help to flash, - Touch Viva, MDA Basic General

i had a file SSPL_RUU and cooked rom file, did i miss something? when i try to update the my touch viva, reboot, then original rom still. please help!

and what if i update my rom, and i want to back as original? what instructions must i do?

Related

In need of help! Please.

Hello,
I downloaded on my AT&T Fuze with stock ROM this program Diamond TF3D Config Setup v0.6.7 (2) to tweak the Touch Flo 3D i installed it and then i restarted it.
On restart it says an error message that shell32.exehas a problem and it wont work at all! It freezes!
Please help me....!
Please I dont know what do know...
Please please help me...
I dont know what do...
Options:
1. Install hard-spl and flash custom rom via Bootloader mode
2. Flash stock att rom again via Bootloader mode
(Search bolded words)
did hard reset after panicking
thanks for ther apid response!
you wanna see a magic trick?

how to bring back stock rom?

hy gujs,
please help me, i need to bring back my stock rom, 6.1, but dont know how! my vibra is broken, i have guarantie, but they want to official 6.1 rom.. now i have 6.5 rom heeelpp
b.u.m.p.
.
Look in the ROM section and just flash the generic UK one... R3A.
Also don't forget to return to the stock spl found here: http://forum.xda-developers.com/showthread.php?t=431218
I had no problems with a warranty job after returning to stock rom and spl.
extra how to: how to restore Stock SPL for warranty reasons.
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.
5. go on with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour screen with 0.52.OliNex version), it goes to 100%, reboots, done.
+1. to verify, enter bootloader (see description above in this post), and check version number on tricolour screen. it should say 0.72.0000.
this is what i found, but how to return stock OS?! can i overwrite 6.5? all next step i understand!
have you tried following the steps provided?
there is nothing different to flashing a 6.1 and 6.5
Hey guys.
Just on this. I downloaded a generic image, but how do I load a *.IMAGE file? CustomRUU doesn't do anything, and SE updater won't recognise the phone.
Thanks in advance.
u must rename .image to kovsimg.nbh
So.. issue solved?
solved, have forgot to delete image of wm6.1 from my memori stick! now is solved and evverything is oke, x1 is now to authorized repair!
thx all, if someone have problem like i just ask here will help
cheers

Phone Stuck on RGB/Bootloader Display

Guys,
My HD has an issues, it appears to only go to the RGB screen/bootloader. The error says:
"Upgrade ROM code error
Please try again"
It appeared after trying to downgrade from HardSPL after my screen kept being miss aligned and I was onable to use the phone properly.
O and O said:
Guys,
My HD has an issues, it appears to only go to the RGB screen/bootloader. The error says:
"Upgrade ROM code error
Please try again"
It appeared after trying to downgrade from HardSPL after my screen kept being miss aligned and I was onable to use the phone properly.
Click to expand...
Click to collapse
hello,
you should provide more information of what you're doing, or what you've done.
For example, telling us which rom are you using now and what rom you want to flash to.
Also, 'trying to downgrade from HSPL' to what?
And maybe some other relevant infos so that we all can help you
O and O said:
Guys,
My HD has an issues, it appears to only go to the RGB screen/bootloader. The error says:
"Upgrade ROM code error
Please try again"
It appeared after trying to downgrade from HardSPL after my screen kept being miss aligned and I was onable to use the phone properly.
Click to expand...
Click to collapse
Does it still show hspl as being loaded? If so, just flash the rom again, as it says. That error usually happens when the rom update process is interrupted.
I presume you are trying to flash back to a stock rom to correct some issues you are having. If so, follow the steps at the end of this post.
It was from a stock ROM - I was on Miri's v35 before then. I wanted to change SPL to stock so I sued the stock 1.15 file and when through the process and for some reason it didn't complete and now I get the error.
Bump - I kinda want my phone BACK!
O and O said:
It was from a stock ROM - I was on Miri's v35 before then. I wanted to change SPL to stock so I sued the stock 1.15 file and when through the process and for some reason it didn't complete and now I get the error.
Click to expand...
Click to collapse
Okay, let us all make things clear again, shall we?
You were with Miri's v35, then you decide to go back to stock. So you flashed back a stock rom, and now you want the spl back to stock spl.
So did you restored your radio too?
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
Click to expand...
Click to collapse
Now the other question: Did you overwrite the .nbh file as mentioned?

Question! Need expert's help!

I have been using Manila Rom's for a while now and i never had any problem with updating weather etc. But then I flashed an X2 Rom, and then went back to a manila Rom and now weahter won't update anymore... Weather for other city's will update but "my location" won't. I cannot understand why because it worked perfectly before. I tried various Rom's but the problem remained and then I tired task29 to wipe my device but still no luck!
Now I can only get my weather to update using Settings->Miscelaneous settings->AutoData Config and then it works but the problem is that not all manila Rom's have this option, and none of the non-manila Rom's have it so the amount of Rom's I can use is limited.
Does anyone know a solution that will keep working eventhough I flash diffrent Rom's?? It would be greatly appreciated!!
Ok so now i want to try flashing the stock dutch Rom for Xperia to see if that will help. But the dutch Rom won't flash.. It is an .image file instead of a .nbh file. Any answers for this??
Awassenaar said:
Ok so now i want to try flashing the stock dutch Rom for Xperia to see if that will help. But the dutch Rom won't flash.. It is an .image file instead of a .nbh file. Any answers for this??
Click to expand...
Click to collapse
rename to *.nbh...
Lol, fail
Ok so I flashed a stock Rom, hoping that it would somehow revert whatever is causing 'my locations' not to update but it still doesn't work
I am going crazy over here and I have no ideas left
Please someone make a suggestion even if it doesn't make sense!!
Did you read this?
http://forum.xda-developers.com/showpost.php?p=6188556&postcount=82
You are great! I could kiss you! You have no idea how long this thing was bugging me... Thank you thank you
Oh and next time when i have a problem I will check htc threads aswell since I use a manila Rom (duh! )

Please help me

Hi i am trying to update my x1 firmware but i keep getting this error "The Phone contain manipulated software and is not supported by this application". Can someone please help me i beg u
Are you trying to update your phone with SEUS? And are you currently using a custom cooked ROM?
Try to flash a stock ROM first, after that put softSPL back and last update with SEUS.
hi thx u for the reply, i tried to update it from the sony site but got that error, yeah i think it is a custom rom, i bought it second hand and it turns out like this.
Im not too smart with technology, can you guide me what to do???
What OS are you on now? Wm6.1 or wm6.5? You can check in Start - Settings - System - About.
Well....do you want to go back to a stock ROM or do you want a custom ROM? In other words, do you want wm6.1 or wm6.5?
If you want to go back to a stock ROM:
1) look here for your stock ROM and download it
http://forum.xda-developers.com/showthread.php?t=475482
2) read first and flash your device with the stock ROM
http://forum.xda-developers.com/showthread.php?t=446070
http://forum.xda-developers.com/showthread.php?t=445662
3) read on how to restore softSPL and do it
http://forum.xda-developers.com/showthread.php?t=431218
4) now your able to update with SEUS
If you want a new custom ROM:
1) search which ROM you want to try first and download it
http://forum.xda-developers.com/forumdisplay.php?f=471
2) read first and flash your device with the custom ROM
http://forum.xda-developers.com/showthread.php?t=446070
http://forum.xda-developers.com/showthread.php?t=445662
Remember when you flash a new ROM (custom or cooked) your devices memory will get completely erased, so DO A BACK-UP FIRST!
I strongly advice to read as much as possible before flashing your device, primarely the stickies in the ROM thread (http://forum.xda-developers.com/forumdisplay.php?f=471).
hi thxs for all the info, i just want to restore it to its original way instead of the fancy stuff

Categories

Resources