Hi,
I tried to update my xda iis ROM using an O2 update wizard but the update failed half way through and now my xda iis has no ROM flashed . also when i try to update it again the wizard says that the update is not for my device. what can i do .
thanks in advance.
ok, give a little more information please.
what rom were you trying to flash?
what is your pc's operating system?
did you put the device into bootloader mode before flashing?
did you remove both the sim and the sd card before flashing?
i was trying to flash the Xda_IIs_172187_Final ROM. i am running windows 7 with updated drivers. it was in bootloader mode before flashing and i did remove the sim and SD card before flashing.
ok, if you installed the patched drivers for your windows 7 edition, there should actually no problem when flashing. you could just try again, since you seem to know the procedure pretty well. but before trying, please post the RUU log file, which you will find in the root C:\
it could be named RUU.log or .txt or HTCRUU or something like that. it will contain an error message.
also, when attempting to upgrade, make sure, that your battery is fully charged, because the battery won't charge during the upgrade.
every time i retry the flash i get an error saying that the rom image is the wrong one for my device even though it is the correct one.
HTCRUU says:
15:22:48:666 [msg] : Config Info : [667685],[1],[0].
15:22:48:666 [msg] : RadioFile Not Exist !
15:22:48:666 [msg] : MSystemFile Not Exist !
15:22:51:896 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
15:22:56:067 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
15:22:58:251 [msg] : Device BL VER : [2.07 ] [].
15:22:58:251 [err] : Device CID Error.
15:22:58:252 [err] : Device ModelID Error.
15:22:58:252 [msg] : START UnInitialization !
15:22:58:254 [msg] : END UnInitialization !
15:22:58:266 [msg] : IsBL. BL : [1]
ok, i see the problem(s):
first of all, i hope you extracted your upgrading package, so you have BAupgradeut.exe and nk.nbf and so on.
it seems, there are 2 files missing, the ms_.nbf and the radio_.nbf, in case you want to flash the full shipped rom with radio and extrom. maybe you want to check out xplode.tk to download the full rom, if it is listed there.
this is no big deal though, you have a radio rom, and it seems to work and the extrom is only for carrier customizations that happen after hard resetting, like a dialer skin, wallpaper, internet settings... those aren't necessary, still might be nice to have.
also, your device is currently flashed with a non-official rom, so the device id changed, to fix that, download the Chef_Tony RUU from my signature, paste the rom file you have, nk.nbf, in there and flash it, as usual, full battery, bootloader mode, no cards inside.
this RUU bypasses the usual checks and errors, like device id, country id...
tjashworth said:
every time i retry the flash i get an error saying that the rom image is the wrong one for my device even though it is the correct one.
HTCRUU says:
15:22:48:666 [msg] : Config Info : [667685],[1],[0].
15:22:48:666 [msg] : RadioFile Not Exist !
15:22:48:666 [msg] : MSystemFile Not Exist !
15:22:51:896 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
15:22:56:067 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
15:22:58:251 [msg] : Device BL VER : [2.07 ] [].
15:22:58:251 [err] : Device CID Error.
15:22:58:252 [err] : Device ModelID Error.
15:22:58:252 [msg] : START UnInitialization !
15:22:58:254 [msg] : END UnInitialization !
15:22:58:266 [msg] : IsBL. BL : [1]
Click to expand...
Click to collapse
Open the "HTCRUU.conf" or "RUU.conf" with notepad and add "[CHECKCEID_TYPE]=1" or "[CHECKCEID_TYPE]=0" and test it
thanks Chef_Tony. you are a life saver, my PDA is back up and running
Related
Where I can find ROMUpdateUtility_NoVendorID for Trinity?
On my device not working standart ROMUpdateUtility - Vendor ID Error
Where is the CID located? In the ROM itself ??
Hi, I flashing my friends Mteor from ROM 5.2.19593 (Build 19593.1.1.7) 1.038 to 1.044 and flashing crashed. Now working only switch to boot loader. I checked flash more rom from SD card, but finished on NOT ALLOW. It's problem nocompatibile SPL.
Now is boot with version
BREE100 IPL-1.0
BREE100 SPL-1.10.0000
I have second Breeze with working ROM 5.2.19593 (Build 19593.1.1.7) 1.044
Can you help me:
I need find new ROM compatibilite with SSPL-1.10.0000
or some program or some way for switch to SSPL-7.77 from SD_card or PC
or some way from full backup form my Mteor anf restore to second Mteor.
Can i use program and adress from HTC Wing? I don't know prosses for restore it.
REM This creates a backup of your current SPL
mkdir 1
REM cecopy SurrealNetworksAppUnlock.cab dev:\
REM prun SurrealNetworksAppUnlock.cab
pmemdump -a 0x8C000000 0x40000 1\spl-backup.nb
echo "spl-backup.nb written to subdirectory 1"
pause "press return to exit"
REPAIRED
It's possiblle flashing SSPL 1.10.000 by Russia original flash QTEK_A07 from http://wiki.xda-developers.com/index.php?pagename=Breeze_Upgrades
next time i flashed hardSPL 7.77
next time i flashed new ROM from.
hello and sorry for my bad English because I'm French.
Excuse me if my application you bored but I would simply like to improve radio reception with Radio 1.10.25.18 that seems better than what you offer and where I work, I barely get the signal.
I bought it released all operators.
I realized that my seller had purchased from the operator SFR and he has certainly made available for all operators to sell because his bill comes from SFR.
I can not install the Radio 1.10.25.18 with X1_RUU_Radio_UpdateUtility.
my X1 is released to all operators.
I use it with the operator Orange.
when I started the flash to install the new radio after synchronization total NETFramework 3.5 installed,
I have the following information in the PC:
IMAGE VERSION: 1.02.933.3
UPDATE TO: 1.00.000.0
I click to start operation
on GSM, the screen goes black, and 3 colors with which all this appears:
KOVS110
KPL-0.72 Olinex
MicroP1-707
MicroP2-707
then the screen goes gray with these instructions:
loading ...
NO IMAGE FILE!
then again with 3 colors:
KOVS110
KPL-0.72 Olinex
MicroP1-707
MicroP2-707
and then the gray panel with the update that begins and always fails to 5% growth and re gsm starts as if nothing had been attempted.
on my PC, I have the following information:
ERROR 244: INVALID MODEL ID
This utility can not be used for you PDA Phone.
Please check you Update utility
N-KPXV5667-S-RBRK./01 *
I have operate hard spl utility before, 100% ok
can you confirm that my problem is that it is not supercid and if so, could you help me?
thank you in advance
1- Be sure your phone ir > 50% battery charge (100% recommended)
2- Remove the SD card from the phone
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
thank you gtrab, I try it !!
yes the "no image file" is because the x1 in bootloader (tricolour screen) is searching the SDcard for the KOVSimg.nbh file.
- Be sure your phone ir > 50% battery charge (100% recommended)
I have wait to get 80% into battery before trying
2- Remove the SD card from the phone
ok
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
I have rename : this radio name "DIAMING.nbh" in "KOVSimg.nbh"
I have use : Radio v1.10.25.18 (Xperia)(52.56.25.29H) (SU) (Quad Band)
ligne n°3 : http://forum.xda-developers.com/showthread.php?t=470306
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
only KOVSimg.nbh inside
I obtain only this result :
when I started the flash to install the new radio after synchronization total NETFramework 3.5 installed,
I have the following information in the PC:
IMAGE VERSION: 1.02.933.3
UPDATE TO: 1.00.000.0
I click to start operation
on GSM, the screen goes black, and 3 colors with which all this appears:
KOVS110
KPL-0.72 Olinex
MicroP1-787
MicroP2-707
finish to get this message :
loading ...
NO IMAGE FILE!
and then the gray panel with the update that begins and always fails to 4% growth and re gsm starts as if nothing had been attempted.
on my PC, I have the following information:
ERROR 244: INVALID MODEL ID
This utility can not be used for you PDA Phone.
