hi
im trying to upgrade my Diamond2 from original ROM with 6.1 WM
to ROM With WM 6.5 which I got from HTC site
but through the operation I got the following message
"ERROR [294] : INVALID VENDER ID"
does anyone can help
[/SIZE]
Did you download the ROM for the correct region?
Otherwise you can just Hard SPL your device then extract the RUU_signed.nbh file from the update application with winrar then flash it from your storage card or use the custom RUU in this forum.
whats Hard SPL ???
and how i can do it
for a person who doesnt even know what is HSPL, i would suggest to start reading the stickies and searching before posting or doing anything with the device.
Related
Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.
Hi!
Got som issues!!
Updated my Qtek 9100 with IPL/SPL 3.08 - Worked fine!
Updated my OS with Core 2.0 - Seemed to work fine
As far as I know my device is CID-unlocked!
Restarted my phone!
Now my phone can't load the OS, was stucked in second splashscreen that shows the specs
IPL 3.08
SPL 3.08
GSM 02.69.11
OS 10.2.0.8
Entered the bootloader!
Disabled antivirus
Then Following steps has been taken:
Flash with the original rom "RUU Prodigy 21771 2177103 026111 QTEK SVE SVE Ship"-package (eg tool 2.5.2.0 Swe)
Result: "ERROR[296]: Upgrade Only
Flash the original ROM and with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the original ROM and with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[296]: Upgrade Only
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.5.2.0) Swedish
Result: ERROR[238]: Cannot read file
Flash the Core 2.0n ROM with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[238]: File Read
Flash the WM6 Busines Edition ROM with the ROMUpdateUtility (2.0.1.0) En
Result: Flashing 100% Success
Still hangs in second screen after boot!
Flash the original ROM with the ROMUpdateUtility packaged with the WM6BE (eg 2.0.1.0 en)
Result: Flashing 100% Success
Still hangs in second screen after boot!
Still with the same specs as described in the beginning!
The flashing went OK but nothing has changed, why????
Even tried a Hard Reset and reflashing again with the opriginal rom, no changes!
------------------------------------------------------------------------
Why? Dunno!
Can anyone give me a hint what to do??!!
Is there a IPL/SPL 2.xx to reflash my phone with?
Is this needed to be done before proceeding?
What else can I do, except get it to my dealer for repair?
/Mike
mostberg said:
As far as I know my device is CID-unlocked!
Click to expand...
Click to collapse
that doesn't sound like a very certain assertion?
-------------------------------------------------------------------------
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
-------------------------------------------------------------------------
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
-------------------------------------------------------------------------
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
all of which strongly imply that your are not cid unlocked
I downloaded the WM6 rom of HTC Herald from Thai website and tried to upgrade my Dopod C800's rom.But I faced a problem that "error invalid vender id".So I would like to know that how could I fix this problem,please.!!!
Thanks for your help.
Invalid vender ID
I got the same as yours. I'm THAI but working in CHINA so, I bought Dopod S1 (same model as Touch). THe OS is CHN so I also want to change the OS to ENG. After reading some advices in this web, I install the CID unlock and following with the RUU WWE (Dopod asia) and it turns out the "invalid vender ID".
Sill don't know how to do.
Hi
Quiet new to this, I have a HTC Touch Pro 2 and I downloaded "RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship" ROM update. (Win Mobile 6.5)
But when I run it I return with an error saying ERROR [294] : INVALID VENDER ID! Why might this be?
Originally this PDA was on vodafone UK which has been unlocked!
Apprreciate your help!
Thanks!
davin64 said:
Hi
Quiet new to this, I have a HTC Touch Pro 2 and I downloaded "RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship" ROM update. (Win Mobile 6.5)
But when I run it I return with an error saying ERROR [294] : INVALID VENDER ID! Why might this be?
Originally this PDA was on vodafone UK which has been unlocked!
Apprreciate your help!
Thanks!
Click to expand...
Click to collapse
Go through this thread and you will be fine
http://forum.xda-developers.com/showthread.php?t=550540
Cheers
Even though your phone has been unlocked, the installation routines will only let you install Vodafone-specific ROMs. If you HardSPL your phone (see the stickies) then you'll be able to flash whatever ROM you like, an official one or a "cooked" one from this forum.
I am about to flsh a rom to my g4 wizard 200 but the RUU keeps showing the error 300 anyone can help??
and another thing ...can anybody find me a frensh rom please i need it very much
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
Before you flash your rom, make sure you have the right rom or you will brick your wizard, also make sure you have CID unlocked device, read these posts before flashing (important)
http://forum.xda-developers.com/showthread.php?t=310831
http://forum.xda-developers.com/showthread.php?t=285435