Related
Hi all,
My Vario 3 was in my pocket and the keylock wasn't on so buttons where being pressed at random.
Looking at the screen there is now a permanent white column to the left. It doesn't matter what program I display, it's always there, I've rebooted the device and the thing won't go away. (see attached photo)
Any ideas what may be causing this?
Thanks in advance.
Robert
rob3213 said:
Hi all,
My Vario 3 was in my pocket and the keylock wasn't on so buttons where being pressed at random.
Looking at the screen there is now a permanent white column to the left. It doesn't matter what program I display, it's always there, I've rebooted the device and the thing won't go away. (see attached photo)
Any ideas what may be causing this?
Thanks in advance.
Robert
Click to expand...
Click to collapse
Have you tried hard reset?
same thing happened to my Hermes, went away after a hard reset.
Thanks for the replies,
By hard reset I'm guessing you mean to remove the battery, wait a while, then put battery back and boot up?
I did that a few times and it's still there...
Any other ideas?
PS. I've attached another image showing the white column against the WM6 bootsplash screen
rob3213 said:
Thanks for the replies,
By hard reset I'm guessing you mean to remove the battery, wait a while, then put battery back and boot up?
I did that a few times and it's still there...
Any other ideas?
PS. I've attached another image showing the white column against the WM6 bootsplash screen
Click to expand...
Click to collapse
No, hard reset is something different. Check my signature to see what a soft reset and hard reset are and how to perform them.
Just performed a hard reset and it's STILL there!
hard reset means that you will lose all your data...
are you sure you did that?
if you did that and the screen is still like that, then maybe your screen has become faulty, which means you will have to change to a new screen if that white bar really bothers you that much.
I think it costs around £70 to £80 for a new screen.
If you have insurance with your service provider they might just give you a new phone.
Yep, Hard Reset wiped all my data clean off.
Yikes, so it could be a column of dead pixels!
try going into bootloader mode. if it is still there, then maybe your screen is to blame.
What about trying to realign the screen?
@Elisha
Yep. Still there on bootloader screen
@Mikulec
How do you realign the screen?
if it is hardware related, you will need to get a new screen. you can get it here: http://cnn.cn/shop/tytn-iitilt-screen-p-2032.html
or from fleabay: http://cgi.ebay.ca/Full-Original-LC...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
rob3213 said:
@Elisha
Yep. Still there on bootloader screen
@Mikulec
How do you realign the screen?
Click to expand...
Click to collapse
settings/system/screen/align screen
@Elisha
Thanks for the links
@Mikulec
Thanks, I assumed you meant you could somehow move the screens x-axis, I've tried calibrating the stylus but to no avail
Looks like it is hardware related then.
you could try a new ROM but if bootloader screen looks like that too, i doubt the new rom will help any.
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
rob3213 said:
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
Click to expand...
Click to collapse
Thats a good question, some say yes and some say no, the Raphael has less hardware buttons and not ahve tilted screen. So make your decision.
Maybe u can wait a little, nvidias chips look awsome, look at nvidia tegra.
Mikulec,
Wow! That looks great! No tilt, but hey with those specs I could plug it into a hdmi monitor and forget about the tiny screen altogether! I'm sold!
Thanks to all that have helped diagnose the problem with my Kaiser!
Robert
rob3213 said:
Oh well, I'll make do for now and then maybe look into upgrading to a new handset in the not too distant future.
btw, What's the next in line to the Kaiser? Raphael?
Click to expand...
Click to collapse
or....... you could wait a month or two and get the new Sonyn Ericsson Xperia X1.
http://www.sonyericsson.com/cws/products/mobilephones/overview/x1?cc=za&lc=en
Very nice indeed!
Thanks MACkjam
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
eyetac said:
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
Click to expand...
Click to collapse
...sounds like a hardware issue!
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
eyetac said:
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
Click to expand...
Click to collapse
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
http://www.youtube.com/watch?v=5-IUzerAT0s
exactly what mine does
even right after a screen re-align
sigh
cyron_at said:
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
Click to expand...
Click to collapse
ok, thanks dude
will take it in and hopefully get a replacement
another example of what mine is doing pretty much to the T
http://www.youtube.com/watch?v=ZhQIyqnTkS4&feature=user
if anyone may have a solution.. please let me know asap.. as i will try taking it in on saturday
thanks guys
damn, mine does the same from time to time!
does anybody have a solution?
did a replacement fix the problem?
unfortunately i havnt had a chance to take it in yet, but i have logged the problem with my service provider..
the problem occurs alot more when i used panosha's rom/s
with the default (and now alphazero) the problem seems less frequent, but definitely still happens..
happened badly yesterday when i used gps to get my girlfriend to a casting, but switched on car A/C and after 5 minutes it was cool again *shrug*
its really annoying though
will let u know when i finally get to taking it in, unless u get there first
Hi there, I have the exactly problem what you had. Whenever the machine is hot, it becomes mad. Any solution could be reslove the problem?