Please check you Update utility
N-KPXV5667-S-RBRK./01 *
after :
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
I try it, the same result
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
can you inform me please better about this method ?
thank a lot !
__________________
Couguy said:
..."DIAMING.nbh" in "KOVSimg.nbh"
I have use : Radio v1.10.25.18 (Xperia)(52.56.25.29H) (SU) (Quad Band)
ligne n°3 : http://forum.xda-developers.com/showthread.php?t=470306
Click to expand...
Click to collapse
LOL
That's a DIAMOND RADIO !!
Not suitable for Xperia X1 !!
You need to hex-edit the radio to make it compatible with Xperia X1
You can download some radios already hex-edited for Xperia X1 FROM THIS THREAD or you can learn how to hex-edit any radio by yourself CHECKING THE RADIOS THREAD HERE
I wrote a mini-tutorial on how to hex-edit radios HERE, page 9, post 87 from the Radio's thread
ecrivez moi un message privé si vous avez besoin de plus aide
thanks, I send you a MP
I close this post and a big tanks to gtrab for the superb help !!!!
all is good now with this :
I downloaded the file ONLY into this post :
http://forum.xda-developers.com/showthread.php?t=466404
there are others post where there are possibility to download radio special Xpéria but at the end, there are not the same and my problem com from all these others links !
I renamed as indicated
I removed the memory card.
I launched the operation and OK.
if you get this like me at firt:
transfert 99% and error 262, wait 100% about battery and retry !
thank you
Removed the SD card and OK.
gtrab said:
1- Be sure your phone ir > 50% battery charge (100% recommended)
2- Remove the SD card from the phone
3- Rename the radio file to KOVSimg.nbh and be sure to copy the radio file into THE SAME FOLDER where the RUU radio update utility exe is located
4- Be sure you put ONLY ONE *.nbh file into the RUU folder
PLAN B: Temporarily set your Windows PC to ENGLISH in
-> "control panel" -> "Region and Language configuration"
PLAN C: Use the micro SD card flashing method instead of the "RUU from PC" method
Click to expand...
Click to collapse
Same problem. Removed the SD card and OK.
Thanks...
Howdy
i want to develop for the tatto:click ive developed for the g1 magic mt3g hero nexus in writing software which roots devices for you.
what i need off of you guys is simple, i just want your hboot info n kernel so i can get to work on a solution.
i will then post up my findings for you all to try
here ya go
this is the boot.img and hboot from the tattoo_rom_1.67.405.6 rom version
http://www.4shared.com/file/213088911/9358cbe3/tattoo.html
need to extract it from the tattoo? how?
ralle.gade said:
this is the boot.img and hboot from the tattoo_rom_1.67.405.6 rom version
http://www.4shared.com/file/213088911/9358cbe3/tattoo.html
Click to expand...
Click to collapse
cheers, let the rooting begin lol
Any progress on this scene? It's been a while and I'm curious to see if you got root yet.
nothing at the moment iv had major issues on my server so gotta get that up n runnin again before i can do research
Maybe this could be interesting?
(...)
Bootloader / Downloadmode Features :
- Load any file to mobile at any address and execute (bootloader f.e.)
- Read out complete NAND Memory using bootloader (range given) with included MSM6250/A bootloader or any given bootloader
Usage : Take out battery, put in battery, press ON # to enter emergency mode, Execute Loader
or (with SL91,SF71 f.e.) enable FTM mode, Execute Loader
- Use any Download Mode or Bootloader Command to experiment
- Read application memory of newer Diag Ver 6 in Download Mode
- Show complete infos about used NAND after loading of Bootloader
Flasher Features :
Flash any QC mobile (OBL Multiboot) with given bootloader
- Flash PBL (dangerous), QCSBL, QCSBL Header and Config Bits, Partition, OEMSBL, OEMSBL Header, AMSS, AMSS Header and EFS
(...)
