Hey friends.
I have some questions which i can't seem to find the answer to.
1. what's all that deal with SPL? what exactly is that and why do i need to flash it before flashing the radio version? what do i have to watch out from in order to not bricking my phone?
2. I wanted to flash a radio version from ERE36B that was posted on modaco site.
I downloaded the zip, copied to the sdcard, flashed it using the amonra 1.7 recovery. it said that it was successfully flashed but the radio version hadn't changed. what did i do wrong? I wanted to flash using fastboot but there were no .img files posted. only after extracting the zip files there is an img file inside along with some other files that may be important.
3. why are there different versions of superboot for each build? I mean, after I used superboot once and rooted my phone - I won't have to use it ever again.
no?
many thanks and sorry for the long post.
1. SPL stands for Second Program Loader. but you wont have to worry about it on the Nexus One. Its a different story for the G1.
2. If flashing the radio is successful then your baseband should be 4.04.00.03_2. And you might already had that radio if you just recently bought your phone.
3. Superboot version is not different. As long as you flash a rooted version of the rom then you will still retain root. But if you flash back to a stock rom, then you'll lose root. So always use nandroid to backup.
Thanks for the answer
So what exactly are the risks ?
is it possible to brick the nexus one or it's completely impossible?
10x!
Related
Sorry, I am new with Andorid phone. I rooted my phone and my phone is using stock rom FRF-91
I downloaded version B Battery-Black Numbers for stock FRF-91 non-themed from http://forum.xda-developers.com/showthread.php?t=754873.
After downloaded, I don't know what to do with the zip file. Someone told me that I can use A4D Utility to flash into the phone. I keep trying and no luck.
I want to have step-by-step guide to teach me how to flash a theme into a phone.
If I am using ROM Manager to flash CM6-RC3. Do I need to unlock bootloader? Do I need to have Superboot installed?
Also, how to tell if my phone is bootloader unlocked?
just use ROM Manager to flash the theme...just as you did with CM6.
Just make sure you backup the ROM when the Manager asks you. Just in case something goes wrong...you can restore back to your previous state.
ive been tryin to flash theses roms i can do the one click but i tried the other ones and im using rom manager and i install it and boot in recovery mode and it comes up with errors
What errors?
Flash this
http://forum.xda-developers.com/showthread.php?t=818439
Then flash this
http://www.ponack.net/designgears/Cognitionv2.2BETA9_ODIN.zip
You should be good.
well the cognition roms work but the other ones dont they dont have the one click
adamcoop22 said:
well the cognition roms work but the other ones dont they dont have the one click
Click to expand...
Click to collapse
What one click are you referring to? If you are talking about odin one click, the only thing you should be using that for is going back to stock before flashing a rom. If a rom is flashable through clockwork than you would just put it on your internal sd card and follow the instructions for flashing through Rom Manager. If it is a rom that is supposed to be flashed with odin you would have to open up the zip file you downloaded and enter the appropriate files into odin.
CLgcsi said:
What one click are you referring to? If you are talking about odin one click, the only thing you should be using that for is going back to stock before flashing a rom. If a rom is flashable through clockwork than you would just put it on your internal sd card and follow the instructions for flashing through Rom Manager. If it is a rom that is supposed to be flashed with odin you would have to open up the zip file you downloaded and enter the appropriate files into odin.
Click to expand...
Click to collapse
WELL **** I flashed a rom now im stuck on congnition rom and i cant flash another one can u help
You need to be more descriptive if you want people to figure out a solution to your specific problem. Your post amounts to "I flashed a rom, I'm having problems, vague reference to rom manager, help guys".
Here's what we need:
1. What version of Android are you trying to flash?
2. What version are you currently running?
3. What modifications have you done?
4. What is the specific error you are getting?
5. What is the EXACT process you are using to try to flash the new rom?
READ READ READ READ READ, THEN READ SOME MORE!
you obviously have not read enough. there are 2 versions of ODIN we use for our phones:
One click ODIN which is simply a prepackaged version of the regular ODIN configured with the appropriate files that ODIN needs to flash our phones with it....they are packaged up by a developer named DesignGears. not every rom is going to have a one click odin....
there is also regular ODIN which requires you to have the appropriate files associated with your rom (kernel, pit file, modem, csc file, and rom), sometimes devs will package as much of that as possible into one or 2 files to flash in ODIN
you need to spend some time learning how to use these or just use the one click and go back to stock, then leave your phone alone. seriously, freaking out on a forum is not the right way to go about getting help for your phone.
calm down and give up the info that modest_mandroid has requested. none of us magically know what the heck you are talking about when you spout out random things like help, i flashed something and now i cant do anything else
My stupid N1 updated to 2.3.4 via ota. and i lost root
If i follow the wiki, which says downgrade to 2.3.3 and then use super1 click for 2.3.3
Will i be ok?
Can some1 paste the link which has the 2.3.3 file that i can flash as passimg.zip?
I donot wanna flash something wrong and brick my phone (i live in Ind where htc service is minimal)
i have an htc slcd with 0c15 microp
how do i flash Amon_ra recovery? i have had success in flashing the clockworkmod frm Rom manager, Any merits in flashing amon_ra?
thanks guys
Ok well if you look in the wiki at the unroot/restore section then you'll find the passimg file for frg83 use that (there is none for 2.3.3) then just root with superoneclick rageagainstthecage method. The other option you have is to unlock the bootloader then fastboot flash a recovery. Now for flashing Amon RA you can do that from ROM manager as well just flash clockwork mod then reboot and you'll see that the flash alternate recovery is no longer grayed out it says Amon RA 2.2.1 just tap that and you've got Amon. Me personally I prefer Amon RA.
rooting 2.3.4
Hey bro, thanks for the advice
I actually found a GrI40 2.3.3 gingerbread stock on the xda forums, If i copy this 2 the SD card and apply as passimg.zip,will it work?
http://forum.xda-developers.com/showthread.php?t=968396,
the 1st build actually says its a stock rom which i am happy to use
Also, is there an app on the market before i apply root>?
i hve about 22 apps and would ideally wanna back them up, before downgrading and flashing
can u advise?
thanks again,,,,
Ok well for the file no you can't use that you need a shipment ROM which come from leaks, the file you found will only work if you flash it from recovery if your rooted or from fastboot if your bootloader is unlocked. As far as backups go the best option without root access is mybackup pro.
And "your stupid N1" did not update itself. The phone is not stupid...
must have happened by mistake
there is no frigging way i updated 2 gingrbrd when i was happily rooted
so itsw stupid
Yes YOU did.
If it makes you feel better to blame the phone for your stupidity then so be it.
Why can't you unlock the bootloader? Why are so, many people afraid to unlock the, damn bootloader? I don't get it.... Just unlock it, flash recovery, flash su, reboot... Profit???? Done. Simple.
bootloader unlock
Babydoll
thx 4 ur advice sir !
Thats one option i have thot off , 2 unlock loader n then flash recovery
But i live in ind ,where N1 cant be serviced and unlocking bootloader
also screws it warranty
Can i dwngrade to 2.3.3 using the GRI40 2.3.3 rom which is avail on on our forums. and then root with super1click?
Once again thx 4 ur advice
Albundy 2010 -if u think ur the only intelligent guy and feel ur superior, i have not seen that kinda stupidity ,thx
I don't think that at all. Just letting you know that it's your fault the phone updated. Don't blame the "stupid" phone for your actions. Just another case of a smart phone - stupid user.
ok thanx 4 the feedback
now that u given ur stupid lecture about "stupidity", can u actually lemme no if its possible 2 downgrade with Stock GrI40 avail on our forums,
Few say its possible and few say it cant
I d like 2 dwngrade 2 use super1click on 2.3.3 which i believe is possible
Yes it is possible. You need to use the passing.zip method to go back to a froyo. You can than root/install a custom recovery from there and flash a rom.
You can also install the OTA's up until 2.3.3 Root that/install custom recovery. Then flash the update to 2.3.4 from custom recovery and without rebooting flash su to keep root.
albundy2010 said:
Yes it is possible. You need to use the passing.zip method to go back to a froyo. You can than root/install a custom recovery from there and flash a rom.
You can also install the OTA's up until 2.3.3 Root that/install custom recovery. Then flash the update to 2.3.4 from custom recovery and without rebooting flash su to keep root.
Click to expand...
Click to collapse
o super!!!!!, i alrdy have the FRG33 renamed as passimg.zip on sd
But is it possible 2 go directly to GRI40 2.3.3?????[/B], which is stock gingerbrd
thats 1 doubt i hve been Having 4 a long time!!!!
whch is nippier than Froyo
I just dont want to apply 2.3.3 and then brick my device without expert advice
thx again 4 the assist
Yes!
Root FRG33, then manually apply the updates from recovery and flash the su zip over them. Do not reboot the phone, or you will lose the recovery and will have to start again...
OMG, this thread is still going?
Do yourself a big favor:
Go read Wiki, rooting guide, unlock bootloader method.
Execute fastboot oem unlock.
Then flash whatever recovery you like.
Then flash whatever ROM you like. Stock, not stock, 2.3.4, 120312.12974.0935789, whatever.
And if you're not ready for it - then go use your phone as it is, and don't think about rooting until you are. The most important part being - ready to learn to RTFM (google that, if you don't know what it is).
It's the 4th thread you open for help within less than 4 days. That clearly says something.
+1 Jack
The ONLY way to brick a nexus one is when a radio flash goes bad in recovery. Which is why I will only flash radios via fastboot. NOTHING else will do it. Except for physical issues with the phone like water or bad sectors etc.
I'm not a noob to phone flashing as I had a G1 from day 1 and have had numerous other HTC android devices since etc, just very new to tablet and with what im reading here, it's more complicated to flash roms on a tablet (or any samsung device for that matter) then on a phone. With a phone you just root, flash s-off or a new recovery, slap a rom on the SD card and flash it from clockworkmod or amon ra and blam, you are done. (hate the whole rom manager thing). Basically what im asking is what are the steps to get the tab ready to flash a rom. is it similar to a phone Root, recovery, rom? or is it different for each rom.
So far I've rooted using the noob root guide. I'm still on the original T-mobile stock firmware. I'm looking to get clockworkmod recovery flashed so i can start playing with all the wonderful rom's here. From what I have gathered...
http://forum.xda-developers.com/showthread.php?t=925760
Is this the only way to accomplish this as of right now?
I've checked to make sure im unlocked. im on stock 2.2. If I flash this using the odin instructions will it achieve what i'm looking for?
The rom I want to flash is the new 2.3.4 rom and the upcoming honeycomb rom. I might even try out overcome as well.
Thanks for any help in clarifying the process!
I have not flashed a ROM yet, but when I do how would I go back to stock? I made a CWM backup of being stock rooted, but I want to know of another way to go back. When I had the AT&T Galaxy S2, all I had to do was flash the tar file in Odin. I searched the development section and only found modified KJ4(2.3.5) and KKA(2.3.6) ROMs. I have the Polish Note if that matters.
Edit: I think I may have found the right way to go back to stock KKA. Just by placing the stock zimage using Chanfires method ^_^
Edit2: Meh figured it out
Sent from my GT-N7000 using xda premium
Edit3: Need confirmation on correct way to return to stock, as others have the same question.
Get the stock rom and reflash it.
ericyang said:
Get the stock rom and reflash it.
Click to expand...
Click to collapse
Yeah I definitely know that part, I'm more concerned about the way of doing it.
I heard that flashing through Odin would cause the yellow triangle as it would set off the flash counter... Can please you link me to the stock ROM that is flashable through Odin if this isn't the case? OR an alternative method besides the one I posted above.
I do in fact have tha same questions. I even went off topic in a ROM release thread about it.
I'm a longtime HTC user and with long time i mean since like 2002ish. I have no fear to mess around with HTC stuff since I know my way around and know exactly how to brick it, if I really want to ;-)
Things look different with the Note thought. The recovery doesnt stick but is kernel dependant, Odin seems to be similar to HBOOT but shouldn't be used since it tells Sammy what one did to its device. Flashing can be done by this that or another way, it all looks so weird and chaotic to a HTC camper... lol.
Sent from my GT-N7000
schaggo said:
I do in fact have tha same questions. I even went off topic in a ROM release thread about it.
