Hi, I tried running the upgrade of ba_o2asia_14000_923_11200_ship ROM using the MaUpgradeUt_noID.exe.
It is able to bypass the Country ID which I originally had but now it keeps prompting the "Radio Bootloader Version Error" error msg when it try to upgrade the ROM.
Anyone has any solutiont to this problem???
Now my XDA has been temporarily defunc and I could do nothing to it... *sob* *sob*
Hi, just some more piece of information. I am actually trying to upgrade the Blue Angel ROM on my XDA II (not IIs). Will that be the cause of the problem?
The ROM that I am upgrading to is:
ROM: 1.40
Radio: 1.12
Thanks
im no upgrade bof and i was very very worried indeed when i upgraded to imate 1.40 yesterday, but i would defo say that its not working cos its not compatable............. can anyone else confirm that????? 8)
hi,
i looked around for instructions on how to upgrade the ROM but i couldn't find any.
i have a very old ROM and i want to upgrade it to the latest ROM that includes the A2DP, etc.
how do i go about installing it? is it like installing a regular application? i have a Qtek 9100.
thanks,
Re: Simple guide - Unlock Vario and update to other ROMs
For anyone else who has had the same problem as we did, follow these simple instructions:
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Sorry to you gurus for the lengthy explanation, but some of us are still relatively inexperienced to this and a thorough (if you can call it that) explanation of the processes will really be appreciated. I certainly have done when some of guys broke it down to me in the past.
I'm hoping this ROM will not dissapoint me as the others have done, as I've been getting quite frustrated and angry about the whole WM5 & HTC thing.
Good luck. :wink:
Last ROM:
Custom ROM: O2 ROM
Rom Version: 1.5.4.2 WWE
Rom Date: 11/8/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtRom: Removed by default (xtra 10 megs in extended ROM through total Commander)
Current ROM
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101[/quote]
Credit goes to machinagod, button and all you other guys who helped me. Cheers
thanks for finding the informaiton for me!
Thanks for the breakdown. I am new to all this, and not too au fait with all the developer terms, and it can be quite intimidating!
I have an O2 branded XDA Mini S and want to use it with Vodafone SIM card. The device is unlocked, so I can make and receive calls - good start!
However, I want to get rid of all the O2 branding and install the vodafone GPRS/SMS/MMS etc. settings. From what I've read on the forums, the O2 stuff slows the unit down, and it will all be irrelevant anyway. Does the extended ROM you refer to above then get the unit into an "unbranded" state?
Basically, I just want the unit without any trace of O2 (boot splach screen, O2 active etc.) and to be able to put the Vodafone settings in manually...
Thanks
Thanks mackaby007 - managed to update rom using your instructions, and got rid of O2 screen using aWizard!
Unlock to Lock
Hi,
Can anyone tell me how to lock the phone back so for example if I had to send it to T-Mobile.
Thanks
Msuk
Re: Simple guide - Unlock Vario and update to other ROMs
mackaby007 said:
For anyone else who has had the same problem as we did, follow these simple instructions:
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Sorry to you gurus for the lengthy explanation, but some of us are still relatively inexperienced to this and a thorough (if you can call it that) explanation of the processes will really be appreciated. I certainly have done when some of guys broke it down to me in the past.
I'm hoping this ROM will not dissapoint me as the others have done, as I've been getting quite frustrated and angry about the whole WM5 & HTC thing.
Good luck. :wink:
Last ROM:
Custom ROM: O2 ROM
Rom Version: 1.5.4.2 WWE
Rom Date: 11/8/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtRom: Removed by default (xtra 10 megs in extended ROM through total Commander)
Current ROM
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101
Click to expand...
Click to collapse
Credit goes to machinagod, button and all you other guys who helped me. Cheers[/quote]
Hi,
Where do I download this lokiwiz v2b from ?????
Question I have is ... if after CID unlocked, and upgraded with different brand (DOPOD) ROM, When I upgrade again and use say and O2 ROM, do I need to CID unlock again?
ikkoku said:
Question I have is ... if after CID unlocked, and upgraded with different brand (DOPOD) ROM, When I upgrade again and use say and O2 ROM, do I need to CID unlock again?
Click to expand...
Click to collapse
No, you need to do CID unlock only once.
Cheers
hrb
Thanks for the help!
Hi,
I am try to replace the T-mob ROM to QTEK ROM on a Wizard Phone.
I tryed by using aWizard and lokiviz but notin to do.
All action are been performed (unlock CID, enable rapi).
My device have the latest T-mob ROM
OS:2.21.2.6
GSM:02.19.11
SPL:2.21.1.0001
Have I do downgrade the SW?
BR
Alex
squarna said:
Hi,
I am try to replace the T-mob ROM to QTEK ROM on a Wizard Phone.
I tryed by using aWizard and lokiviz but notin to do.
All action are been performed (unlock CID, enable rapi).
My device have the latest T-mob ROM
OS:2.21.2.6
GSM:02.19.11
SPL:2.21.1.0001
Have I do downgrade the SW?
BR
Alex
Click to expand...
Click to collapse
I have the exact same problem. Both Loki and aWizard don't work.
Typically when you want to downgrade your phone to an earlier (or shipped version) you need to first downgrade it to Button's 1.05, then you can "upgrade" to back to the desired 1.x or 2.x ROM.
Is that what you're asking?
Steven
chow
how is possible to downgrade the wizard phone to 1.05?
I have a T-mob wizard phone with inside IPL 2.21.0001,GSM 2.19.11, OS 2.21.2.6.
Have I to follow the below step?
1)dovngrade to 1.05 . Is necessary only OS or boot loader and ratio too?
2)perform again the flashing procedure.
Regards
Alex
squarna said:
how is possible to downgrade the wizard phone to 1.05?
I have a T-mob wizard phone with inside IPL 2.21.0001,GSM 2.19.11, OS 2.21.2.6.
Have I to follow the below step?
1)dovngrade to 1.05 . Is necessary only OS or boot loader and ratio too?
2)perform again the flashing procedure.
Regards
Alex
Click to expand...
Click to collapse
looks to me that you have a "G4" chipset, I can tell because you are reporting the IPL 2.21.0001 and not just IPL 2.21 Maybe someone else can verify this???? If so please please DONT try to flash before you have researched "G4" chipset flashing first
Dear sir,
you true!!
I have just read a post were is explained that if you have G4 chip is not possible to downgrade or upgrade the ROM.
Bootloaders (IPL/SPL) with .0001 at the end of the version are G4 flash chips.
This info will be very halpefully for everybody need to perform any flashing action on wizard phone.
Do you confirm that is actually not possible to solve this issue?
Regards
Alex
Have a look here http://forum.xda-developers.com/viewtopic.php?t=55757
http://forum.xda-developers.com/viewtopic.php?t=54578
http://forum.xda-developers.com/viewtopic.php?t=55972
I am very confused...
OK.
My wizard have G4 chip inside.
I was been able to remove the SIM lock.
If I try to CID unlock the device I receive CID unlocked successfull but after a ROM update the device stuck at startup.
Now...if I pay on http://www.imei-check.co.uk/ 20£ will be possible to change the ROM?
JAFWM
Hi,
I discovered a SW named JAFWM that is able to flsh evry ROM.
Is this true?
@squarna - Sorry mate but TBH with myself not having a G4 chipset Ive not taken much notice of any post relating to them, if no one else jumps in soon try starting a new thread with the title like "G4 chipset What roms work?" or something and good luck!
friends, i have a T-mobile MDA. i want to upgrade it in wm 6.0. in order to upgrade it, i download hard spl and run it. my device spl address changed from 2.21.0001 to 2.21.olip. after this whole procedure my device restarted but nothing changed. i am still using wm 5.0. plz plz plz somebody tell me that after spl change, how can i upgrade my dervice to wm 6.0 i will be ever ever thankfull to all of you. plz plz help me.
go to disco, thow device away.
geez.
stop wasting our time, ffs.
sonua_4 said:
friends, i have a T-mobile MDA. i want to upgrade it in wm 6.0. in order to upgrade it, i download hard spl and run it. my device spl address changed from 2.21.0001 to 2.21.olip. after this whole procedure my device restarted but nothing changed. i am still using wm 5.0. plz plz plz somebody tell me that after spl change, how can i upgrade my dervice to wm 6.0 i will be ever ever thankfull to all of you. plz plz help me.
Click to expand...
Click to collapse
Well thats unlocked the device but now you need a ROM, have you found one you want? Also is your device G3 or G4?
g4
i have a G4 device. i am trying to upgrade my device with new rom but always error ocured. help me
sonua_4 said:
i have a G4 device. i am trying to upgrade my device with new rom but always error ocured. help me
Click to expand...
Click to collapse
What error it gives ? as its already HardSPL,just download any latest wm6 or 6.1 rom and flash it.
which rom i flash to t mobile mda
zabardast_1 said:
What error it gives ? as its already HardSPL,just download any latest wm6 or 6.1 rom and flash it.
Click to expand...
Click to collapse
give me a link for wm 6.1 professinal t-mobile mda link my device is G4. i have already done hard spl
IPL= 2.21.0001
SPL= 2.21.01ip
ROM VERSION= 2.21.2.6 WWE
RADIO VERSION= 02.19.11
PROTOCOL VER= 4.1.13.09
EXT ROM VER= 2.21.2.109
HELP ME PLEASE
start here
http://wiki.xda-developers.com/
first of all...calm down and STOP BEING SO DESPERATE
second...download any windiws mobile 6 rom...you can just search the forum with "windows mobile 6 wizard" and after downloading the rom you just connect your device to usb cable and flash the windows mobile 6 on it...(PS : nothin..i likee your style)
Hello All,
I am living in israel and I bought HTC Diamond unlocked from US about 2 weeks ago, when i enter phone S/N in order to download ROM upgrade I get a message: "Sorry, this software download is not suitable for your device. " so I try to enter different S/N and finaly succeed to download: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
I tried to upgrade but I get a message: "this upgrade utility cannot be used for your pda phone"
why? does anyone had such a problem?
thanks in advance.
hello dude,
You will need to flash HardSPL first, to flash the rom.
or get the CID unlocked.
Search this site it has all the answers you need.
if you can post the seril number you used to download the rom, here so we can use it to down load roms that would be great.
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
htako75 said:
hi to u 2 : )
can you explain about Hardspl?
serial I used: HT827GN20545
Click to expand...
Click to collapse
Everything you need to know about Hardspl can be found at the link below.
http://forum.xda-developers.com/showthread.php?t=416211
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
htako75 said:
How can I know which HardSPL is suitable for my Diamond?
You can see my Diamond ver at my signature, if it is necessary for determine the HardSPL I need.
Thanks.
Click to expand...
Click to collapse
follow the link: http://forum.xda-developers.com/showthread.php?t=415955
download tool for hardSPL
your HTC diamond will be unlocked and you can flash any ROM
With regards to attempting an upgrade using the recently released "official ROM" from the HTC website, am I correct in thinking the following:
* With a HTC Touch Diamond on Orange UK, I only need to use the SIGNED HardSPL because the phone is locked but the ROM offered on the HTC website is from HTC itself and therefore signed??
* With just this offical ROM, does the "Radio" also needed to be updated separately somehow? Or if I don't want/need to change the radio on my Diamond, then I just install the ROM update only?
Thanks in advance..
I download: Hard-SPL-Diamond-OliNex.zip
when I tried to install HardSPL it was written: 1.30 OliNex.
should it supposed to be 1.40 OliNex?
please advice.
Thanks.
In addition, I finaly take a risk and upgraded that HardSPL - it is 1.30 Olinex instead of 1.40. (I still don't understand why?)
The problem is that I tried to upgrade 3 different 1.93 ROM but every one of them don't really working it's stuck on 0% and after ~5 min I get Error 264.
Does anyone had such an Error?
please advice.
Thanks in advance.
try 1.40 oilnex
I used 1.93Olinex Unsigned for mine
Hi everyone,
Finally I succeeded to upgrade the ROM. (1.93.401.2 WWE)
The problem was that I tried to upgrade it with singed HardSPL (that is why it was 1.30 ver instead of 1.40).
Newbie life isn't so easy
Thanks to all of you.
:hi there i have a htc tytn11 and have 2.50.771.0 WWE
03/10/08
1.27.15.32
22.51.88.13H
i have tried a number of devices to get rid of the error on cid so i can but a rom on dated RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40. 02_1.65.17.56_Ship now i have read through stickies and tried to get bootloader version up but failed i want to put new rom on my device also i have bought the phone from three mobile and it belongs to me but i seen some where if bootloader is 1.09 there not much i can do please any help would be brilliant as there are issues still with my htc freezing and gps playing up any help would be ace i hoped the pda would have been more better and with the update rom may fix a few problems thank you all.