Related
hi i was able to do the hero update once before, but now im back to jf1.51
now i want to go back to hero and everytime i try to update the spl i get stuck in fastboot mode and i have to start all over again starting with rc29
i've tried wiping first and i've tried not wipping, everybody says its suppose to get stuck on g1 screen and then do the hero update, but mine always gets stuck on fastboot...but remember i was succesful the very first time i did all this! I am very frustrated please help!!!
Read my man. Read.
Not trying to be a a$$ but you need to find the Hero build you're wanting to put on and read the very first page of the thread. It will tell you all you need to do to flash the ROM.
I will say that you will most likely need the lastest radio, SPL and it wouldn't hurt to get Cyanogen's 1.4 recovery image.
All of these are readily available probably in the first three pages in the dev section.
trust me i've done all of those things you said i got all the latest updates, like i said i did it before, but now its not letting me, i have read read read....believe me im not retarted, i had it working once before, now ill tell u again after updating the new radio it says to rebbot so i do...then it takes me back to the recovery screen and at the bottom it says "formatting cache..." so i reboot again as im told to do and then the only screen i can get up is the fastboot loader. but if i try to install the new rom before i reboot the second time it takes me to the htc logo but loops!?!
Are you flashing Drizzy's Hero? If so, did you do your wipes and reformat your ext3?
Ya first I put jac2.63 on it that's when it worked I also didn't have my sd partioned at the time. So then later I partioned it into the 3 ones required when I went to try to hero back on and I was trying to put drizzy 1.7 on it. I heard that the rom litterally goes on the sdcard is this true. What goes on the ext3 partion??? Should I redo the partioning part
hello please someone help i am scared to try flashing again cause i had to go back to rc29 about 6 times, please read everthing i posted earlier to better understand my problem
Ok after countless searches on Google, and on here, with no help at all...I am making a thread. I decided a few days ago that since my phone ran terrible no matter what rom i used, that maybe the person who rooted it screwed it up. I decided to go back to stock, then back to root, then back to the rom, well somewhere i messed everything up. I had everything going good, but then flashed a bad .nbh from what i understand, got that all good now that i have a sd card adapter, now i have rc29 installed and running. When i try to use adb since i have no 3g and need wifi, it keeps saying cant find device, even tho i have used adb in the past just fine, and <enter>reboot<enter> does restart my phone. So i thought maybe its a spl error, i dled danger spl (newest from what my search found) but every time i go to recovery and try to flash update.zip i get errors. So i tried flashing the orig. just to see if it was a bad dl. Same thing. Errors. Im getting really frustrated. If someone could please help me i would greatly appreciate it. my email is [email protected] or [email protected] send me a email if you need an invite to gwave, id rather talk on that. Thanks Guys.
You can't flash a new spl with a stock rom. Did you make sure you have the right drivers installed for RC29.
shorty52732 said:
Ok after countless searches on Google, and on here, with no help at all...I am making a thread. I decided a few days ago that since my phone ran terrible no matter what rom i used, that maybe the person who rooted it screwed it up. I decided to go back to stock, then back to root, then back to the rom, well somewhere i messed everything up. I had everything going good, but then flashed a bad .nbh from what i understand, got that all good now that i have a sd card adapter, now i have rc29 installed and running. When i try to use adb since i have no 3g and need wifi, it keeps saying cant find device, even tho i have used adb in the past just fine, and <enter>reboot<enter> does restart my phone. So i thought maybe its a spl error, i dled danger spl (newest from what my search found) but every time i go to recovery and try to flash update.zip i get errors. So i tried flashing the orig. just to see if it was a bad dl. Same thing. Errors. Im getting really frustrated. If someone could please help me i would greatly appreciate it. my email is [email protected] or [email protected] send me a email if you need an invite to gwave, id rather talk on that. Thanks Guys.
Click to expand...
Click to collapse
It sounds like you're back to a "stock" phone after using the RC29 downgrade, which is a pretty good thing for you at this point because the stock recovery image just saved you from bricking your phone, by not allowing you to use update.zip to flash the danger spl with the old radio that you have from installing RC29.
That being said, now that you're back on RC29 you're gonna want to follow the rooting procedure over again to install a custom recovery image and then you can go about flashing your new rom after that.
You can follow the guide in Cyanogen's Wiki, Skip the First section called Downgrading since you've already done that, and pick up on the next section called rooting
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
Thanks.. I did end up following that wiki, but the heart n sole of the problem this whole time was a bad usb cable, tried a diff. one and it worked..I feel like a jackass,,
Hi,
I have tried searching (maybe I was not good enough), but this is what has happened.
My friend has a T-Mobile G1. I was looking for guides on how to root it and put the latest cyanogen on there.
Followed the guide on Cyanogen's wiki, discovered I had a RC33, and needed to be on RC29.
So load up the bootloader, put the NBH on, starts updating..i get BOOTLOADER-OK, RECOVERY-Fail.
Now I'm stuck on the tricolour screen.
Pls help or point towards help!
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
crusader0071 said:
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?.
Click to expand...
Click to collapse
Just use the top three wipes available in Anon's recovery menu: Wipe System/Data (1st), Davilk Cache (2nd), Ext Partition (3rd). If you haven't partitioned your SD card into FAT32, Ext2, 3, or 4 and Linux-Swap, do so now with the Recovery menu. You must backup your fat32 first, because a total repartition will totally blank your data. Good luck!
crusader0071 said:
Hi all,
I’m in desperate need of some of your wealth of experience, i have managed to root and flash my g1 with - rc9 JFv1.51_CRB43-EU.zip (Jesus freke), and recovery-RA-dream-v1.6.2.img recovery image!. Now i want to update to a newer rom!
Now for the problem, the recovery program allows me to flash many of the rom's available but none of them work after the flash completes it just loads the g1 screen and stops there i have left it on that screen for about 10 min’s and nothing at all happens, but then it will allow me to flash back to rc9 JFv1.51_CRB43-EU.zip absolutely fine no issues every time?. Do i need to install anything else before updating to Open Eclare 2.1.1 or SuperD1103-blk.? I’m in the UK with a UK g1 mobile if that makes a difference?
Click to expand...
Click to collapse
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
thanks for trying to help but....
hi thanks for your help but ...
i have partitioned the card via anons recovery flasher, i have set my 8gb to 96mb swap , 1.5gb ext2 and the rest is used for fat32.
i have also gone throught the menu and deleted / erased the top 3 as requested but when i install a new rom it still freezes on the g1 welcome screen? please help!
G1ForFun said:
Make sure you partition your sd card and then try like the above said....or maybe try flashing death spl.
http://forum.xda-developers.com/showthread.php?t=625886&highlight=Death
Click to expand...
Click to collapse
hi i just noticed im using Hard Spl update at the moment ? how do i update to Haykuro?
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
crusader0071 said:
i think i have totaly broke my phone? - i downloaded haykuros spl and flashed it via the anons recovers flash image from sd card, and now i can no longer get in to the recover menu? and no fast boot please please help me !
Click to expand...
Click to collapse
This is YOUR FAULT for NOT READING!!!!
You installed an SPL meant for an HTC MAGIC onto your HTC DREAM. It *CAN* be made to work, HOWEVER, you failed to read and understand what is required to actually do it safely.
SPECIFICALLY, you are stuck in boot mode 3 -- boot to recovery, and because you changed the SPL, your recovery partition is UNABLE TO BOOT.
You are BRICKED, and the only way out is to use a hardware interface called "JTAG", which requires you to disassemble the phone.
SPECIFICALLY:
You missed the part of that thread that says "MOD EDIT PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION".
I have no sympathy for you. That instruction is in big purple letters.
hi thanks for your info, do you know anyone or anywhere i can get my phone jtagged?
How could you mess it up with step by step instructions....lol...I am being dead serious....it doesn't get more clear than this.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
crusader0071 said:
i cant get in to fast boot or recovery i just get the g1 screen, if i press camera and power or if i press home and power i just get the g1 nothing else
Click to expand...
Click to collapse
Did you follow those steps when flashing the SPL? Did you even flash the radio before flashing the SPL?
It sounds like you have no idea what you did to your phone which is never a good sign (and usually means you shouldn't even be flashing custom radios/spl's/roms)
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
heres what you do
ive did this too lmao jus go here www*androidhustler*blogspot*com ( THE * ARE REPLACEMENTS FOR . BECAUSE I CANT POST A OUTSIDE LINK SO U GET WUT IM SAYING SWITCH THE * WITH A . ) THEN SCROLL DWN TO A POST CALLED THE 2010 HOW TO GET CYANOGEN LATEST. DO ALL STEPS AND DONT RUSH. IF YOURE G1 DOESNT BOOT UP PROPERLY THEN I QUIT THIS SHYT BRO. LOL FOR REAL AND IF U HAVE ANY QUESTION EMAIL ME AT [email protected]*COM
crusader0071 said:
no i did not, i was asking for help for the last 2 or 3 days? i did what i thought was right but it was not. can i fix it or not?
Click to expand...
Click to collapse
Sigh....I would go buy another phone off Craigslist or something similar.
Next time...please read before flashing....Although I'm sure you will after the last mishap.
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
I know here in town...there are so many G1's up for sale around the $150 mark in really really nice condition.
That's where I'd be looking if I bricked my G1. Well...I'd be replacing it with a HD2 probably...lol
garok89 said:
the only way to fix your phone is to buy a doner phone with a broken screen or something cheap off of ebay
there is NO KNOWN WAY to fix it without a doner (the jtag method isnt do-able yet)
Click to expand...
Click to collapse
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
details
Sleeepy2 said:
What do you mean by jtag method isn't do-able?
ezterry did mine without an issue.
Click to expand...
Click to collapse
have you got contact details for ezterry? if so pm me please.
as far as i can see the jtag is still in testing?
This noob is in the UK anyways. Let him figure it out.
Wrong section, soft bricked his own phone and freaking out.
Please READ. You are from the UK so your English isn't bad. You have no excuse for not following instructions.
Ways to fix your phone:
1) motherboard replacement
2) JTAG (experts are not anywhere near you though)
3) buy a new phone
Mods please get this out of here
My htc which is still default from factory freezes on start up. i have been advised that it needs a firmware upgrade but as i am unable to boot the phone up i am unable to upgrade the firmware. i am lost here i have been searching for hours to find a solution and can;t seem to find one so i thought i would ask you guys. it freezes on the screen smart mobility and doesn;t move from there.
Have you tryed to hard-reset?
To flash the original stock ROM via bootloader? as doesn't need to fully load os to flash.
i have tried to hard reset it now and it wont turn on now.
i got it to boot again after the hard reset but it did the same thing just froze on the smart mobility screen again. i had sent it in to be fixed but they wanted to charge me quite a bit to update the software and since i have 4 months till my contract is up i don;t want to pay it is there anyway i can give it the update whilst it is freezing during boot up
Try flash stock ROM via bootloader.
Camera button hold in press in stylus, stock rom "from wiki" now flash via usb or sd.
would you be able to suggest the best rom for me to use i have wm 6.1 the info it givews me is kais130 spl-3.29.0000 cpld-8 i have never done this before i just want to be sure i get the right one
You will need your carrier ROM as when flash will vendor check since not hard-spl'd.
thankyou so much for the help i was able to locate the correct rom and now my phone is working again you have been a great help
Glad you sorted, happy to help