Hi, I have i9000 with unworking 3 keys combo, and i use the adb reboot download turn the phone into 'downlpoad mode', then use Odin3_v1.0.exe to flash new firmware. But it just stop at "DO NOT TURN OFF TARGET!!", and 30mins nothing happen, then i remove the phone. The phone get Bricks, cant turn on anymore. any one can help me? and can anyone upgrade the phone 3 keys combo disabled??
Offical service
adb reboot DOWNLOAD????
i think it could work.
I'm sorry if this sounds a bit hard, but: There is a million warnings on this forum about flashing if your download mode key combo doesn't work. If you get the phone>!>pc screen, your phone is bricked (because you cannot use the button combo) and your only chance will be to try to return it and hope that the retailer is nice enough to replace it.
Sent from my GT-I9000 using XDA App
Where's fun if can't flash it?
Try:
Boot it to download mode with ADB.
Once in download mode, plug out the phone and start Odin.
Once Odin has started, plug in the phone.
Otherwise Odin will hang.
Richthofen said:
Try:
Boot it to download mode with ADB.
Once in download mode, plug out the phone and start Odin.
Once Odin has started, plug in the phone.
Otherwise Odin will hang.
Click to expand...
Click to collapse
And if the flash fails for some reason and the phone reboots, you have a bunch of spare parts for the new SGS you buy...
that is how the OP got his phone bricked! did you not read the rest of what he said?
he already did it via this method
Richthofen said:
Try:
Boot it to download mode with ADB.
Once in download mode, plug out the phone and start Odin.
Once Odin has started, plug in the phone.
Otherwise Odin will hang.
Click to expand...
Click to collapse
sending the phone in to the store for service is the only way to "fix" it, as they will likely have to replace the phone for you, expect 4 weeks wait time
I have a friend with this prob too, I made a ROM backup of my phone and flashed his that way.
AllGamer said:
that is how the OP got his phone bricked! did you not read the rest of what he said?
he already did it via this method
sending the phone in to the store for service is the only way to "fix" it, as they will likely have to replace the phone for you, expect 4 weeks wait time
Click to expand...
Click to collapse
Point being that the phone must be plugged in after Odin has been started not before.
Even my phone hangs if it is plugged in before Odin is running.
Related
So, if I want to test if my phone has download mode, and let's say it's successful, what next? Do I need to flash a ROM? Or can I just reboot the phone?
I know this might be a stupid question, but I know that when you do enter download mode, the screen says "Don't turn off target" or something like that, and I'd like to test download w/o flashing anything.
your phone has a download mode. It's used to flash roms. I wouldn't mess with it unless you plan on flashing.
My two cents.
Nope - if your not doing anything reboot or pull the battery if needed.
The real trick is not only getting into Download mode - but if your Odin 1 Clicking to have your computer & Odin to recognize the phone.
If you pull up Odin and then put the phone into download mode and it recognizes your device your golden. Same thing applies.. just unplug and reboot as normal.
cappysw10 said:
your phone has a download mode. It's used to flash roms. I wouldn't mess with it unless you plan on flashing.
My two cents.
Click to expand...
Click to collapse
and +1 10 char
Like was said you could pull the battery our hold your power button for about ten second. I disagree about the other posters saying unless you are flashing with odin to not use it. It us a good idea to find it if your three button combo works. If it does that is good. If it doesn't work it would be smart to be really careful with odin and swopping stuff around.
Sent from my SAMSUNG-SGH-I897 using XDA App
cappysw10 said:
your phone has a download mode. It's used to flash roms. I wouldn't mess with it unless you plan on flashing.
My two cents.
Click to expand...
Click to collapse
Uhh...jesus, well the whole point is that I want to know if my phone is hardware locked or not so I can know if flashing will be safe(r) and not have to worry about a soft brick and not getting adb to recognize the phone.
Don't worry I tested mine first. Just pull the sim, sd card and battery as instructed and then re-pull the battery again to reboot after you see if download mode is there. If you don't flash and don't have odin open at all, nothing changes on the internal rom.
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
alxpowa said:
Hi, I know the questions have been asked many times, but I did not see any good answers.
I have an I9000M an d I tried upgrading to froyo 2.2. I first tried with Kies, but it wouldn't. It would see my phone, I could add music, add/save contact, but when I upgraded it would just disconnect.
I turned to Odin's method. I had the seemingly frequent problem of it being stuck at "File Analysis" It had been there for an hour or so... So I got it was not working. I then had the bad idea of unplugging it, and now I'm stuck at the screen on boot with a [phone]---[exclamation mark]---[pc].
I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device (nor does Odin or Kies).
I tried removing the battery for about a minute and rebooting/replugging, etc. Nothing works.
What can I do more...?
Thanks
Click to expand...
Click to collapse
Without download mode (VOL Down, Home, Pwr) then your only options is to either send it in for repair or try to get download mode working with a homemade Jig.
More on that Here.
I heard story's of people of forcing it to go into download mode using heat as well from say a hair dryer. But I do not recommend that.
"I can't get into either recovery or download mode anymore (tried with 3 buttons, but wasnt able anyways before, and ADB don't see my device"
Click to expand...
Click to collapse
Also I'm just curious as how you used odin without even having download mode? I'm having my doubts that when you said I know this question has been asked many times but you have not found a good answer is true. Next time do a bit more reading before just flashing your device. If you have even 1 thing your not sure about when flashing your phone that's 1 to many.
Puzzled also .
First question has to be can you actually get the phone into download mode .
Thats the big yellow download sign .
That has to be your first step get download mode on your phone .
Odin does not work without download mode so if no download mode who knows what you where trying to achieve or did achieve .
jje
No, I could get it in download mode BEFORE attempting to flash. Then I started Odin.
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
alxpowa said:
Now, I'm stuck with the image on boot screen and I can't do a thing. Phone is not recognized anymore on my PC so ADB/KIES/Odin won't see it.
Click to expand...
Click to collapse
Remove Kies and reinstall that will make sure the drivers are OK .
Get into download mode if 3 buttons fail then you need the jig as posted.
Could try removing battery go to three button download mode and as you are holding down the buttons stick the battery back in to see if it enters download mode .
jje
Thanks guys for all the tips...! But nothing seems to work. It's just stuck at the connect error icon (?) and when I try to go in download mode either way, it just loops. (Icon appears and dissappears)
Two more questions:
1) If i have to get it repaired, do I contact Samsung or my provider ? (Bell in this case)
2) I'm at ease with electronics and stuff, so the jig should't be too hard to do for me, but is it guaranteed to work ? I mean, is it software-independant. Is there a problem that I can have that would prevent it to work ?
Thanks again!
Will work. Had the same issue as yours were I could not get into download mode and the phone would not boot either. The jig saved my phone. You can make your own or you can buy it on ebay. Good luck.
Good, should have all that at my job. Will try it.
Finally, it turns out that I called Bell and they told me that this was a common problem with these devices and they are sending me a new one!
Well.. whatever it was! haha
Thanks again for the help though!
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
pankajs37 said:
but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
yeah....using adb is the only possibility i would take into consideration too
xsenman said:
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
Click to expand...
Click to collapse
thanks
pankajs37 said:
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
I accidentally Flashed a vibrant rom on my i9000. When I finally did get it into download mode with the JIG, I flashed back to stock firmware with ODIN and It totally ruined my phone.... The screen went all crazy and it kept rebooting faster than odin could do anything to it.
Just be careful. Im really not sure what happened But its pooched now for sure. JTAG is my only option on that one
if u dont own JIG or u dont know how to use ADB . the other way is
remove battery from phone /sim card / sd card
take the USB connect with ur Laptop or PC ( dont use it with charger it will not work)
connect with ur phone , then u will see the black screen being lil bit lighter
pres the 3 combos button to enter download mode and then flash ur ROM
this always worked for me , i hard bricked 4 times already my phone :/
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Maxxd01 said:
First of all, I'm sorry if the answer is somewhere, I searched, but I "only" found many threads with suggestions for JIG use... The three stickies of Q&A also don't present related information I believe...
After some stuck situation in odin, I can't boot the phone. I get a yellow triangle, between a phone and a computer icons. Even if I try to charge the Phone, I get that static screen.
There's anything I can do without using JIG? I cannot enter download mode (at least with the traditional way), I always get that screen. As fair as I know, the phone is still 2.1 with official firmware (i was trying to apple the 2.3.6)
Click to expand...
Click to collapse
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
xsenman said:
you are still in download mode, without a proper ROM, so just connect with ODIN and it will function once USB cable is plugged in and flash the correct i9000 gingerbread ROM for your location
Click to expand...
Click to collapse
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Maxxd01 said:
The problem is, when entering ODIN, with the phone in this state, the phone is not detected at all by the computer, so ODIN fails to start...
Click to expand...
Click to collapse
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
xsenman said:
follow the procedure on My Android solutions, link below for connection problems, or else flash with a lap top or on a another PC. But First power down the phone, remove battery, remove EXT SD card and SIM Card and power up again using combo keys for download mode
Click to expand...
Click to collapse
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Maxxd01 said:
Yes, I tried the "first step solution" and all other ways you mention to enter download mode, but with no success
Click to expand...
Click to collapse
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Install drivers of your phone to your laptop or PC. If you have correct drivers it should pick your phone straight way.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Maxxd01 said:
I already have the drivers, they were installed back then when I tried to update the phone, so they are present now.
The problem is, I cant get out of the black screen of death.. in fact, I'm not sure if this model/version can enter download mode through combo keys, yesterday when the phone was borrowed to me, I tried and I couldn't, so I was using adb reboot download shell command - but anyway, the drivers are there.
Click to expand...
Click to collapse
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
rajamahbub said:
Then try on different PC. It might have corrupted. If you can see the triangle it means it is on download mode so it should connect to PC.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes. I'm wondering if my Google Nexus S drivers didn't not conflicted with the drivers I installed. I don't know.
Well, I'll try with another laptop, if that don't work, is it advisable to use a jig connector from a "trusted" seller? I'm asking because I already saw a comment or two along the about blewed (is this a word?) up phones.
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Latrop said:
Hey mate had the same issue your gonna have to get a jig as a lot of the i9000's came with corrupted boot loaders so you can't get into download without the jig and the screen your on isn't download mode I know which one your talking about with the phone the triangle and the computer
Sent via that ninja standing right behind you
Click to expand...
Click to collapse
Do I risk blowing up the phone using JIG?
No the jig basicly makes it so a certain voltage signal is sent to the CPU triggering download mode no risk at all
Sent via that ninja standing right behind you
I tried with another laptop with very well configured drivers, and didn't worked. Still didn't detected by odin. When I tried with another galaxy it works, after entering download mode...
I'm not admired, because before the brick, I was not able to enter the download mode with como keys, I shouldnt be surprised that does not happen now..
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
xmavrickx2005 said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1494493
1) Uninstall your drivers, and re-install the ones following the instructions and link above.
2) Pull your battery out for a few mins and then put it back in and go into download mode (power, volume down, home button).
3) Download stock + odin from the link above, and start odin, and connect phone to pc through usb.
Your phone should be detected -- this is where you got stuck right? I'll assume if its detected, the rest you can figure out (plus its in the link above)
Good luck bro!
Click to expand...
Click to collapse
That would be a good suggestion if could get into download mode Tried everything, including some other solutions that I found around the Web. Looks like the bootloader was corrupted since the beginning, and now that I need it more than ever (because the black screen of death phone-!-pc), I stucked until (hopefully) i get a JIG... Already bought one, have to wait a few days to receive it. Until then, I'm going to use a old nokia.
Jig is only option then install a stock gingerbread that will fix 3 button combos
Sent via that ninja standing right behind you
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Maxxd01 said:
Hello guys.
Finally solved the problem using JIG. Many thanks for all your help.
Click to expand...
Click to collapse
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
bakatenchu said:
Hello, i've got the same prob with you but my bought JIG couldn;t solve the prob.
May I know where did you buy the JIG?
Thanks a lot.
Click to expand...
Click to collapse
eBay.
Maxxd01 said:
eBay.
Click to expand...
Click to collapse
Thanks a lot. Managed to get one that revived my phone well.