I have the ATT Tilt 2, I flashed my first rom and it is working fine, the only problem I have is the Qwerty keyboard has changed. It is now setup like the touch pro2. How can I get back my original att keyboard setup without changing my new rom?
If you use the search function on this forum, you will find cabs that will map the keyboard for you. Or there might be a way to do this built into your ROM (e.g. in EnergyROM there is a built-in fucntion for this).
Helpful
Thanks will try
Do the following
Start--Tools--Carrier Provisioning -- then pick whether you want "ATT (Main)" or "ATT (Proxy Disable)"
i think you would want the first one though. make sure its on, save the changes, and restart and you will be good to go
mpatter23 said:
I have the ATT Tilt 2, I flashed my first rom and it is working fine, the only problem I have is the Qwerty keyboard has changed. It is now setup like the touch pro2. How can I get back my original att keyboard setup without changing my new rom?
Click to expand...
Click to collapse
Install this and reset...
Related
Okay here is a HTC wm6 rom that works with the tmobile wing keyboard.
I no longer own a wing but I do remember it working very well with the keyboard wounderfull for day to day use.Not sure if it is 100% but it works a lot better than the other official roms. It is very fast and clean. Its night and day between the tmobile rom and this one. You would need to set up the data settings for tmobile, but everything else works great. The installer in this package is the Herald uspl installer which I found here http://forum.xda-developers.com/showthread.php?t=332998&highlight=HERALD+USPL so credit goes to POF for the installer. The rom in the package however is different. if you want to install it using some another method feel free to do so, the ruu is in the ruu folder, i just found this method the most reliable. Enough talk, here it is.
I take no credit for this or any responsibility for anything you do to your device. none the less I’m here to offer up my help. Enjoy
package is a rar file
http://www.megaupload.com/?d=KQ9AXEHA
Do you know who converted the NB into a WORKING NHB?
Has anyone tried this yet?
I only have my wing since saturday and i'm a little cautious about installing roms... for the moment
I tried it. It worked fine. I only tried it to see if I should switch my base clean ROM to this RUU but I'm sticking with the Tmobile one because it already is where I want it to be more or less anyways.
Thank you.. i think i'll give it a try.. before messing with cooked roms and such.
Byez
ivanmmj said:
Do you know who converted the NB into a WORKING NHB?
Click to expand...
Click to collapse
No idea on that one
This ROM works well on T-Mobile Wing, with a few minor problems
The ROM, as packaged, flashed easily onto my T-Mobile wing.
The "normal" keyboard mapping is correct, but when I used the keyboard for smartdialing, the Q, W, E, P, O, & L keys were mapping to the wrong letters. I changed a few registry keys under HKLM\Software\HTC\Smartdial and that was fixed. Also, Windows Media Player rotates the wrong way when I go to fullscreen, so I had to change the "landscape" key in HKLM\System\GDI\Rotation.
There's also the mapping of the Voice & Message button. The voice button is mapped as the comm manager button and the Message button is the Voice button. I went around this by just re-assigning the keys.
I overclocked to 260Mhz and this ROM is running great.
Bug on my virtual phone keyboard and compact qwerty keyboard : impossible to type letters. Only numbers are displayed. My full qwerty keyboard works.
I had install and uninstall many keyboard like PCM, touchpal etc.
Thanks a lot !
Fafou
My case is worst then yours . All three HTC keyboards are numerics only. But the regular WM SIPs works fine.
Anyone got an answer to that?
Have you tried a different rom? might help...
disable the " Turn on one touch" option and it works again.
Got the same bug, and the only fix is to disable this option.
But you can do a soft reset and enable this option again and it should work normal again.
Havent figued out the reason of this bug yet, but i think it has something to do with editing the contacts.
btw, which hardspl version do you use?
slicker said:
Have you tried a different rom? might help...
Click to expand...
Click to collapse
I think its a bug on the 1.93 wwe roms, got it on every wwe rom except swifts 5.0. But 5.6 got this bug too.
I get the same problem if i have PCM player keyboard installed.
uninstalled it and a reboot fixes it... but i love PCM keyboard.
I'm on 1.37 Nor btw.
I'm using stock 1.93 ROM. full QWERTY was working for 2 week... till 2 days ago. I have reverse all the tweaks I made for the pass few days and it didn't help.
I think I'll try install a PCM trial and see if that helps.
Keyboard now working is a big issue. I hope HTC will publish a hotfix soon.
Installed PCM... all the HTC SIP still not functioning. But the hell with them... I like PCM better now.
Hope some one finds a fix. I want both PCM keyboard and the orignal ones.
Lobo13 said:
I have found a solution. Change this in the registry:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
[/quote]
Works after a reboot on diamond :)
Click to expand...
Click to collapse
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Hi there,
I just picket up the code of butlef app made by siggie1970
Butler - Using capacitive area as stroke launcher and many more features
Original thread: http://forum.xda-developers.com/showthread.php?t=464611
I decide to put some new features like layout change on keyboard slide out. It is useful for stoping SIP poping out. You can point to nullkb or any other layout.
Setings available in registry by any registry editor or by AdvancedConfig (configuration file and only Butler section for config file below)
New features added:
1. Feature lets you to set keyboard layout on keyboard slide in/out.
defautl values for IN - Full Qwerty, for OUT - nullKB. Configurable via registry keys:
EnableSIPChangerKbd
KbdInSIP
KbdOutSIP
2. (Butler1.2) After slide in (in my Rom) some services or apps ?? sets back the Compact layout. So double check added to butler - if after slide in 2sec keyboard was changed to something else but not the KbdInSIP, butler sets it again, otherwise no action performed.
that's more like it! I'll check it out after my ROM release, I'm currently building it right now
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
le_cactus said:
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
Click to expand...
Click to collapse
Good idea about "HKCU\ControlPanel\Profiles" Next release...
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
lbhocky19 said:
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
Click to expand...
Click to collapse
Yes, it lets you to change both. Separate registry keys for configuration.
No setings - you can use AdvancedConfig or registry editor. I thing that setings
is not used often and application would be bigger and more complex. So no plans for setings.
After install it will overwrite registry setings. If you want to keep old ones - save.
i had added the settings into advanced config for the old version
are you able to see the new feature of keyboard out sip setting in there? i only see the old settings so far
(and what is the number letter code for nullkb? thanks) im an idiot i searched around the interweb finally got the code then went to edit the setting and realized it was arleady set to nullkb blah but great job with the update coudlnt be happier
I had tried to use Butler with NATF ver 4.1 and it frooze the phone at the reboot screen. I had to do a hard reset, do you know if this version has the same issue?
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
le_cactus said:
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
Click to expand...
Click to collapse
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
linuxis said:
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
Click to expand...
Click to collapse
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
pfcsabre said:
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
Click to expand...
Click to collapse
Good idea, thanks. I'll try that also
linuxis said:
Good idea, thanks. I'll try that also
Click to expand...
Click to collapse
Let me know if that works because I don't see the point of having the SIP initialized on startup in the code-- Butler will be detecting the change of stylus in/out (or in your case slide-in/slide-out) anyway when the main thread starts (correct me if I'm wrong about this )
Which ROMs work
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
PDAVIET V12 - Freezes on boot up with keyboard showing
PDAVIET V13 - Freezes on boot up with keyboard showing
DA_G Kitchen ROMS - Freezes on boot up with keyboard showing (at least the ones I cooked)
Off topic, with a combination of SlideActions & KforTouchPro (and butler for the null keyboard) I now have my SIP's and keyboard working like the should. XT9 when needed, and MS$ driver when the keyboard is slide out. So now I can actualy use the keyboard in iGO8 en Ctrix clients!
Thanks!
Cheers
Cacti
Confused Stu said:
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
Click to expand...
Click to collapse
RREv4 freezes as well
Alternativly, although not quite as developed as butler, TouchLockPro now allows for the launching of programs/command parameters for capacitive swipes and actually adds four more capacitive swipes than what butler does. Likewise it does NOT freeze upon start up for whatever reason on any rom I've tried.
proven works
[BUG] Problem with Manilla.
It has problem with manilla. After launching app its a must to change active tab if you want launch this or another app again.
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
whiteblazer01 said:
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
Click to expand...
Click to collapse
Yes, Butler doesn't impact on the touch sensitive circle area at all, it only notices and interprets light swipes over the call/home/back buttons.
I have an AT&T tilt that has been out of commission for some time, finally repaired the screen and put it back to work. I decided to try the HTC Western EzInput since it was the same as on the new Tilt II and Pure that I've been looking at.
I put it on and everything runs as documented, just some SIP change issues and everything else seems fine, except the hardware keyboard function layout is all wrong. I have searched forums and google and can't find a keyboard layout file that matches this keyboard. This is not an issue to be fixed with the tilt keyboard fix, its more than just a couple symbols off, I can't even type numbers at all with the hardware keyboard.
I know I need a 4 row, 29 key, keyboard layout file to make this work properly with the eT9 settings, but I just can't seem to find one. I also can't seem to find the information needed to modify one of the existing layout files to match.
Any help would be greatly appreciated. I am trying to adjust myself to using touch only, but their are situations where the hardware keyboard is just more useful.
Oh and btw, I am using shifu's WM6.5 WWE V4.2 rom and loving it, just want my hardware keyboard working properly
Double that for me as well. Every version of ezinput 2 i have found so far for qvga f*** up my keyboard layout. If there is a version that don't, I would love to see it.
What I would have to do was once I installed EZInput, I'd install the Tilt Keyboard fix (you can easily search the forum) then soft reset.
http://forum.xda-developers.com/showthread.php?t=334911