Database Develop

how to remove recovery rom and revert to stock bootloader? [solved]

I have "RootTattoo1Click_Recovery_2010-03-18_Mvx" installed and running flawlessly. But now I need to send it back to service center for some HW issue and so I need to COMPLETELY remove custom recovery image and revert back to stock bootloader. How do I do it? I have the factory rom for my regoin with me "RUU_Click_HTC_Asia_India_1.67.720.8_release_signed_NoDriver.exe" which I got from "shipped-roms", should I simply run it?
PS: Sorry if it has been repeated, I tried searching and got a few results too, but I just wanted to make sure I dont have a brick

Simply install the stock rom and check if the custom recovery and bootloader have been set to default afterwards. Should solve your problem.

Look here:
http://shipped-roms.com/shipped/Click/
pick your carrier and country and flash - completly unroots/rolls back your Tattoo!

Hi.
I also had to give my tattoo away for display repair. They sent it to HTC in Hong Kong, and they returned it repaired (under warranty).
My tattoo was rooted with 1-click from Mvx, so I guess they don't even check it or they don't care.
Best regards

They usually re flash first thing anyway. They did mine when it had HW repair. They have done the same for previous HTC devices I had to.

jitin_s said:
I have "RootTattoo1Click_Recovery_2010-03-18_Mvx" installed and running flawlessly. But now I need to send it back to service center for some HW issue and so I need to COMPLETELY remove custom recovery image and revert back to stock bootloader. How do I do it? I have the factory rom for my regoin with me "RUU_Click_HTC_Asia_India_1.67.720.8_release_signed_NoDriver.exe" which I got from "shipped-roms", should I simply run it?
PS: Sorry if it has been repeated, I tried searching and got a few results too, but I just wanted to make sure I dont have a brick
Click to expand...
Click to collapse
hi
assuming ur from Asia India
u can take the above mentioned rom from here
Link : http://dl.dropbox.com/u/10031257/RUU_Click_HTC_Asia_India_1.67.720.8_release_signed_NoDriver.rar
Note : this has to be flashed from ur PC via usb cable this is a exe file OK
hope it helps

Thanks everyone! I installed the suggested ROM exe and all well
Although I'm soon trading my beloved tattoo for X8, i know not a powerhouse, but I like the looks and presence of GPU is gonna be a big deal for me! But nothing can match customizations of HTC sets. Also, tattoo has an awesome community and awesome devs. CHEERS

[Q] Bell i9000m Official 2.2 Froyo Upgrade Question(s)

So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?

Funkadelick said:
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Click to expand...
Click to collapse
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4

BlackDino said:
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
Click to expand...
Click to collapse
how do you root jk4 then ? 2.1 eclair on bell i9000m

1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?

Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
A lot of people have been complaining that their SD cards have been screwed. Luckily mine went through without any problems and hasn't given me any trouble so far.
Froyo is insane tho, before the phone used to lag a bit, now the moment i touch it it opens. No need for lag fix in my opinion, everything works blazing fast as is.
One thing to watch out for is the WIFI. It was working normally at the beginning but after 3 hours it just disconnected for no apparent reason and has trouble connecting back.
Good luck

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe

urfase said:
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Click to expand...
Click to collapse
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.

Videonut said:
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Click to expand...
Click to collapse
1) but will it erase root upon upgrading?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Yep, but for optimised result, this is a must do!
You can probably have it work without doing a factory reset, but you can encounter weird behavior, bugs and stuff!
Anyway, you might end up doing it anyway to solve the firts boot issue

I'm one of the users who upgraded to Bell Froyo (from stock FW with root and lagfix - undid the lagfix before upgrading) and then encountered the broken internal SD card issue. I ran Volume UP/Power/Home(middle button) to reformat everything and it is up again. Inside the OS, I ran the internal factory reset again. So far so good. *crossing fingers*

I updated mine last night. However I've had major problems since. Initially it would just freeze up randomly and require removing the battery to get it back up and running.
Today I decide to reset it to defaults which seemed to go fine, although shortly after getting it all setup again, some Samsung app of sorts came up with an error and had to be forcefully closed. Then I was left with a black screen and only the notification bar.
Powered off the phone and went to turn it back on, and now it just loops through the Samsung GT i9000 screen (white writing). Not even the colourful S logo comes up.
I'm able to get it into Download Mode but not Recovery Mode. I'll have to do some reading about this Odin stuff tonight. Hopefully I can revive it, otherwise I guess I'll had to send it in for repairs. No idea if Virgin Mobile repairs will go through Bell or if I take it to them directly.
This is my first Android phone and I've only had it for just over a week. I thought I was making a good decision, but now I see it has quite a defect with the internal SD card failing.

Slow after upgrade
I upgrade my phone last night ( as per bell and Samsung) It is now slower than before. Quadrant Standard has it under 900.
Any ideas how to fix it?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Just use SuperOneClick after you upgrade to Froyo, I've tested and have root on JK4
http://forum.xda-developers.com/showthread.php?t=803682

I have an unlocked phone from Bell that I already upgraded to the international (or European?) JPP/JPO 2.2, what is the best way to downgrade or restore back to default firmware before using Kies to get the official update? Does factory reset restore stock firmware?

I upgraded to official Bell froyo last night ..thn rooted.But how can i Unlock now? i tried using SGS unlock app it says no unlock codes found?? Please help

God damn samsung and bell!
it seems like they're giving defected phones to their costumers!
I have the corrupted sd card too, took it to guarantee now it takes more than 1 month to fix this!
this is f-ing xmas for god's sake. i want my phone

Same problem here!
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.

ciudadbonita said:
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
Click to expand...
Click to collapse
Have you found any solution yet?? I am thinkin to flash back orignal samsung firmware using Odin n then unlock..atleast i will be able to use the phone then

Videonut said:
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
Click to expand...
Click to collapse
what if after this, it's still stuck after the s logo boot up?
does this mean i have a broken internal sd?

[Q] Stuck on logo screen suddenly. Ideas?

Hi,
Last night my Galaxy S was low on battery, and I kept trying to turn it on for it to die right away (it was working as expected I guess)
This morning after I charged my phone it wouldn't turn on at all! It loads to the logo screen, makes that jingle sound and then holds and doesn't turn on.
I can get to recovery and download mode.
I put OCLF on like 2 months ago, but haven't modded/flashed ANYTHING since. It is very bizarre how it just died.
I'm wondering what my options are now. Obviously I would rather not loose all my personal files. Since I can get into download mode, can I just flash a new firmware? I'd like FroYo anyway, but I haven't got a clue what to do.
Great start to the year – !
Cheers,
Mitch
EDIT: I just decided to try the "Clear User Cache" option and then reboot to no avail. Now I can't get back into recovery mode!?!? Download mode still works. Huhh?? Is this expected? Have I lose Recovery Mode entirely now? Crap.

seeeems like an odin flash via the download mode is the only way. There are a few tutorials on this site and even tut vids on youtube so you should be fine if you just follow everything they do (as long as it works for them of course)

How do I know what version to flash? I have read a few tutorials and they all have started with "Dial x and check you have y" etc. Obviously I can't do any of that.
What is the *safest* firmware I can flash?
My phone currently has some optus variety.
Please forgive the noodish question.
Mitch

Where are you located? And who is your provider?

Hi,
I'm in Sydney Australia and my provider is Optus.
Thanks

Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You

m1tch37 said:
Hi,
I still can't get my phone working and am not clear how to proceed.
What would be the best firmware to flash to my Optus Galaxy S that bricked out of the blue? Should I just send it back to Samsung?
Thank You
Click to expand...
Click to collapse
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.

Sounds like you'll need to do a flash of a stock rom..
By the way, the old oclf had some issues that might lead to system corruption (unfortunately I'm not very sure exactly what it does, or whether it could lead to this problem). I'd suggest getting one of the newer lag fixes available here when you do get your phone running again

tragusman said:
Hey mate go to samfirmware and get I9000DTJG4 thats the stock optus rom once you get phone up and running then upgrade to 2.2.1.
Click to expand...
Click to collapse
tragusman has got it right. Depending on what the issue is, you'll either recover nicely or your phone is toast. Flash the above stock firmware and give it a shot. Note that you'll likely loose your data and settings.
If you're new to flashing firmwares, check the great reference guide on where to find Odin and how to use it (this is the app you'll use to flash the above firmware).
http://forum.xda-developers.com/showthread.php?t=723596
After flashing, try getting into recovery mode. If you can look for an error message under the standard menu. Can't get to d/l mode? You're probably in trouble. Get into recovery and see an error msg? Post the error here or google it for a solution. No error msg? You're probably ok - restart the phone.
Good luck.

Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch

m1tch37 said:
Thanks guys.
I'm about to try it now, but before I start potentially breaking my phone even more, I was just thinking: Could I just send it back to Samsung? Would they fix it, or identify right away I have changed something and void my warranty.
Mitch
Click to expand...
Click to collapse
If it's broke, you can't break it any more I've sent phones back in for support after flashing back stock firmware (flashing it after it "died").

Camera force close

Hello all,
I attached a log file which i hope, i BEG someone can help me with.
My camera wont open, i click the camera app and the screen goes black then i get a force close message, or a message saying cannot connect to camera. Sometimes the app opens and i get the cannot connect to camera message and sometimes it just force closes with a black screen.
I am on the stock 2.3.6 rom. i have dskchked the sd card, formated the sdcard and started over, tried different camera apps.
Attempted a different rom but i cant seem to get the drivers to see it when i start in fastboot USB mode. :-(
Can anyone tell me whats up?
Thank you
I really miss camera :-(

Well, since you said you already flashed a differenct ROM to see if it would help I'm going to assume it was something you know is stable like cyanogen or a stock ROM so it should work but just in case if you haven't already I would try passimg. Now you haven't done any radio flashes lately right?? Although from what you have said I think it may be hardware failure :/

Thank you for your reply, no i havent its on the 5.08 radio i believe, its changed to the defualt stock when u OTA right? i lost the works when i did an OTA to stock 2.3.6. I have just put recovery back on. i had CM7.1 before and it wasnt working, but it was working before that on stock 2.3.6. If you can picture that timeline. I thought reverting to stock would fix it. but apparently not.