It really sounds like a hardware issue... When you return the phone to the store please flash back to the original stock rom (for warranty purposes )
same problem
i am getting he same alignment problem.i do it many times a day but still tapping somewhere on screen taps the other way.very difficult to dial phone numbers
cyron_at said:
...sounds like a hardware issue!
Click to expand...
Click to collapse
i dont think its an hardware issue,as after i align it works fine for few hours and then i have to align again to make the taps work acurately.........i have heard there is a cab file for it.if any one can post it here.........................or make a cab file so that clicking it makes the alignment as it was default with the new phone
It is a hardware issue. the screen somehow (usually when carried in front pants pocket) will get pressed and SHIFTED. Then screen pushes against the side-cover and this fools the touch-sensitivity of the screen. Try yourself - try to shift screen to one or other side, and directly after it will be better. it's still a service matter though. Send it for repair.
This is a known issue. You need to exchange the unit for a new one.
hey guys...
so late last year i took the phone in and it spent 3 weeks at leaf (HTC distributer here is south africa)
i got the phone back, turned it on in the store.. and guess what... still screwed..
i threw my toys to say the least and got a brand new phone..
the new phone was 110% up until 2 weeks ago..
it started doing the same damn thing (to a lesser extent)
i have found that its a connection problem..
the touch pad is very all over the place if used normally (so basically its unusable)
but if i hold down the top left of the phone(pushing down just above the start menu) with my left hand and use my fingers on my right.. the phone works perfectly again..
does anyone know how to fix this?
its so frustrating, especially knowing im going to be without it for 3 weeks or more again
hmmm ...
i heard that the radio-part is for managing the curcuits.
try an other rom.
but i cant give garanty, i hard it only.
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Please help meee My phone now is more slow than normal :/
That happened to me a while back, I took it apart several times and checked connections etc. but that did not fix it. I ended up buying a new LCD off of ebay which fixed it perfectly. So, I would suggest doing that (I bought one for 15USD used).
But this to me seems to be a problem on the main board, because the phone sometimes gets really slows And sometimes that white problem appears and others not, like 90% when i need to use my phone
Flash Stock ROM?
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
i think RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship is an OEM rom isnt? :x
P4k1t0 said:
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Click to expand...
Click to collapse
did you ask in the proper thread before starting a new one?
msd24200 said:
did you ask in the proper thread before starting a new one?
Click to expand...
Click to collapse
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
P4k1t0 said:
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
Click to expand...
Click to collapse
noticed when searching all your post that you went straight to starting a new thread for this instead of asking in on of the flashing threads. http://forum.xda-developers.com/showthread.php?t=533976
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
P4k1t0 said:
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
Click to expand...
Click to collapse
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
msd24200 said:
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
Click to expand...
Click to collapse
Dude i can enter on bootloader yes, can i use my phone yes! but the problem is that sometimes (i mean, like all the time) the screen stay white when i turn it on, and the phone stays slow!!!!
jsgjm said:
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
Click to expand...
Click to collapse
i have tried that rom too, but nothing the problem is here
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
zelendel said:
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Well, if is about the screen, i can say im safe :x
But one thing on my mind, the white screen i could say to change the screen to one new, but the problem is the kaiser stay a bit slow, and sometimes it dont respond to what i want!
With that stay thinking that the problem is about the mainboard or something like that :s but i hope the problem is the screen, i will buy a new on ebay
The ribbon cable for the digitizer (touch screen) attaches to the LCD, and then both signals feed through the same cable into the D-pad board, so its possible that there is a bad connection somewhere in the LCD/Digitizer assembly that causes it to not sense your inputs, even when the LCD itself is working. Mine just failed completely to a white screen and did not come back. It could be something besides the LCD..try flashing a new HardSPL and/or a different ROM, but if I had to bet, I would bet on the LCD.
zelendel said:
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Thankyou made me chuckle
P4k1t0, I know you're frustrated that you phone doesnt work, but do not get uppity at the other forum posters. If you sound off against msd24200 and a mod sees it, its likely to lock your topic.
i had the same situation two weeks back after i flash with my own cooked rom.
what i did is flash the stock rom through SD/storage card and everything is fine.
you already try this method ? you can search on how to flash from SD/storage card
to flash by sd card? ok ok i will try it right now to see
So here is my story.. i have a perfectly working kaiser, and one with a broken lcd.. but both of them are in terrible cosmetic condition.. so i decide to order from ebay a full housing (with keyboard included) to make it look good and give it to my brother as a present..
