Related
When i install a program it's no longer possible to remove it under remove programs. Only thing i can do is remove the program under activesync. Do i miss something in the startup of my Tytn II? A program or shortcut that record installing programs?
Maybe someone can post his startup folder for instance so i can compare what i'am missing?
Could you elaborate? what do you mean "it is no longer possible to remove programs"? Do the progs not show up in your remove prog list on your Kaiser? Or do they show up, but do you get an error when trying to remove them?
Also does this happen to ALL programs or just some?
- Wouter
nispen said:
Could you elaborate? what do you mean "it is no longer possible to remove programs"? Do the progs not show up in your remove prog list on your Kaiser? Or do they show up, but do you get an error when trying to remove them?
Also does this happen to ALL programs or just some?
- Wouter
Click to expand...
Click to collapse
They don't show up under installed programs and it happens for all programs.
Wow, weird.
Afaik there is no program (launched at startup) that monitors installations. Sorry man, have no clue what is going on.
- W
marco899 said:
They don't show up under installed programs and it happens for all programs.
Click to expand...
Click to collapse
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
grandpareza said:
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
Click to expand...
Click to collapse
I myself have been trying to find a way to completely replace the Today screen with PointUI, but without any success. So I ended up throwing together this little piece of software.
It is called GetPointUI and is basically a Today plugin, which acts similar to the SPBWatcher plugin. If PointUI is not running, it will start it, and if PointUI is running, it will activate it as soon as the Today screen becomes visible. To deactivate GetPointUI, simply uncheck the plugin in the Today settings.
Now, mind you, I have only tested this application on my XV6800 (and it is working perfectly) with PointUI installed in the default location. I do not have S2U and/or any other launchers/Today replacements installed, so GetPointUI might interact with those in an undesired way. If you should have PointUI installed in a non-default location, GetPointUI SHOULD be able to detect that and find the correct path, but this has not been tested. The same goes for new versions of PointUI that might be released in the future. GetPointUI SHOULD always bring up the latest version, but again, that is pure theory. I am curious myself...
Installation: Just install the attached CAB and soft-reset your device.
NOTE: I will NOT be responsible for any damage on your device or any data loss you may incur. You are using this software at your OWN risk.
Unfortunately, that CAB file you posted won't install. No error, just "Unsuccessful"
here this may have fixed it
Perfect. Thanks guys. Since the time of posting (January), pointui has created a feature where you can choose to replace the Task Bar/Start Bar with the pointui task bar. Touching this "pointui task bar" takes you back to the home screen and at another location on the bar it gives you the "Running Applications"
Thanks again guys. Much appreciated.
kidnamedAlbert said:
here this may have fixed it
Click to expand...
Click to collapse
Thanks kidnamedAlbert. I should have noticed that.
mimpoca said:
Thanks kidnamedAlbert. I should have noticed that.
Click to expand...
Click to collapse
yeah no problem
Still not working for me. Any suggestions?
getpointui not tinstalling
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
hello,
i tried this .cab on PPC 2000SE - it installs - but nothing happens
- no new plugin
- going to today (and stay there) is still possible.
is there a way to make this work on 2003SE ?
thank you!
GetPointUI not installing...
chrisaba1 said:
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
Click to expand...
Click to collapse
I have an HTC S640 with Windows Mobile 6, I get the same error...will not install. Without this app, PointUI although very slick, without it beeing able to work like this its just eye candy....
If anyone has this working, please POST!!!!!
i know this is off the topic, but does anyone know if POINTUI is still in production for a new release?
it is true there are bugs in pointui, but free is free.. for the most part, POINTUI is a excellent all in one interface, simple, basic and fast...
tvos
I really don't understand because of all the screen shots I have seen but today I got my diamond and I only have the double keyed keybord ,but I want the full,usally in the screens shots there is a boten that you press and it changes the keybord.But i don't have it,so I went to settings keyboard and tried changing it to full qwerty,but no luck,can anyone help?
There should be a triangular looking icon next to the keyboard icon when you are in texting/email/document/etc mode. You click that icon, then a list pops up for you to select the input method.
I'd like to think that you've looked through the included instruction manual...
Thanks man,a minute after a posted this thread a have read the manual ,so Im embarrassed to say sorry for posting this
same problem...
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
darrelluk said:
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
Click to expand...
Click to collapse
Might not work.. but just a suggestion, try it out if you have the time.
Recalibrate the screen.
Start - Settings - System
Screen
It's a long shot.. but hey.. you never know what might work.
tried that...