Functions for HTC only :
1. Check validity of HTC firmware (signature check)
2. Cut out signatures from .nbh file
3. Split radio.nb into qualcomm files for analysis
4. Find HTC Public keys using Cryptosearch
5. Generate Security passwords (SPL + radio) for newer HTC
6. Generate NBH Files (you can add any device into devlist.xml)
7. Dump Files from NBH (you can add any type into nbhtype.xml)
8. Fix radio.nb checksum
9. Generic Bootloader / AT Command interface with logging functions
10. Decrypt simsecure folder (governmental users only)
(...)
I see this searching about htc bootloader in google. Perhaps could be interesting?
ac6729
So I was following the rooting procedure on the unlockr.
Got to:
IV. Install Superboot and Custom Recovery Image
1. Download Superboot2.zip
Superboot.zip (updated 6/23/10)
2. Unzip the superboot.zip file.
3. Double click on the reboot-bootloader-windows.bat file and wait for the phone to boot into bootloader mode.
4. Then double click the install-superboot-windows.bat file and wait for it to finish. The phone will reboot.
well the problem is the phone hasn't booted yet... it posts acer screen, an acer + android screen then nothing... just backlight.
Does your PC recognize your phone?
So after the phone booted into bootloader, you did the install-superboot-windows and your phone rebooted to a blank screen?
If your computer does not recognize the phone, try to reboot into recovery and see if it recognizes it there:
1) Remove your battery and put it back in (leave the back cover off to make things faster/easier. I believe USB should be unplugged, not 100% sure. I think it was last time I did it)
2) Hold down Volume Down+Camera+Power. Phone should vibrate 2-3 times
3) Press power as if you are turning on the phone
This should get you into recovery (which I am assuming is stock recovery. You should see a picture of a little Android and a Caution sign in the middle of the screen). Plug in your USB and see if the Acer Flashing Tool recognizes it from there, if it does, re-flash the bin and try the process over.
I rooted my phone by installing Liquid Community Rom and following these steps here- http://code.google.com/p/acer-liqui...cker/wiki/HowToRootAndFlashLiquidCommunityROM .
Honestly, it is much easier to go about that way. And LCR is really good (it incorporates features from standard Android UI as well as the UI from the upcoming Acer Stream. Completely configurable plus features like Dolby Mobile and native DiVix player). If you don't like it, after installing, your phone would already be rooted with the latest recovery image so you can easily flash a different rom.
Thank you very much for the reply I actually ended up figuring it out. I was able to boot in to recovery mode. And used the signed community Rom to load the OS
Why dont they uppdate the liquid rooting page on unlockr. You have to read all the comments to not make this mistake.
When I updated mine I just pushed malezRecovery onto the phone with the adb shell, is superboot different from malezrecovery
i did the same as 'unacceptable'.
tried what 'HustlinDaily' said.
comp not recognising phone.
if i press camera+<back with usb in, it makes a sound but doesn't detect devise.
do you know how to get it to recognise phone?
found that if you up date 2 files into superboot folder, the phone will work, although not sure if phone is rooted. keep reading comments in unlocker
'TheShak' figured it out. i did what he said and phone works now.
When I tried to upgrade from 2.1 to the leaked ROM 2.2, after the Acer download tool completed several steps, it hanged somewhere and said "not connected".
Now I am still able to boot in recovery mode as you mentioned (Android boy with caution), but I repeat the same flashing procedure for many times but it still stops after completing the AMSS and say my phone is not connected, no matter what version of Android I flash (1.6, 2.1 or 2.2)
Please help, my liquid now is bricked !!!
Acer download tool's log file is hereunder
Code:
//=======================================================//
//================== Debug Log Start!! ==================//
//=======================================================//
[Info] : Program version is : ACER Download Tool [Intra][Single] v3.100 (2009.10.27)
[Info] : Merged file is : D:\AcerLiquid\Donut\Acer_Liquid_2.000.16_EMEA_GEN1.bin
[Info] : Port for Backup is : COM8
-----------------------------------------------------------
---------------- [Info] : Backup Start !! -----------------
-----------------------------------------------------------
[Backup] : Pass IsPhoneConnected()
[Backup] : Pass UnLockSpc()
[Backup] : Pass EnterIntoOfflineDigital()
[Backup] : In BackupNvItemProcess()
[Backup] : .csv file in : D:\AcerLiquid\A1_DL_Tool_[Intra][Single]_v3.100_20091027\OursNvTable_ReadyToUse.csv
[Backup] : Backup ForLoop is finished!