I perfectly disassemble the device with the working screen and easily install it in the new housing.. but when i turn it on i realise that the only working hardware keyboard buttons were q e u o f h l and some arrows i think...
My first conclusion was that the keyboard included in the housing was not working correctly so i decide to use my old one. but to my surprise the old keyboard also has only the same working buttons!!!
after that i also tried the keyboard from my other kaiser ( with the broken screen) with the same results.
So up to this point, i guess it is safe to assume that the keyboards have no problem.. but then the mystery grows cause i exchanged every single piece of the phone with the broken kaiser's parts and the problem remains the same...
Any idea?? i am an engineer and problems like that that i cannot think of a reason that they are happening drive me nuts!!! please help me sleep at nights..
thanx in advance!
Hooray! Someone else who has the exact same problem as me! The phone I have had the LCD screen replaced and once it was reassembled, the keyboard is wacky. I tried reseating it and the same keys you mention are the only ones working: Q E U O F H L, CAP/Shift, Tab, Space, Enter and the 4 arrow keys. Nothing else works. I'd love to see if anyone has a solution to our problem. =)
Also, I'm not sure if it does it for you but the backlighting doesn't turn back on once it goes off - even when pressing the working keys. I found other posts on this forum with similar problems (with no replies) but their keyboards were not working at all. There has to be a simple solution that we're missing if it's this common.
Thats really weird that we have the same keys working... it really has to be something we are missing... but i have changed everything..
the only thing i didnt change is the lcd, so now that you are telling me that this happened only after you changed the lcd, it got me thinking that maybe the lcd is not as inocent as it may seem... cause,ok, my first thought was like wtf the lcd couldnt mess up with the keyboard.. but now that i think about it it is the only thing i havent tried to replace.. i have a broken one but still quite operative, so i will try with this one and get back at you.. if in the meanwhile anyone else knows something or has an idea, please help a little bit!
Like you, I cannot find any reason between the keyboard and the screen that would cause this. They're not connected in any way or share any cables. They connect to different parts of the main board... there's no logic that I can find.
I got mine second-hand and the original owner said she had the LCD replaced because of a couple dead pixels. The keyboard was working fine before that. Let me know what you find out. I was planning on ordering a replacement keyboard assembly from eBay but since you've tried a couple, that saves me from wasting that money.
Unfortunatelly the extra LCD i had was not operating at all, so the test i wanted to do failed, and i still dont know whats causing the problem... i am more or less convinced that i have to buy a new lcd but it is a bit of a risk to change the screen because some buttons on the keyboard dont work, dont you think?? anyway i am wondering y nobody else has nothing to say... this hasnt happened to anyone else??
ilias_alk said:
Unfortunatelly the extra LCD i had was not operating at all, so the test i wanted to do failed, and i still dont know whats causing the problem... i am more or less convinced that i have to buy a new lcd but it is a bit of a risk to change the screen because some buttons on the keyboard dont work, dont you think?? anyway i am wondering y nobody else has nothing to say... this hasnt happened to anyone else??
Click to expand...
Click to collapse
Hey, why do not you try endkey replacement, you can read and download it at http://forum.xda-developers.com/showthread.php?t=704631
Hakim Rahman said:
Hey, why do not you try endkey replacement, you can read and download it at http://forum.xda-developers.com/showthread.php?t=704631
Click to expand...
Click to collapse
thank you for your reply! but i don't understand how this would help for our problems..
i talked with htc yesterday and they told me it couldnt be the lcd, but during the lcd replacement probably the flexiboard was a little torned (needs a microscope to be verified..) i am giving it for a free test on monday so i guess i l have a more detailed answer soon!!
ilias_alk said:
thank you for your reply! but i don't understand how this would help for our problems..
i talked with htc yesterday and they told me it couldnt be the lcd, but during the lcd replacement probably the flexiboard was a little torned (needs a microscope to be verified..) i am giving it for a free test on monday so i guess i l have a more detailed answer soon!!
Click to expand...
Click to collapse
Hmm, that's an interesting find. It's odd that the same problem exists on different phones, unless it's a common section/piece of the board/assembly that gets damaged. Are you going to try and use the assembly from your other phone? Let me know what happens. I'd like to know what piece I need to buy to get mine working again. =)
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance