Windows 7 drivers? - Tilt, TyTN II, MDA Vario III General

Hi all I'm new to this so if I am asking the obvious then forgive me.
I have been using a KJam for ages and have just bought a MDA Vario III and for the life of me I cannot find drivers for either of them to sync to my Windows 7 64bit laptop. I have tried the HTC site, O2, T-mobile and google searches to no avail.
Once I can find the drivers I can change the awfull O2 rom version that is installed on the MDA and get my contacts and other stuff off my Kjam
Thanks to anyone prepaired to help

Just install WMDC from the M$ site.

I have installed as suggested but windows only finds a generic serial device and a message that windows failed to find the device driver.
When Windows Mobile Device Center is run it just tries to connect but eventually gives an ERROR message
I am running Windows 7 64 bit on a Sony Laptop
any help would be very welcome
Cheers

mick the mend said:
I have installed as suggested but windows only finds a generic serial device and a message that windows failed to find the device driver.
When Windows Mobile Device Center is run it just tries to connect but eventually gives an ERROR message
I am running Windows 7 64 bit on a Sony Laptop
any help would be very welcome
Cheers
Click to expand...
Click to collapse
Maybe you can find an answer in this thread
http://forum.xda-developers.com/showthread.php?t=579612&highlight=64+bit

Related

Windows Mobile Device Center Final

The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en
Please reply if you have any success syncing the blue angel.
Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks
firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).
it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app
All the beta branding is gone from the application too - so I think its both driver and app.
Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64
I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?
Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus
RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.
SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.
brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.
It Works
When I plugged my device in today, the system was able to find drivers. All is good now.

Problem with Rom Upgrade with Windows Vista

Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete
http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...

Stuck with Vista

I cannot get any thing to work with Windows Vista. I never had problems with XP and my other Wizard. I had it replaced through the insurance. Please help me. I have been through the threads claiming to have some way of tricking Vista with old drivers. I have installed them and had no change. Read all the threads!!
So Dont do it!!!
Man some versions work some doesnt... TRY XP men if you dont have problems since your first Wizard and xp use.
Dont be in panic mode, is not prooved even if many thread said that.
I'm just pissed, i had a great ROM running on my old phone. now i am stuck with a computer running Vista Ultimate and Mobile 5 on he replacement phone. I was hoping somebody found a way to run these Roms through Vista successfully.
Vista support for Windows Mobile is really hit and miss, it works for some, and not at all for others....your best bet is finding a friend with XP and upgrading it there.
Not G4 specific, moved > Upgrading
i use vmware with an xp image to mod my phone, i run vista x64.
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
scousemartin said:
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
Click to expand...
Click to collapse
I cannot flash my Wizard now that I have Vista 64-bit. I have followed many different methods that I have found on XDA in the last few days. I've downloaded and ran many different RUU tools, nothing gets me past the RUU crashing.
The one problem that I get hung up on is while installing a new driver for the Pocket PC (wceusbshx64.inf) in device manager I get the error message that the driver is not signed, I click next anyways. I then get the following message "The driver may be corrupt or missing (Code 39)".
Any other ideas? I'm having flashing withdrawals.............
Thank you for your help
Anyone that knows away to get around the above problems? Luckily I still have my XP computer upstairs, so I can still flash new roms. But I would like to keep it all on one computer (Vista)
Thanks
Some day...
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
+ Que PPC said:
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
Click to expand...
Click to collapse
Thanks, I remember seeing that thread before. I'll have to find XP and give it a try. The XP disk I have is for another computer so I'm not sure it will work.
Thanks

Problems, bricked? No idea

Hey guys, in the past i have upgraded from the stock os to what ever the newest on here was at the time.
But some time after vista came out i downloaded a possible offical upgrader from o2s xda website, this heap of crap failed half way through upgrading with no error messages - i assume it was becuase i was running on vista at the time.
So after that, once we turn on the device we just see what i assume is the bootloader, When connected it says "USB v1.06" and if we disconnect it says "Serial" instead of usb.
Some research today provided there are vista drivers to be downloaded, so i installed those (On windows server 2008 x64 R2 beta! which is based on vista rtm) the driver seemed to install fine,
I downloaded "Syed Ather WM 6.1 Dark Edition" and ran HimaUpgradeUt_noID.exe but this errors out before even running with the following:
---------------------------
HimaUpgradeUt_noID.exe - Application Error
---------------------------
The application failed to initialize properly (0xc0000135). Click OK to terminate the application.
So any general direction here on how to get my little device back would be nice thanks guys
it requires .Net Framework 2.0
More Info here : http://support.realtyware.com/article.aspx?id=10015
Funny! Nice of it to give such a useful error message!
Thank you for your input, i will install now
The installer says i already have the framework, so this is strange.
oh, u running Windows Vista , get the latest version of WMDC - Windows Mobile Device Center and idk if the x64 version of the drivers ever worked..but you could alwas try.. i suggest u to to install the rom on a pc with XP
Thanks for the fast responces etc
I got this sorted last night
Welcome back to life little xda

[Q] driver problem

when switch the phone in tri color bootloader windows it doesn't recognise the device...please help me with some drivers.. sorry for bad english
klaus25 said:
when switch the phone in tri color bootloader windows it doesn't recognise the device...please help me with some drivers.. sorry for bad english
Click to expand...
Click to collapse
maybe installing mobile device center for win7 or activesync for XP
i have windows 7 64 bits and i have mobile device center 6.1 instaled and still the same, i can connect to the phone when is on in windows mobile, but when i switch to the tri color bootloader windows doesn't recognise him... it may work if i tray to force the driver from the windows (selecting manualy from windows drive center)?
p.s. i want to do a task29 but the program doesn't find my phone after it's boot in tri color bootloader
I have the same problem. You use NAND Android before WinMob? I think the problem in this!
no, i haven't use(it had the original rom), but i have manage to istal android on my x1 without task29 and it's run ok on it
the easiest solution is to use the windows 7 update driver search
plug your phone
go to boot menu (three colors menu)
the windows will try to recognize the driver but it will give u red x
just hit obtain driver from windows update center
the easiest solution is to use the windows 7 update driver search
plug your phone
go to boot menu (three colors menu)
the windows will try to recognize the driver but it will give u red x
just hit obtain driver from windows update center
Click to expand...
Click to collapse
Still the same, it says that "Windows has determined the driver software for your device is up to date"
klaus25 said:
Still the same, it says that "Windows has determined the driver software for your device is up to date"
Click to expand...
Click to collapse
try another pc or operating system and follow the same instructions
barakaz said:
try another pc or operating system and follow the same instructions
Click to expand...
Click to collapse
still the same on xp and windows 7 on x64
klaus25 said:
still the same on xp and windows 7 on x64
Click to expand...
Click to collapse
i had the same problem with 2 different computers but they all running win xp, it keep asking me for the driver, and the worst thing was i lost my cd:crying:, can any one share the driver please? i had search on the net but nothing find

Categories

Resources