Where i can find pppd-ril.options, i need write my login and password for my operator, i find /etc/ppp/chap-secrets and /etc/ppp/pap-secrets. My operator doesn't work with CHAP, only PAP. I write my login and pass(PPP and HDR), but 1x internet is broken, i wonna activate EVDO)= where i must write my hdr and ppp settings?
P.S.
HDR AN AUTH User Id (LONG): [email protected]
HDR AN AUTH Password (LONG): ESN_of_my_telephone
PPP USER ID: IT
PPP PASSWORD: IT
People, please help me! )=
I am also interested by this question, help please
People who help's??)=
Related
Hi Guys..
I have a small request for someone! I am fed up with playing with the settings every damn time I have to install a new rom or test something! Any chance someone can make a cab file for me with the GPRS and MMS settings?
1.
Connection name: GO 3G
Select a mode: Cellular Line GPRS , 3G
Access point name : gosurfingun
Leave user name, password and domain blank
MMS over GPRS settings
Connection name: GO MMS
Select a mode: Cellular Line GPRS , 3G
Access point name : gosurfingun
User name: mmsuser
Password : mms
Leave domain blank
MMS Server:
Server Name : go mobile
Gateway : 010.020.020.129
Port number : 9201
Server address : http://mmsc
Sending size limitation : 1200K
wap v2
Any help much appreciated!
Well I've been trying to set up the VPN from my uni for a while, but I've never had any luck, so here I am. The uni gives settings to put in the iPhone:
Add VPN Configuration, IPSEC mode.
Server: “vpn.usyd.edu.au”, Account: Unikey login name, Group Name: “wireless”, Secret: “jacaranda”
Now when I try to add IPSec on my G1, it asks either for a pre-shared key or certificate, neither of which I have. And none of the IPSec options on my G1 allow me to put in an account or group name... Any ideas?
Any help appreciated!
Hi there,
Hope someone can help here, please bear with me as i am new to Android and i am a bit of a technophobe
The issue i am having is i just bought a nexus one and cannot connect it to the internet. I have tried to manipulate the APN settings but still do not have any joy.
My mobile network provider is Ben.nl i have got the following setting off there site to connect to the internet however i think i may be missing something
Internet Settings
Profile name: Ben web
Homepage (URL, home):
Access point name: internet.be
Network type: IPv4
Proxy server address: None
Device IP address: Automatic
Name servers: Automatic
Security (security option): Non-secure
Device IP address: Automatic
Authentication: Normal
Username: none (ie blank)
Require password: no
Password: blank (enter nothing)
Wap settings
Profile name: Ben wap
Homepage (URL, home): wap.google.co
Access point name: wap.ben
Network type: IPv4
Proxy server address: 010,010,010,010
Device IP address: Automatic
Name servers: Automatic
Security (security option): Non-secure
Device IP address: Automatic
Authentication: Normal
Port: 8080
Username: none (ie blank)
Require password: no
Password: blank (enter nothing)
I have put the following info into my phone
APN Name Ben Web
APN Internet.be
Proxy not set
Port not set
Username not set
Password not set
Server not set
MMSC tmobilemms
MMS Proxy 010.010.010.011
MMS Port 8080
MCC 204
MNC 16
Auth Type not set
APN Type Default,Supl
Sorry for the long winded scroll hope someone can point me in the right direction as it is driving me mad not being able to do use it on the web.
Thanks in Advance
Stuart
Hi & welcome to XDA. Check over in the Nexus forum where someone with your carrier should be able to assist you.
http://forum.xda-developers.com/forumdisplay.php?f=556
Hello all,
I am new to android and ics, wanted to know if there is a way to configure Advanced features like username and password as our office WiFi has domain authentication with proxy configuration.
Appreciate any inputs.
Sent from my GT-N7000 using xda premium
I'm not sure about domain auth, however you can manually set the proxy / username / password / security type (WEP/WPA/WPA-PSK) per access point in ICS.
I don't think I was able to see any options to add user ID and password, it asks for the pass-phrase for the WEP, then it has advanced settings for proxy, but haven't seen an option to provide user ID and password.
I have a Nokia Lumia 1020 cell phone which uses Windows 8 and is running on Consumer Cellular.
I can access the internet via Wi-Fi but not otherwise.
See the attachment for the info that Consumer Cellular provides:
Here is the info that the 1020 needs:
mms apn
APN _________________________________
User name ____________________________
Password _____________________________
WAP gateway (URL) _____________________
WAP gateway port _______________________
MMSC (URL) ___________________________
MMSC port _____________________________
Maximum MMS size ______________________
mms apn
APN __________________________________
User name _____________________________
Password ______________________________
Proxy server (URL) _______________________
Proxy port ______________________________
What are my replies to the questions that the 1020 is asking?.
APN (Access Point Name) is att.mvno for both Internet and MMS.
There is no username or password required.
The MMS (but not the general Internet data) requires a proxy server: proxy.mvno.ccmobileweb.com, port 80.
You really should just use Nokia's network setup app if you can, though.
That worked!
GoodDayToDie said:
APN (Access Point Name) is att.mvno for both Internet and MMS.
There is no username or password required.
The MMS (but not the general Internet data) requires a proxy server: proxy.mvno.ccmobileweb.com, port 80.
You really should just use Nokia's network setup app if you can, though.
Click to expand...
Click to collapse
It is working now.
Thanks!!!