Ok well when you reverted to stock did you use passimg? if not then I would give it a shot but if that doesn't fix it then I think it's a hardware failure sorry :/

I just flashed GRI40 using recovery then OTA to 2.3.6.
Is that any different to passimg??? im not sure of the difference?

Well it's because passimg by default makes a flash to every partition so it will wipe everything and put it all back in flashing a ROM on the other hand just does the system partition.

right... sounds interesting... can i passimg over the most current version... as im on the latest now... Or will it just say its up to date?

No unfortunately the most recent passimg file is frg83 so you'll need to use that but if it works then after that you should be able to flash anything you want and have no problem. For the instructions just check my sig.

worth a shot i guess... i just apply the froyo passimg and it just instal over 2.3.6, then it will naturally OTA to the latest again...? u recon it will work? shame their arent more people confirming this... its a lot of work!

passimg solved the touch pad buttons at the bottom problem i had of them not lighting up, unfortunatly the camera is still not working

alphecca911 said:
passimg solved the touch pad buttons at the bottom problem i had of them not lighting up, unfortunatly the camera is still not working
Click to expand...
Click to collapse
well if it was working perfectly before
than if u can open ur phone check all connections or go to some repair shop and get it done,
this might solve the problem.

this solved my camera FC problem
http://www.ebay.com/itm/31037916447...X:IT&_trksid=p3984.m1497.l2649#ht_1535wt_1185

[Q] Bricked L90

dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.

You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.

linasj said:
You have probably the worst case of them all. I suggest you to take your phone to warranty and see if they can replace it (because there probably isn't any way to fix it). If your warranty is void, then, I'm afraid, you will have to get a new device. I have had this issue myself, and it was solved only by replacing whole internals of the phone. Good thing that I still had my warranty, so it didn't cost anything. Good luck.
Click to expand...
Click to collapse
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?

wmosquini said:
but this happened to you because of flash ROMS? How long on average it took for you to get the unit back?
Click to expand...
Click to collapse
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.

linasj said:
Yes. I tried to flash a ROM (which requires an unlocked bootloader), but for some reason the bootloader wasn't actually unlocked, and flashing a ROM caused the device to be bricked. This is probably what you would call a hard-brick.
In my case, replacement took a little more than a week. But this could differ from country to country.
Click to expand...
Click to collapse
But in time to take the assistance, you said what about it? The unit stopped working alone?

wmosquini said:
But in time to take the assistance, you said what about it? The unit stopped working alone?
Click to expand...
Click to collapse
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.

linasj said:
Exactly. Since the device cannot be turned on, I don't think they have any way of checking if it was rooted or tampered with in any way. So your best bet is to just play dumb and tell them your phone doesn't boot up. That helped me to get it fixed for free.
Click to expand...
Click to collapse
Legal, tomorrow I will even take the guarantee to solve as fast as possible. Really the device not the sign of life at all. I will inform you that the device was carrying at night and just when I catch him in the morning, he was like that.
Thank you for your help. : D

My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck

bacitoto said:
My first L90 didn't have a functional GPS, was brand new (1 week), problem was I rooted in the first day
Factory reset, hid superuser app, got a new l90
Gud luck
Click to expand...
Click to collapse
hard reset does not remove all traces of root. There is RCT checking. u can be sure that have no traces of root when RCT was reset. On kit kat we have chance to reset it without reflashing. But on 5.0 only reflash
---------- Post added at 11:17 ---------- Previous post was at 11:11 ----------
wmosquini said:
dear, sorry the English, but I need a help from you.
I made the installation of IMG extracted the KDZ and did flash the recovery, however, now my machine not the sign of life, the computer does not detect the device, the device does not turn on, not of any sign of life. already tried in various corners anything to help me have some solution. I did the procedure based on the stock rom flash D405 with img extracted files. After that the only active device the display if I put to load without the battery, which displays the battery with a question mark. The device does not enter download mode, does not go into recovery, does not display anything, as if completely dead. Does anyone have aware and know any solution to the problem? Note: I've tried the LG flahs tools, it does not detect the device.
Click to expand...
Click to collapse
Did u flash it from 5.0 or 4.4? This problem may have solve without service center. But if u have warranty, it must not worry u.

@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.

No, I don't think I ever got this message.
Sent from my LG-D405N using XDA Free mobile app.

pick.orion said:
@linasj
Hello, I just want to know that while booting, did your phone show the message "Secure booting error"?
I am getting this message at the LG logo and then device just shuts off.
Click to expand...
Click to collapse
In my case, the device did not care and neither carried, gave no sign of life. I sent him for assistance in less than one week they made the repair by warranty.