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
darrelluk said:
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
Click to expand...
Click to collapse
I have the same problem and there's another thread on this subject. There seems to be a few people now with this but no solution yet. If you look on the other thread, there is a utility called SIPChange which will allow you to make sure you get the "right" keyboard you want as default but in terms of selecting from the little arrow, forget it (until someone can work out which registry entries are causing this).
Gary.
...
Hi Gary,
Thanks for the reply...
I have been trying to figure it out all day...
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
iggy said:
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
Click to expand...
Click to collapse
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Davey101 said:
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Click to expand...
Click to collapse
Thanks Davey101, tried the default 10secs, then 20secs and it did not work, after your advice I switched to 30sec and softReset, then 40sec the same affect.
Then I remembered in my Apache their was always a sipchange shortcut in Startup and when I checked the Diamond their was none, so I created one with the Set parm as my Apache, softreset and I am good to go.
I recently installed the latest version of Opera Mobile (build 16194). It works fine, and I love it. However, every time I soft reset or reboot the device, Opera starts automatically. I checked the startup folder in Windows and did not see anything that would cause this behavior. Does anyone have an idea as to what is causing this and how I can fix it?
rogatsby said:
I recently installed the latest version of Opera Mobile (build 16194). It works fine, and I love it. However, every time I soft reset or reboot the device, Opera starts automatically. I checked the startup folder in Windows and did not see anything that would cause this behavior. Does anyone have an idea as to what is causing this and how I can fix it?
Click to expand...
Click to collapse
Hi,
would you have by any chance have a .lnk that would be related with a application/webpage in your startup folder. It happen to me when I've installed Bell SelfServe and it created a .lnk into the startup folder. This app for example give you the ability to view your cellphone bill over the Internet, so each time I softreset, the app started which started Opera.
Let me know if this is the cause
TruPlaya187 said:
Hi,
would you have by any chance have a .lnk that would be related with a application/webpage in your startup folder. It happen to me when I've installed Bell SelfServe and it created a .lnk into the startup folder. This app for example give you the ability to view your cellphone bill over the Internet, so each time I softreset, the app started which started Opera.
Let me know if this is the cause
Click to expand...
Click to collapse
This is what is in my startup folder:
Autoshortcut.Ink
CommManagerStartUp.Ink
HTCStartup.Ink
iLock2.Ink
Paneldefault.exe
panelmanager.Ink
PKG.Ink
poutlook.Ink
sdim.Ink
SMSReceiver.Ink.
I tried moving the following out of the startup folder:
Autoshortcut.Ink
PKG.Ink
sdim.Ink
But after resetting, Opera still starts automatically.
You have a ROM with push internet - disable it and this won;t happen.
akp99 said:
You have a ROM with push internet - disable it and this won;t happen.
Click to expand...
Click to collapse
Thanks, but my push internet slider is set to the off position, and this is still happening.
I wouldn't trust the slider - check HKLM\Software\HTC\PushInternet and ensure Enable and EnableNotification are set to 0 and go to \PushInternetStatus and make sure "TaskCanStart" is set to 0.
akp99 said:
I wouldn't trust the slider - check HKLM\Software\HTC\PushInternet and ensure Enable and EnableNotification are set to 0 and go to \PushInternetStatus and make sure "TaskCanStart" is set to 0.
Click to expand...
Click to collapse
You, sir, are the man. It was enabled in the registry setting just as you said. All is well now. Thanks.
akp99 said:
I wouldn't trust the slider - check HKLM\Software\HTC\PushInternet and ensure Enable and EnableNotification are set to 0 and go to \PushInternetStatus and make sure "TaskCanStart" is set to 0.
Click to expand...
Click to collapse
i could not found "PushInternet". i'm using mobile 6.5 and opera still start on device restart.
please help, thanks.
junkdealer said:
i could not found "PushInternet". i'm using mobile 6.5 and opera still start on device restart.
please help, thanks.
Click to expand...
Click to collapse
Try HKLM\Software\HTC\Manila\InternetPush\EnablePushInternet set to 0.
akp99 said:
Try HKLM\Software\HTC\Manila\InternetPush\EnablePushInternet set to 0.
Click to expand...
Click to collapse
Up to 10 mins ago I had the same issue about selfstarting Opera ... and
I SOLVED IT !!!
Go to HKEY_CURRENT_USER\Software\HTC\BootLauncher\Apps\
And delete \Opera9
That's it ... NO MORE bloody Opera start on reboot