[Backup] : IMEI Number is : 353509030606837
[Backup] : xml file was written!!, Filename is : 353509030606837_0.xml
[Backup] : xml file was copied into A1_QCN directory !!
[Backup] : Path and filename is : C:\A1_QCN\353509030606837_0_0908_2104_07.xml
[Backup] : xml file was also copied into : C:\Program Files\QCNFILES
[Backup] : Path and filename is : C:\Program Files\QCNFILES\353509030606837_2010_0908_2104_07.xml
[Backup] : Backup Success !!
-----------------------------------------------------------
--------------- [Info] : Backup Finished!! ----------------
-----------------------------------------------------------
[Info] : Change mode Start! (OS to AMSS Download mode)
[Info] : Port is Open
[Info] : Port is Disposed
[Info] : Get AMSS Download Port Start!
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM7
[Info] : Port for AMSS Download is : COM7
[Info] : Beginning to Open AMSS COM Port : UsbConnect()
-----------------------------------------------------------
--------------- [Info] : Hex file Start !! ----------------
-----------------------------------------------------------
[Hex] : Receiver thread is ready !
[Hex] : Transfer thread is ready !
[AMSS Port] : WaitTime is : 15
[AMSS Port] : Old vid and pid was NOT Found...
[AMSS Port] : acer vid and pid was Found
[AMSS Port] : AMSS Port is : COM7
-----------------------------------------------------------
------------- [Info] : Hex file Finished !! ---------------
-----------------------------------------------------------
-----------------------------------------------------------
---------------- [Info] : AMSS Start !! ------------------
-----------------------------------------------------------
[AMSS] : AMSS Receiver Ready !
[AMSS] : No matter the partition table is the same or diff, Restoration is always needed !
[AMSS] : AMSS Start !
-----------------------------------------------------------
--------------- [Info] : AMSS Finished !! -----------------
-----------------------------------------------------------
[Info] : Change mode Start! (AMSS Download to Fastboot mode)
[Info] : Command is ready. (AMSS Download to Fastboot mode)
[Info] : Close AMSS com port
thaikinh said:
When I tried to upgrade from 2.1 to the leaked ROM 2.2, after the Acer download tool completed several steps, it hanged somewhere and said "not connected".
Now I am still able to boot in recovery mode as you mentioned (Android boy with caution), but I repeat the same flashing procedure for many times but it still stops after completing the AMSS and say my phone is not connected, no matter what version of Android I flash (1.6, 2.1 or 2.2)
Please help, my liquid now is bricked !!!
Click to expand...
Click to collapse
I have the same problem but I can't even get into recovery.
so i tried the method that was on the unlockr.com without reading all the steps. I've since upddate the 2 missing files.
But, in the meantime, I have the black screen of death.
Can someone please walk me through what to do from here on in.
THANKS!!!
lith_eelaqa said:
so i tried the method that was on the unlockr.com without reading all the steps. I've since upddate the 2 missing files.
But, in the meantime, I have the black screen of death.
Can someone please walk me through what to do from here on in.
THANKS!!!
Click to expand...
Click to collapse
Same problem here.. I can't start the phone, nor boot it into the boot loader. It's stuck onthe black screen after the acer logo. Can anyone help?!?!
I've been able to get into recovery mode. no android guy with a caution sign tho.
anyways run factory reset many times, still not working...
I also have the same problem, the backlight screen, I have copied a rom.zip file to SD card and it started to update but after a while ıt stopped with the error "E:Error in /sdcard/update.zip (status 2) Installation failed.
What should i do ?