Database Develop

oh god i think i bricked my 8125

so i upgraded to t mobile 2.26 and it worked fine..then i tried to flash the underground wm6 and it stalled out at 96 percent and errored...now im stuck at the boot screen with IPL 2.25 and spl 2.25 ....when i try to run the RUU it give me error: 260 or 274 connection or update error...
i dont know what else to do...anybody have any suggestions? please help!

Please read through the Wiki before posting.
Direct link: http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard#upgradings
There are several suggestions there on reviving a possibly bricked phone.

i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(

stolli said:
i did try that already to no avail...currently i am trying to use the shelltool to flash it..it picks up this info: version 2.26.10.2 device wizard lang. WWE brand HTC ...CID n/a ROM...N/a...says this should take more then 15 min..ill update on the progress....i really hope this works:-(
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/showthread.php?t=298613
BTW:It really helps if you tell us what IPL, SPL, OS versions you are on (those numbers that show up when you reboot). Also what type of phone you have (G3 or G4).

im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1

stolli said:
im sorry...it says 2.25 for both...however on the shelltool it says 2.26 so i dont even know anymore..
i did follow that tut....the problem is..i cant seem to flash from the bootloader screen...the RUU wont flash to my phone..it gives me an error when its checking phone info...o and its a G3 phone..(to the best of my knowladge)..when i started my rom was 2.25.11.1
Click to expand...
Click to collapse
Why are you doing shell tool with a G3 (I've seen where some G3's have been bricked with shell tool is used on them)? Did you try to flash the Wizard Love ROM? That seems to help in a lot of situations.
So again, more info helps. What is the exact error you are getting. And what rom are you trying to install? Is your phone CID Unlocked? May be worth trying to go back down to the Button Rom and doing the CID Unlock again.

PROBLEM SOLVED!
i dont know what was wrong..really..i just restarted my comp...and downgraded to a stock rom..and it worked fine!
man you have no idea how much i was freakin out..
thanks for all your help! i really appriate it!
time to try again

help on flash to crossbow

i have mda vario whit spacification
ipl/spl 2.26
os 2.26
gsm 2.25
when i flash to crossbow every fine up to 99% but after get error 302 some communication problem so i cant flash to crossbow then i flash to t-mobile rom and after that try again but same error after 99% plz help me how to solve this problem

ripalbaria said:
i have mda vario whit spacification
ipl/spl 2.26
os 2.26
gsm 2.25
when i flash to crossbow every fine up to 99% but after get error 302 some communication problem so i cant flash to crossbow then i flash to t-mobile rom and after that try again but same error after 99% plz help me how to solve this problem
Click to expand...
Click to collapse
Did you CID unlock? If so how did you do it? Have you flashed any other custom Roms? Are you using XP, Vista or something else?
I bet you are not CID unlocked and that is the source of your issues.

then what to do to cid unloc i used lockiwiz and my mobile is g3 and i use windows xp sp1 plz now tell me plz thanks in advance

plz help me on flashing

ripalbaria said:
plz help me on flashing
Click to expand...
Click to collapse
The best way to help yourself is to avoid this 'crying for help' posts and read old posts where billions of users had problems too.
Anyway, (to avoid being acused of flaming newbies), you must first check if your phone is CID unlocked for which you can use this tool (http://forum.xda-developers.com/showthread.php?t=295038) and in case it isn't you must dowgrade it to a 1.x SPL (don't ask me where to get them as there are a lot of external links in Google), CID unlock it and then move on to the higher (customized) ROMs
cheers
(check my signature )

ripalbaria said:
then what to do to cid unloc i used lockiwiz and my mobile is g3 and i use windows xp sp1 plz now tell me plz thanks in advance
Click to expand...
Click to collapse
Did you downgrade to button rom fist? If not... you're still CID-locked even if lockiwiz tells you it was succesfully. Follow this STICKY:
http://forum.xda-developers.com/showthread.php?t=298613
Getting sick of typing the same answer over and over again. Even if you did downgrade, you didn't tell us!

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy

you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used

AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?

but he says than he flashed with the oficcial rom there is no oficcial are agree

Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??

flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl

ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it

Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy

jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )

AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.

hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.

AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

help!!! need english leanguage for my imate k-jam

sorry if i ask vry stupid question because I'm new and can someone help me
i need a new soft or ROM vich can make my device ENGLISH and not rusian.
only what i need is to change a lenguage. i need ENGLISH language
plz plz plz heeelp!!!!

Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.

starkwong said:
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
Click to expand...
Click to collapse
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???

You DID NOT CID unlock your device.

siemensfun1 said:
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
Click to expand...
Click to collapse
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers

zabardast_1 said:
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
Click to expand...
Click to collapse
ok thanks!!! i'll try to upgrade my device tonight.
thanks all who try to help me.
sorry about my English.

i,ll try to update but language is still russian an ROM is still same.
I download thes file: RUU_NoID.exe, then i download an oficial ROM, then i replace the original ROM's RUU with RUU_NoID. operation begin, but after and of this nothing change.
ha can i change language for English? can anyone help me an give me a links of this files vich i can use???
my IPL/SPL is 2.16 and i think it is G3???
plz today i must do this i need help!!!
XDA-developers plz help me!!!

Well,I'll suggest you go for the second option,unlock your phone and upgrade to any latest wm6 custom build Roms.Once you get your phone unlocked,it stays unlocked and gives you the opportunity to keep on upgrading to the latest Roms and features.Read the stickies on unlocking and upgrading and do it correctly,I'm sure you'll have much more benefits and enjoyment.
Cheers !

zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends

siemensfun1 said:
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
Click to expand...
Click to collapse
ok,grrrrrr8,if you have managed to downgrade to ipl/spl 1.xx,its time to SIM/CID unlock the phone,read the 'definitive guide for unlocking by Dr.Puttingham and download the lokiwiz-2b tool and do the method exactly as stated in the guide to Sim/CID unlock your phone,after successful unlock upgrade to ipl/spl 2.xx by downloading and flashing T-mobile 2.26 to the phone,only then you can upgrade to any latest wm6 rom,as its required to have CID unlocked phone and ipl/spl 2.xx for upgrade to wm6.
Good luck

& 1 question again.
if i uogarde my device with T-mobile ROM 2.26 and want to upgrade again to WM6 i must unlock CID again??? or i can upgrade ROM without it???

wizard stuck on bootloader

hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...

Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.

HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please

jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744

zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.

Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all

jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck