plz tell me what is method of hard reset of touch viva
Check it out here:
http://www.hardreset.eu/htc_touch_viva_opal_hard_reset_soft_reset_en.html
go to settings and click on "clear storage". If it is not present in your ROM, then press the green and red buttons together with pressing soft reset button. Remember to press all three at a time.
Related
Can anyone please guide me how to enter to bootloader mode? I want to upgrade my Radio. : :?
to get my XDA IIi into the bootloader, I keep trying the reccord button, power, and hard reset but it just does a hard reset and comes up with the O2 splash and then loads windows???
am I doing something wrong here?
Can anyone pls. advise me??
Priyal
To get to bootloader, you need to press and hold the power button, the action button (the d-pad) and the reset button for about 2 seconds until serial is displayed clearly on the screen.
where to find the reset button
i have krome navigator f1
i am holding dpad + power button but not able to find the reset button..please help me how to find it
hardreset.eu/images/o2_xda_2i_hard_reset_soft_reset.jpg
Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::
dont the manual spc how a hardreset is performed ?
Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.
rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right
what combination did you do to get to bootloader? just so we all know
im glad to help
Rory
rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.
go to bootloader is:
hold down button and press (red) reset button
Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse
I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.
I tried to search so if this is a re post im forreal sorry.. but i dled a CDMA rom and started a bootload .. and now im locked out..
Grey screen .. no button response.. Someone re assure me im not dead in the water.. .
I appreciate it... "Read twice flash once" right.. hopefully my phone will survive the live and learn process with me.
try a hard reset
Hard Reset (This cannot be performed while the device is connected/charging)
With the device turned off, press and hold the TALK/SEND and END/HANG UP buttons, then the press and hold the POWER button until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel."
Release the TALK/SEND, END and POWER buttons.
Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
(procedure found in Wiki)
Tmo or ATT?
both have official roms out, or found in a thread, i would try the correct one for your phone...
best of luck to you... i hope everything turns out ok
Official AT&T HTC Tilt2 Rom
http://forum.xda-developers.com/showthread.php?t=629059
Official T-Mobile TouchPro2
http://forum.xda-developers.com/showthread.php?t=620550
IMEI can also be found behind the battery
Are you able to enter bootloader mode (restart the device when holding down the VOL down button)?
If so - load a GSM ROM to the root of your SD card. and name it RHODIMG.nbh instead of ruu_signed.nbh. Then enter bootloadermode. You will have to press the powerbutton to flash the "update", and then soft reset with your stylus after update (or take out your battery).
Hope it sorts out
Hard reset isn't going to do anything if you've put a GSM ROM on your CDMA phone. You should be able to get into the bootloader though, as Novek has said (try pressing "reset" with the Volume Down button held down), then you can re-flash a CDMA ROM.
Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?
cell surgeon said:
Just before few minutes i have successfully upgraded my BS. I choose HSPL now my BL is 1.56 Olinex then flashed an blackSTONEhenge™ (WM6.5.3.28238/Manila 2.1) v6.0 rom all the process finished like a charm, now i can't able to Hard reset(Format)
I tried many times by pressing vol up + vol down then then power button at the same time but i cant see any prompt to format, it directly boots up into the os and i checked my volume keys also inside the os both works perfect.
As i used blackSTONEhenge™ there is also no clear storage option under START-SETTINGS-SYSTEM what do i do now?
Click to expand...
Click to collapse
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device
Hold Vol Up + Down and press the power button once (do not continue holding the power button). Continue holding vol up + down and it should get u where u want to go. Worked for me.
Fallen Spartan said:
Curious....why do you want to hard reset?
If you press vol up & vol down and continue to hold these and press power on button once you should be presented with a white screen and blue text. Press vol up again to restore manufacturer default, i.e. hard reset
Alternatively try asking within rom thread for where "clear storage" is located. I personally haven't used this rom so cannot comment, but it should be located somewhere on device
Click to expand...
Click to collapse
It was mentioned to format once or twice in the rom thread,
Thanks for your idea it solved my problem i can able to format now, i was such a noob trying holding even the power button instead of pressing it (very shortly) Once, it was not mentioned in any of the thread i googled.
Yes i searched but no 'clear storage' option in this rom must be fixed in feature.
Glad you got this sorted.
MOD EDIT - Thread closed as solution found
Hi! Im trying to fix a LG Optimus 2x because it won't boot Im trying to reset the factory settings, but when I enter the Recovery Menu on the phone (it actually does this itself when I try to boot it up normally) the only thing I can do is move the "select thingy" up and down with the volume buttons, but I cant select anything there I tried the Power button, but nothing :O I have tried holding it in, but nothing happends. I have also tried all the other buttons, but the only one that does something is the Home Button ( Shows/Hides the menu).
Please help me
the power button should work fine as the select button, but did you try touching the menu?
some more recent recovery versions support using the touchscreen.
if that doesnt work id say just reinstall cwm with nvflash
Hi
We need to know the version you use of CMW to help you. if you have the 5 probably touch
Have you tried re-installing from ROM manager.
Press either home button or menu button repeatedly until the log says "Back menu button enabled"