Hello ... This is my first post on this forum also welcome ...
My English may not be accurate and understandable because I'm Polish ....
My problem is that my htc charmer does not turn ... after a few bad situations, I was forced to rescue kit install ... (My PDA was charged to 100%), unfortunately, after installing 80% of the active sync your phone will automatically be turned off .... I thought that it was normal so nothing that I did not ... I left the phone for about an hour claiming that the system will install to the end ... Unfortunately I was wrong because the system is not installed ... enough of this now you can not turn the phone on, even in recovery mode / RUU (if writing is something wrong correct me because I am Intermediate in the field) back to the topic ... I do not even now how to check if I charged the battery: / My question was already on the Polish forum but did not give advice for me to answer ... I hope that YOU date advice ... Please provide a rapid and specific response ... I hurry ...
Also waiting to greet and hope for the recovery of my phone ...
P.S. I have access to Windows XP and Active Sync ... Please help!
Oh and one more thing ... I can not very well English because I did not use the option "search"
Bite41 said:
Hello ... This is my first post on this forum also welcome ...
My English may not be accurate and understandable because I'm Polish ....
My problem is that my htc charmer does not turn ... after a few bad situations, I was forced to rescue kit install ... (My PDA was charged to 100%), unfortunately, after installing 80% of the active sync your phone will automatically be turned off .... I thought that it was normal so nothing that I did not ... I left the phone for about an hour claiming that the system will install to the end ... Unfortunately I was wrong because the system is not installed ... enough of this now you can not turn the phone on, even in recovery mode / RUU (if writing is something wrong correct me because I am Intermediate in the field) back to the topic ... I do not even now how to check if I charged the battery: / My question was already on the Polish forum but did not give advice for me to answer ... I hope that YOU date advice ... Please provide a rapid and specific response ... I hurry ...
Also waiting to greet and hope for the recovery of my phone ...
P.S. I have access to Windows XP and Active Sync ... Please help!
Oh and one more thing ... I can not very well English because I did not use the option "search"
Click to expand...
Click to collapse
if you speeking russian, try this link http://pda2u.ru/topic1549.html it's my topic, and i have question for you: your phone enter tri color? aka bootloader, and what IPL/SPL have your phone?
Unfortunately, I do not speak Russian ... barely comprehend English ... I'll tell you it does not enter, even in the three color screen because my phone did not respond to anything ... Chargers wrap up the ... LED is not lit If you have any idea please let me know as soon as possible!
Related
Dear Friends
Good Day To You all …
I have just bought a new pda2k I=mate and I was trying to be a smart person and update its rom and I think I messed up and now I’m getting a blank screen with a word serial on it and USB when I connect the sync cable. And I didn’t make any backup can some one help out im so sad about this thing
Thank you for your help in advance
Regards
Ati
Dont Panic
The first thing is... dont get panic with this.
Just do a soft reset,
put the device in the cradle with active sync on (dont worry of any message that comes on the PC),
double click on the ROM update file
Do the process again.
It will work now!!!
PDA2K upgrade problem
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Re: PDA2K upgrade problem
ati said:
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Click to expand...
Click to collapse
I dunno why ppl are doing the FIRST day a rom upgrade, firstly u should go over the upgrade posts and get familiar with the updates and how to do them. Sorry to say that mate but u deserved ur punishment.
Well since you can't play with your device try reading wiki.
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Just up, I really need help, I'm completely desperate... :|
You can put your device in bootloader mode?
eagleamon said:
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Click to expand...
Click to collapse
What symptoms do you have exactly? No led, no backlight, no text on the screen, no charging? What happens if you try to enter the bootloader?
Thanks for your interest.
In fact, after the flashing process, the phone switch off, and now, I cannot switch it on, if I put the usb cable, the pc does not detect anything, but the led ...
I let the beginnning but finally it starts !!!!
Yesterday, I disconnected the battery so as the secure one discharge also, and a few minutes ago, I put it on the 220V without hope and the led lighted ! and no it starts, but in German .. (I do not really understand this..)
So do you think that I should retry the french wizard rom ? Or this try cannot work ?
If this is the case, does someone know where I could find the English Charmer Rom (I do not find the T-mobile download page anymore) or better a french one
Thanks a lot in all case !!!
You flashed a charmer with a wizard ROM and it's working???
Well, i think that for you it's better to flash your device with a charmer ROM. On the ftp there is only a english ROM, not french.
No in fact it works again, but it's still in german ...
Could you please give me the link of the french rom ? I cannot find it...
Just a few more info...
So the phone works, in german, but there's someting really strange.. if I try to put it in bootlaoder mode, it's impossible, it switch off but do not swith on after, and not at all in fact, I have to get off the battery or put it on the charger so that it starts again...
And with the charger, after the boot, I can restart in bootloader mode, but at the second I unplug the charger, the phone switch off and it's not possible to restart witout the charger.....
Do you have an idea of what's happening ?? And how I could flash with an english rom ?? (doesn't work with the cradle USB cable..)
Thanks a lot !!
I think that the best thing to do is to flash the ROM with the WWE or German, as you like, you will find the ROMs on the Charmer section of the FTP.
Put your device in bootloader mode with the usb connected, then upgrade the ROM.
Indeed that would be the best solution but with the usb cable, it doesn't stay in bootloader mode, it switch off immediately ...
Do you know a reason of this behaviour ?
No one's got an idea .. ?
I'm still worry, so I do up
Just a last try
Is it possible that the bootlader has been changed and now dosen't work anymore ?
Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az
try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az
Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way
uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....
gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]
is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !
I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it
No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.
Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!
Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!
No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??
erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!
erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
thank anyway,i will try it before tomorrow,cause i will send them my device for repair.
first thingh SORRY FOR MY TERRIBLE ENGLISH
hi
please help me my p3600 don't run i've tryed an hard reset but nothing to do i power on the phone and i see only crazy image grey ble ecc ..
now i' ve tried to format with mtty ok i can do every task but the last one task 8 is blocked the phone restart itself and nothing mtty don't give me any message every thingh is blocked wath can i do please help me
Refer to this forum. I think the method I mentioned may work for you.
http://forum.xda-developers.com/showthread.php?t=531035
Good Luck and hope you can revive your Trinity
i have a new hd7 phone but there is nothing in this phone ....so please help me to install a window in my phone.....
gauravjaipur said:
i have a new hd7 phone but there is nothing in this phone ....so please help me to install a window in my phone.....
Click to expand...
Click to collapse
use the goldcard method and you'll be fine
faustolg said:
use the goldcard method and you'll be fine
Click to expand...
Click to collapse
is it works...???? my phone doesn't response while put battery on it and press power key. it only vibrate 3 times....
guys it's not working.....my phone is completely dead......so please help me...
gauravjaipur said:
guys it's not working.....my phone is completely dead......so please help me...
Click to expand...
Click to collapse
That looks more like a hardware failure than a soft one. Take it to a repair shop and have it tested.
HTC HD7 need to be flashed
my HD7 is down, when I start it, it just succed to reach the green HTC logo it seem that all have been Erase, I took a look on internet and it seem that it is possible to flash it back to initial factory status. (need some RUU****** files) I am not a developper, just try to find the name and location of right files (to download) to "wake up" my smartphone.
thanks everybody for your help and support.
please do'nt pay attention to miss write i am french.
pcrombez said:
my HD7 is down, when I start it, it just succed to reach the green HTC logo it seem that all have been Erase, I took a look on internet and it seem that it is possible to flash it back to initial factory status. (need some RUU****** files) I am not a developper, just try to find the name and location of right files (to download) to "wake up" my smartphone.
thanks everybody for your help and support.
please do'nt pay attention to miss write i am french.
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showthread.php?t=1676794
The ROM's can be found here http://www.androidfiles.org/ruu/?developer=Schubert