom energy rom to use...whats the differecen in them..i seemthem all on this forum. which should i pick..ima girl so i wanna cute one ...lol if u can help me..and do i needa hard spl again when i already did the first time or can i just flash the rom without hard spl.

Related

Debranded MDA Compact II ROM, 'Qtek' Style

now obsolete
new aku2 here
http://forum.xda-developers.com/showthread.php?t=279908
so am i right in presuming that the gprs settings and phone settings are present in the rom? if not, how do we find them?
ALSO:
T-Mobile are releasing a rom update this month (ie this coming week!) so it might be worth looking at what they have done, not just for wifi fix but any other maintenence changes. Apparently they do alot of testing on their roms so there might be useful stuff there.
t-mobile gprs and wap settings are part of the extended rom. the 3 cabs files that begin CAB-Customization-...
i didnt include them as i'm on O2. This is more like a 'Qtek' version for the charmer, a universal version. doesnt include any operator specfic content.
looking forward to that update, hopefully its aku2, everyone else is releasing theres at the moment.
SDIO
What about SDIO drivers in this debranded OS?
so if i back up my current rom cabs and then install this, if it all goes pearshaped, i can relaod the origional and not end up with an expensive paperweight?
i wanna do the deed, but am scared as hell with it being my first PPC and only a few weeks old at that.
but anything to speed it up, its like im running windows or something.......
oh!
:wink:
only way you could mess up is if you pull the plug or have a power cut! while uploading the new os. remember to backup all your contacts and stuff as you'll need to hard reset.
you can start all over again if it doesnt boot or something by using the install package on the t-mobile site
http://t-mobile.iris-global.com/download_manager_mda_com2.html
just go into the phones bootloader, with the phone off, hold down camera and plug in the sync cable until the 3 color boot screen comes up and run the install package to go back to factory.
It worked!!
Dear dave106 and all;
i tried your fantastic upgrade yesterday. This was my experience:
1- I works like charm!
2- you might find it easier to use Total commander to uncheck 'system' and 'read-only' in the properties of the windows folder on your charmer, before Unlocking CID (to avoid any error).
3- alternatively you might use Lockiwiz 2b from this forum to unlock and unlock CID first.
4- the ROM upgrade went fine, showed some error messages on the charmer screen (nothing to worry about) but did not indicate an end. I unplugged it after 20 minutes. It rebooted on itself et voila, it was up and running.
5- Changing the boot scrren went very smoothly.
6- I noted that the T-mobile customization (after the new config.txt) did not install at all. I had to manually install the CAB listed in the config.txt file to reload the MMS and GPRS settings.
But now my charmer has no T-mobile crap on it...
However, i did not notice any dramatic change in speed....
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
supreme2k said:
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
Click to expand...
Click to collapse
thats a wizard, so you can just cid unlock it and install the imate or qtek wizard roms. the mda compact 2 is unique to t-mobile no other operator has it.
aeh....your sentence sounds strange to me, is it possible for my device or not ?
supreme2k said:
aeh....your sentence sounds strange to me, is it possible for my device or not ?
Click to expand...
Click to collapse
lol, in a word, no.
i am from czech and i dont understand all of this.
This is OK? or only any idea..
is really decustomization my mda compact II? I have tmobile
(i dont can it)
i flashing new rom....
after 10minutes say my mdac "aplication repllog.exe dont start"
...update is OK, and i have second problem
when customization is start it said " \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB"
DOESNT IT, I DONT HAVE THIS FILES IN EXTENDED ROM ++
and third problem, my storage card doesnt work ( i have2gb pretec...
only after the update
dead link
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
funkus said:
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
Click to expand...
Click to collapse
Funkus,
did you try wifi sdio with this debranded rom?
tnx
Re: dead link
Dzim said:
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
Click to expand...
Click to collapse
try it now, some tit nuked the uploads again
Got the Rom Working, the difference is quite noticable. Re wrote the extended ROM to auto customise just enough to get the MMS and GPRS to work correctly. Did any one work out if a WiFi card SD card will now work?
Would like to know before i buy one!
Re: dead link
dave106 said:
try it now, some tit nuked the uploads again
Click to expand...
Click to collapse
Thanks a lot, I have spent few hours searching the Web for this file, but couldn't find it. Thumb up!!
Dzim
aWizard not reconizing os.nba
Hi,
have followed instructions as above but when I go to write new rom it can't find os.nba.
Anyone have any ideas on what i'm doing wrong or what to do next?
I'm a noob, obviously :roll:

updated roms but cant connect to cingular

okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
But I cant connect to cingular(use my phone)
somebody please lead me in the right direction.
thanks.
iamviolet said:
okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
somebody please lead me in the right direction.
thanks.
Click to expand...
Click to collapse
Go to Cingular's website and click on support select Cingular as the manufacturer, select 8125 as the phone and then follow the instructions for GPRS and MMS setup. Most custom roms don't have this information built into them and you have to re-enter or find the cab files to install. Though if you used an official Cingular ROM then you should already have these settings provided you let the carrier customization files run when it was first booted after the flash.
Search for the following two specifically:
P_Conn_CWS_APR12_Wizard.cab for GPRS
cingular_mms_964.cab for MMS
Both of these are included in posts and should be easy to find
Since you flashed WM6, you may also need ARCSoft too.
I keep this post bookmarked
http://forum.xda-developers.com/showpost.php?p=1120703&postcount=5
thanks got it all working
well almost everything
mms email messaging
i believe thats the right word .
for emailing....
what am i missing again?
thanks
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
sdpnoy said:
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
Click to expand...
Click to collapse
I am sure there is/are cab file(s) around. I do know that if you go to the T-mobile site and follow there instructions there is a bad IP address in one of the steps.
it is something that contains a .050 as one of the octets. If you enter it as it is on their site it won't work. Change it to .50 and everything works fine.
checked the website
but in order to get to the download center i have to have a valid tmobile number.
iamviolet said:
checked the website
but in order to get to the download center i have to have a valid tmobile number.
Click to expand...
Click to collapse
Curious, why do you need T-Mobile GPRS settings if you don't have a T-Mobile account?
someone gave me wrong advice..
still trying to get my 8125
underground edition.
to use MMS..
any help would be appreciated.
If you are on Cingular, try the cabs mentioned above. Or just go to the Cingular support site and they show the settings for MMS.

GPRS not working after upgrade to new HTC rom

Hi, I´m from Spain . Thanks for read this thread
I have a problem with my HTC Diamond. It was working very good with a cooking rom but after upgrade with the new original version from HTC don´t work GPRS connection.
I tested first with hard reset and second ,changing differents radios and spl in the way to found an answer for my problem but I didn´t found it.
I was checking the connection data from Orange calling him and calling HTC support directly. I thinked that it was wrong but I saw all was correct.
I created the connection manually first but it didn't work. After it, I erased all the connection, then I did a hard-reset and finally I created a new connection with automatically HTC Connection setup chosing Spain-Orange, but it did´t work either.
I was looking for this problem in the forum and I tested to flash again the mobile with the update 2.03 rom and after it made a hard-spl and write another radio without success.
I tryed too with Wifi Profiles cab like I read in another thread without success either.
I have not installed any program like "nodata" to cut the gprs connection.
I get always the same pop-up. "..... can't connect... unkown reason....."
Please Is there any way to fix it???.
Thanks in advanced
I had exactly the same problem immediately after upgrading to the 2.03 rom, it made me crazy I tried everything, I even thought having disabled gprs with no-data the day before the upgrade screwed something up but in the end I called my provider (Telia-Sweden) and they re-activated the gprs data account and it's been working fine since then
Very weird but I'm glad I made the call.
Thanks owziee for your quickly answer, . I was speaking with Orange to re-activated the data service and they did it. Before it I went to an Orange distribuitor shop to upgrade my sim-card for if it could be an incompatibilty between the phone with the card
New sim-card. New re-activated service and it still not working.
HTC told me that it could be by a corrupted data in the WM and they think it can be fixed flashing again the phone to update it in a service center.
I was thinking about it and sincerelly I have a dude for if I have used the correct spl and radio flashing the phone.
I made hard-spl sometimes. I used differents files but always unsigned spl.
At this moment I am trying "1.93 signed" without success.
The file I use to update the phone is:
_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SPA_2.03.412.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
Please, What could be the way to fix it??
Thanks in advanced for your answer..
WondiW
I still thinking about my steps....
Uhmmm, could it be by the method used for unlock it???
I remember that I unlock it but I press to write CID to 00000 too.
Is there any method to calculate the CID to write again for it is the problem???
I don´t know what I must to do. I have tested some minutos ago the htc rom 1.93 version without success.
Thanks again

MMS problem, Need some advise

ive searched all over in how to fix this with-in my own ability, i saw there was a cab that installes the settings into the handset. trying the cabs (pay and go as thats wat my sim is) this has not sorted the problem.
getting down to the problem in hand....when i go into the messages and select menu, then mms options and select it the settings dont come up. i am using a cooked from (phenix energy rom 3.0)
if anyone can help me with how to solve my problem then that would be exerlent.
looking forword to the help.
cheers
Mmmm...
All I can suggest my friend, is to check the Pheonix Energy ROM thread to see if anyone else has that issue with that particular ROM. If you had MMS set up and working OK before you installed the cooked ROM, then there's your answer
still no joy
i have tuck your advice and no one like to reply in that thread, i have recently moved to another rom but still the same problem, could it be anything to do with the radio or anything like that? or wud flashing it back to its stock rom help?

Please Help Me Change SEMC-X1 into HTC-Raphael >.<

What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot
I don't have suggestions, but I am curious, what advantages do you get by using BB Connect of BB Application Suite? Is there any gained functionality over what WM offers by default?
BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation
Hi M4G1C14N, I'm trying to find out as well, I'll post if my search is fruitful, please share if you find some way to do it as well..
Thanks
M4G1C14N said:
What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot
Click to expand...
Click to collapse
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know
Shazad.K said:
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know
Click to expand...
Click to collapse
Hi Shazad, if you take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=632147
They have managed to extract BlackBerry application suite(Full BB on WinMo), however it only works on HTC-Raphael, the Installation program and the application itself will check before starting for modelId, which in the X1's case is HTC-Kovsky (or in his case SEMC-X1). Regardless of the name, how can this modelId be changed.
In some of the threads they use a utility called SetModelId.exe, however that doesn't work on the X1.
You can check this post as well:
http://forum.xda-developers.com/show...&postcount=117
M4G1C14N said:
BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation
Click to expand...
Click to collapse
Why could you not use MSN while using BBC? Try to search for Multi APN connection that solve it for me I would love to have full bb on my x1 as well or at least i would love to use BBC on a cooked ROM, thats why i'd like to know the answer for your question as well.
I found something, search for 'hex editor blackberry connect' and hit the 1st link it'll give you. The method described there is way too dificult and time consuming for me :/
Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1
zelduy said:
Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1
Click to expand...
Click to collapse
BTW did you get BBC working on a coocked ROM on x1? (6.5.x etc
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
you can install BAS in X1??
M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
Of course i've tried that but with no success i gave up when i had on like 10th try of different combinations always HEMC-X1 instead of SEMC-X1 in BBC. Also i found HTC-Kovsky there twice, which one do you usualy changing to get BBC working? 1st one or the 2nd one? From your link i can see that you've change it for HTC-Raphael - that works with BBC? - This might be the solution for my hassle.
HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)
I've been using BIS for long time. what i wanted was to use a rom with htc sence in it but all of them which are available has got HTC-Kovsky as ModelID. It would be great if you can tell me how exactly you change HTC-Kovsky to SEMC-X1 when you say it is easy. On which ofset have you made the changes? Did you change both entries or just a one? Whic one then? I've tried that usong the hex editor but the best i could get was HEMC-X1. Please man if its easy for you then tell me thanx. S.
you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106
please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?
cq0dq said:
you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106
Click to expand...
Click to collapse
This worked mate. Thanks a lot
M4G1C14N said:
HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)
Click to expand...
Click to collapse
I've done it as above... (changed my model ID from HTC-Kovsky to HTC-Raphael.) ...and Blackberry Connect works, have 'Security died unexpecty' sometimes after reboot, but battery pull sorts this out. I'll try to install BAS when i have a time and let you know how was it...
l0rdsheva said:
please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?
Click to expand...
Click to collapse
Check the 1st post of this thread, for BB Connect the ModelID has to be SEMC-X1 (original ROMs) or HTC-Raphael (your custom ROM will have probably HTC-Kovsky as its ModelID so you have to use the HexEditor from the 1st post to change it to HTC-Raphael, i've done it and it works) also don't forget to change the AKU to 1.6.3 when using custom ROMs (i did not have to change it when using original latest ROM and i did not check its version as BBC was working straight away) you can find it in registry (use a registry editor, i use the plugin in Total Commander) HKLM/System/Versions/Aku - just change the value from whatever is there to .1.6.3
When using BBConnect than you'll probably need to use multiple APN connection to be able to use BBC in the same time as other aplications which requires a internet connection (internet, IM, Weather or GPS updating etc..) For this check this one:forum.xda-developers.com/showpost.php?p=2382465&postcount=37
ok, changed device name and now flashing, hope it'll run! thanks in advance!

Categories

Resources