I'm a longtime HTC user and with long time i mean since like 2002ish. I have no fear to mess around with HTC stuff since I know my way around and know exactly how to brick it, if I really want to ;-)
Things look different with the Note thought. The recovery doesnt stick but is kernel dependant, Odin seems to be similar to HBOOT but shouldn't be used since it tells Sammy what one did to its device. Flashing can be done by this that or another way, it all looks so weird and chaotic to a HTC camper... lol.
Sent from my GT-N7000
Click to expand...
Click to collapse
Hopefully we can get some clarification on the right method.
Sent from my GT-N7000 using xda premium
Goodm7sn said:
Cheers guys for the great info .
ive been following this thread for a while now , and i would like to suggest to the experts , if possible , to make a full step by step guide for how to revert to stock (including the whole stock kernel re-flashing process for different note models) bcos to be honest , i think many of us have this same question and are hesitated as the whole process sounds confusing.
i could be one of them as this is my first samsung device , coming from HTC Desire HD ,where flashing and development for samsung devices (as far as i know) is quite different from that on HTC devices.
Thank you again for the efforts , would be highly appreciated to get that guide post up.
Click to expand...
Click to collapse
dr.ketan said:
will post it soon
Click to expand...
Click to collapse
i think this thing is being worked on , all above is from this thread http://forum.xda-developers.com/showthread.php?t=1329360
Goodm7sn said:
i think this thing is being worked on , all above is from this thread http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Yeah he did update it. That's where I got the idea about just using Chainfire's Initial Root Flasher and placing the zImage in that folder. On the bottom of the OP, he put
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
I you have Just rooted only but not added CWM - Just Download this Extract - Execute - Rum Me unroot.bat
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
HTC Chris said:
Yeah he did update it. That's where I got the idea about just using Chainfire's Initial Root Flasher and placing the zImage in that folder. On the bottom of the OP, he put
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
I you have Just rooted only but not added CWM - Just Download this Extract - Execute - Rum Me unroot.bat
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
i have afew questions about that ,
where and how can i find the specific zimage for my device ? i understood that its in a compressed file extracted with 7-zip , but how can i get that compressed file ?
also , what if i had another type of ROM installed (NON stock) , how can i flash the original stock rom back (since i will not be be rooted, wont be able to restore NAND backups)??!
in HTC devices (i had Desire HD) , reverting to stock rom is simplified by flashing the "RUU" files , which were found in a dedicated thread.
This whole samsung diferences is really confusing me
thanks alot for any help.
cheers.
Goodm7sn said:
i have afew questions about that ,
where and how can i find the specific zimage for my device ? i understood that its in a compressed file extracted with 7-zip , but how can i get that compressed file ?
also , what if i had another type of ROM installed (NON stock) , how can i flash the original stock rom back (since i will not be be rooted, wont be able to restore NAND backups)??!
in HTC devices (i had Desire HD) , reverting to stock rom is simplified by flashing the "RUU" files , which were found in a dedicated thread.
This whole samsung diferences is really confusing me
thanks alot for any help.
cheers.
Click to expand...
Click to collapse
This is my ass-umption as I am still waiting for other responses as well.
In order to revert to stock you have to download the Initial Flasher.zip from Chainfire.
Then download your Kernel from the first page. http://forum.xda-developers.com/showthread.php?t=1331784 The zImage is taken from extracting your Kernel, whether it be KK1, KJ4, KKA, etc...
You place that zImage in the files folder and click "already-rooted.bat" *if you are coming from another ROM.*
Once that is done, you run the unrooting tool from Doomlord.
This method may work if you are able to access your device. As in your Android OS is up and running. What about a bootloop on a ROM/Kernel without a custom recovery built in confused. How would you go on from here?
On a part-bricked or bootlooping or otherwise fukkered HTC I would fire up my (bien sure as first thing) flashed ENG HBOOT, put it in FASTBOOT mode and simply a) fastboot boot c:\path\to\file\recovery.img or b) fastboot flash recovery c:\path\to\file\recovery.img and done. No brick from here, bc I a) always can restore a nandroid from here or b) always have a ROM ready on the SD or I could put it there using the mount usb option in the recovery, or heck, even by ADB PUSH. But on a Samsung...