Database Develop

Restore Original Hard-SPL

Hi at all,
I had uploaded on my P3600 olipro spl 1.30 but now I need to send my P3600 to laboratory for assistance. I need to restore the original SPL. Where can I download it?
thk a lot,
Dormone

You need to check the wiki and download the latest offical rom for your phone, then proceed to flash it via sspl which should then overwrite the ipl/spl/splashes/etc all back to stock for your carrier.

thks for reply,
I had download the last official rom from htc club updated 30-07-07 after upgrade I checked pressing power button + camera button + soft reset but olipro spl is still present.

You flashed it with the included updater in that case, you need to put the signed file into one of the other update packages we have at this site, those use sspl to "force" a update of the ipl/spl even when hard-spl is blocking it...

thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone

dormone said:
thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone
Click to expand...
Click to collapse
What sspl? The ruu modified?

I'm not expert but I had read this post http://forum.xda-developers.com/showthread.php?t=293632 after I copy the file sspl.exe in the pda and execute the file. follow i had upgrade the original rom and al was ok also the bootloader.
bye,
Dormone

Does anyone have SPL 1.94

Hi guys. I've got a problem with my Kaiser and so have to return it for warranty repair. I've reflashed the original rom and radio but can't find the 1.94 SPL.
Does anyone have it or can extract it for me? I'd very much appreciate it
Thanks
Gav

GAVtheRAV said:
Hi guys. I've got a problem with my Kaiser and so have to return it for warranty repair. I've reflashed the original rom and radio but can't find the 1.94 SPL.
Does anyone have it or can extract it for me? I'd very much appreciate it
Thanks
Gav
Click to expand...
Click to collapse
the spl is in the original rom that you flashed. Give me a copy of the rom nbh and i'll extract it for you (or tell me what provider you have and i'll look for rom on wiki and extract it for you).

thesire said:
the spl is in the original rom that you flashed. Give me a copy of the rom nbh and i'll extract it for you (or tell me what provider you have and i'll look for rom on wiki and extract it for you).
Click to expand...
Click to collapse
The provider is 3UK but they've never released their rom. When I backed up my original rom I understood that I couldn't backup the SPL from the device so have been searching for it through the forums ever since. I've managed to extract SPL 1.93 but I'd prefer it if I could find a rom that includes SPL 1.94.
I think the WWE roms 1.56.405.5 and 3.02.405.0 each had 1.93 so when I get a chance I'll try 3.10.707

I extracted the SPL from all the HTC roms up to version RUU_Kaiser_O2_UK_3.29.206.0_radio_sign_25.83.40.02_1.65.16.25_Ship on the wiki. I flashed each SPL to the device and each time it reported the SPL as being version 1.93 which doesn't seem right so I'm wondering if it's not updating the SPL on my phone correctly

how to remove orange software from htc blackstone?

Hi.
I have the htc blackstone locked on orange. my rom version is 1.19.61.1. i want to remove the software of orange and reinstall the windows as it was from htc company. like a new phone from htc. What to do?
Thanks.

use USPL to flash a WWE official HTC ROM
Please bear in mind this will affect your warranty with orange....
Do a search on this forum for USPL to find out what it is and how to use it

thanks
the hardspl and uspl are diferente?

Loucas4u said:
the hardspl and uspl are diferente?
Click to expand...
Click to collapse
HardSPL will actually install a new SPL to your phone, USPL will not. The advantage of using HardSPL is once you've installed it you can flash as your please to any ROM, when using USPL you must run it every time you want to install a new ROM.
The benefit of using USPL is the official SPL is still installed making it easier to make warranty claims etc.

Flashing official ROM: need to revert SPL, radio to original?

A few questions:
my diamond (mda compact iv) is hard resetting everytime i soft reset after installing the gen.y r5.5 sense 2.1 rom. i have hardspl 1.4.
i've spent all day today ****ing around with the phone. i think my next step is to try flashing an official phone, hard reset, then reflash a different rom, then hard reset again.
1: since it was originally a t-mobile branded mda compact iv, do i need to find the original t-mobile rom or can i just flash any official htc 6.1 rom?
2: do i need return all the spl, radio to the original as well before i flash to an official rom?
thanks.

Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.

freakzone said:
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
Click to expand...
Click to collapse
I have a problem with my Diamond, HTC USB Sync Drivers which i downloaded
wouldn't work, i can't extracted them. No archives found????

Hi and welcome to xda , what is the os on your pc. From what I remember the hotsync drivers were installed automatically. Try to download the rom again, maybe the RUU was toasted.

htc diamond touch 100 stops at 0% when tryn to flash hspl

htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030

You shud try SSPL method first to pass the HSPL. search for the SSPL here.

ayyu3m said:
You shud try SSPL method first to pass the HSPL. search for the SSPL here.
Click to expand...
Click to collapse
where should i search 4 it

here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)

Downgrade your radio to one below 1.02.xxxxx before hardspl flash

Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland

dominica said:
htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030
Click to expand...
Click to collapse
i have the same problem like but my SPL ver is 2.03.0000
the problem is that i cant use jumpspl anymore because i first tried to flash the device using MTTY so i formated my device and now i cant access its internal memory...can someone give me a rom for SPL 2.03 or tell me how to change SPL from USB because i can enter only in bootloader

magicdave26 said:
Downgrade your radio to one below 1.02.xxxxx before hardspl flash
Click to expand...
Click to collapse
pls help me with the steps to downgrade

Christoph21x said:
Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland
Click to expand...
Click to collapse
can u give me the site to download this files

ayyu3m said:
here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)
Click to expand...
Click to collapse
hi
write file jump and finish but error 260 for HSPL 1.93