I tried to flash a rom for my diamond after doing the hard spl, after the rom finished flashing and installation of the cab files finished I soft reset the device because it did not do it by its own, when resetting the words touch diamond and the three red lines appeared and that was it the screen froze and my diamond didn't do anything else. I tried leaving it for a while but nothing changes.
I urgently need help to fix this problem, with the complete steps to do so.
Thanks in advance
Same thing happened to me.
What I did:
1. Hard reset the diamond.
2. After installation of cab files finished i did not soft reset it.
3. Conected it to the ActiveSync
4. Flashed in another ROM.
i hard reset my device, many times but nothing happens. when my diamond boots up again after the hard reset it the same problem occurs again
i really dont know what to do
S.dahmy said:
i hard reset my device, many times but nothing happens. when my diamond boots up again after the hard reset it the same problem occurs again
i really dont know what to do
Click to expand...
Click to collapse
Put it in bootloader and flash the rom again. Then after the flash completes hard reset. Then let it boot and then install your cabs.
Related
I was using my pda(Kaiser) with factory configuration (no flashing) and one day i got a 3 color screen stucked with soft reset or hard reset not working.
Then I take out the battery, wait some minutes and it's came back.
But after some hours stucked again with activesync not working.
Now I installed the HardSPL but don´t change the ROM and i'm still with the same problem.
I can not install anything because the activesync doesn't recognize my pda and hard reset fail.
What can I do? Help!
I am searching xda about one week and didn't found any solution to my specific problem.
I installed the HTC Kaiser DLL replacement installer and then restarted my device. Now when it boots it won't go past the my info (owner info) screen. If I try to do anything at that screen whole device goes black and frozen I have to reset again. Anyone having this similar problem or know how I can fix it? I would really appreciate the help!
I was running WMobile 6.1 with the RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04 ROM
Once or twice somehow it got to the unlock screen but I can't get back there now I don't know how it got there the first times either just reset after reset.
Thanks
I was able to enter bootloader and reflash the rom. Held down camera button and used the stylus to push the little reset button next to usb port. Then ran rom updater as normal
hey guys,
need some help from the xpert here, my tilt cannot boot up its stuck on the AT&T screen, i have tried soft reset, hard reset and still cannot fix the problem. the worst problem is cannot sync into my pc...
thx
you sure you attempted to hard reset and still nothing?
take out your memory card and see if that does anything.
If it still won't boot up, then get into bootloader mode and re-flash your rom.
We need a bit more info to help:
1. Did you have HardSPL installed? Check by looking at the tri-colour bootloader screen (press and hold power/camera buttons and reset with stylus at the same time).
2. What ROM/radio do you have?
3. Did you try to flash another rom or radio before this problem hapenned?
4. When you hard reset, did you get the grey screen with instructions telling you to send to continue? Sometimes the hard reset routine doesn't always work properly.
5. Are you running XP or Vista on your PC?
Try going into the bootloader and connecting the USB cable. The screen text at the bottom should change from 'Serial' to 'USB'. If you have Hard-SPL you should be able to re-flash any rom (some here) - but check for compatible radios. If you don't have hard-spl try flashing the manufacturers original rom.
Hy guys, after some month with my diamond and (hundred of rom changed), yesterday my phone started to reset every few seconds without possibility to start windows ...
it's seems that or soft rest button is dmaged or something with battery fault. I've tried two different battery but no way.
I've tried to flash a standard rom but after upgrade there's error an no way to finish process.
Now it' s difficult also have a soft reset because when i push red button nothing happens. Sometimes without battery i'm able to go in a boot mode...but whe i put my battery phone restart as before....
So i'm desperate......
Any suggestion???
regards
You could try to format your device and then freshly flash a new ROM:
http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22
AAAARRRRRg my diamond is definitly briked.. I've tried everything to solve my problem but no way. It seems that i've a power button, so every time i put battery and start phone, after a couple of seconds i've reset in loop....
No way to take in boot mode....
There's a way to recover my data in "internal storage"??
Regards
When i do soft reset or turn off and turn on the device eveything erase! like am doing hard reset and the device start to configure itself again with all data erased :S
what should i do !
I think it has been solved...
I flashed rom back to one of the official ROMS then refalsh it with the cooked one!
same thing happened to me i did what is said exactly.. i downloaded an official rom then i flashed it now it works just fine as before ... thnx