Recently I installed the ROM Cognition, and want to theme this ROM.
As I understand, I download the theme, rename to 'update.zip', and install via recovery mode just like I did the ROM.
Here is where my question comes into play:
1. Some themes say they only are compatible with certain numbers/letters, such as: J16, JFW or things like this. How do I know if my phone will work with specific themes? I want to make sure that I do not brick my phone.
2. If I want to install a new ROM on my phone, should I flash with Odin back to Eclair 2.1, re-root, and install the new ROM? Or can I do this from ROM Manager with a backup of my Apps on Titanium Backup (and how do you export this to work on new ROMS)?
Thanks in advance
you should not be renaming ANYTHING to update.zip. you should be flashing roms and themes through clockwork mod recovery....
Yeah you're right. Can I go from one ROM to another without flashing back with Odin though?
In most cases you can flash one rom over another successfully.
1. Some themes say they only are compatible with certain numbers/letters, such as: J16, JFW or things like this. How do I know if my phone will work with specific themes? I want to make sure that I do not brick my phone.
Need to check what type of modem/kernel you have currently on your phone for compatibility. Go to Settings -> About Phone and look for the last three letters under Baseband Version - that will tell you if <x> Theme will work for your phone.
Also - it is highly suggested that you backup your framework-res.apk and twframework-res.apk before attempting to run the theme. This will prevent you from having to re-flash your entire phone. (Will need to use root explorer and be familiar with ADB commands to do this)
Make sure to follow the instructions on the person who created the theme. Most will tell you to use ROM Manager to install the theme.zip. Unless they specifically tell you to rename it to update.zip - don't.
2. If I want to install a new ROM on my phone, should I flash with Odin back to Eclair 2.1, re-root, and install the new ROM? Or can I do this from ROM Manager with a backup of my Apps on Titanium Backup (and how do you export this to work on new ROMS)?
It is highly suggested that you ODIN 1 Click back to stock before updating to a new ROM. If it is just an update then sure you would be able to install over the top of the existing ROM.
Although you "could" install a new ROM over the top of the "old" ROM - you could very likely have issues - starting fresh with going back to Stock prevents you from having any issues that might arise over flashing a new ROM.
Baseband of modem has nothing to do with compatibility of themes. You could be using a jpy or jk3 Rom framework base and be using the same jl3 or jk4 modem which is what is reflected in baseband version under about phone.
If Rom developer is nice they will reflect framework base in the build number, otherwise they usually say in the op for the Rom.
Sent from my ADR6300 using XDA App
Aha I stand corrected.
Although... before all the modem mix/matching started happening - it was a decent way to check what you were running.
Spose you would have to check the chef/dev before figuring it out like the dood above me said
As I'm reading about installing HC, Froyo or CM7 on eMMC, I'm curious about "saving" my current stock eclair rom in case I want to put it back...
If I make a CWM Recovery microSD, boot off that, do a backup... Can I just restore that if I want to get back to the way it is now? (assuming I just install something like Froyo to eMMC)
There are a few threads for stock recovery (check search). That will put it back like it was when you took it out if the box.
It's easier than trying to capture the partitions and data when someone else has already fine to all the trouble if doing it.
Sent from my KaosFroyo V39 Eris using XDA App
Thank you, I understand there are a few threads over in the developer section on how to get back to "out of the box" type stock, and I have read them and they all talk about using the done by someone else "images" or "roms."
They don't seem to apply as I've setup eclair pretty much the way I want to... so I am not looking for how to get back to "stock like out of the box"... but rather to the eclair as I have it setup now.
i.e. if I want to got back to eclair, I don't want to have to reconfigure everything all over again.
KidJoe,
Yes, you can do the backup like that, save it on your PC or something and restore later when you need it. I did that before.
Slu3
slu3 said:
KidJoe,
Yes, you can do the backup like that, save it on your PC or something and restore later when you need it. I did that before.
Slu3
Click to expand...
Click to collapse
Thank you for the confirmation.
Here are my doubts: Captivate on 2.2 no root
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
5)Do I need to go back to stock every time I want to flash a different rom?
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
jmtheiss said:
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Click to expand...
Click to collapse
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
DudeWatsThat said:
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
Click to expand...
Click to collapse
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
jmtheiss said:
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
Click to expand...
Click to collapse
Thanks again
I don't plan on flashing 2.3 roms until the official 2.3 release come out
Theres a Odin that flashes stock 2.2 instead of 2.1 can I use that one instead?
Theres a Odin that flashes stock 2.2 instead of 2.1
Click to expand...
Click to collapse
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
jmtheiss said:
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
Click to expand...
Click to collapse
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
DudeWatsThat said:
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
Click to expand...
Click to collapse
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
jmtheiss said:
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
Click to expand...
Click to collapse
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
DudeWatsThat said:
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
Click to expand...
Click to collapse
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
jmtheiss said:
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
Click to expand...
Click to collapse
Eh i got it into download mode and i pressed start on odin but i think its stuck did i have to root first and then use odin im kinda scared right now
Edit:its showing a phone a warning sign and a Pc like connect phone to pc
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)? It should look similar to the attached file.
jmtheiss said:
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)?
Click to expand...
Click to collapse
Eh yes its i managed to trouble shoot it and its reboting everything is ok and yes it did show a yellow text box as of right now i just need to pop in the sym and reboot i have succesfully flashed 2.1 i just need to root and get CWM thru Room manager correct me if im wrong.
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
jmtheiss said:
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
Click to expand...
Click to collapse
I just rooted now all I need is CWM and thank you for all your help!
Glad it worked out. Don't be afraid to ask more questions in the future, as a reply to a question you've asked could help someone else with the same question out.
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Miami_Son said:
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Click to expand...
Click to collapse
I did ALOT of searching before thinking of posting this,the reason I did it was because most of the post are from 2010 and I had doubts on if I should use those methods or if there where new ones.This is the Q&A sub-forum right?I did just that ask questions.
I made a backup of my stock ND3 Android 4.4.2 while helping someone restore their stock ROM. I know ND3 stock firmware isn't available yet (and perhaps never) but if you ever need to go back to stock and didn't make a backup, you can use this to get stock firmware back. You probably don't need this since you can use NCE ROM but just in case.
This does not include any bootloader/modem/etc, just system and data but should be enough to get you back on track.
http://stockroms.net/file/GalaxyS5/SM-G900A/SafeStrapBackup/4.4.2/KOT49H.G900AUCU2AND3.zip
Unzip and put under /TWRP/BACKUPS/blahblah directory.
If you don't have blahblah directory, just make backup of your current cache and will create one.
You can also follow this video if you just don't get it:
zedomax said:
I made a backup of my stock ND3 Android 4.4.2 while helping someone restore their stock ROM. I know ND3 stock firmware isn't available yet (and perhaps never) but if you ever need to go back to stock and didn't make a backup, you can use this to get stock firmware back. You probably don't need this since you can use NCE ROM but just in case.
This does not include any bootloader/modem/etc, just system and data but should be enough to get you back on track.
http://stockroms.net/file/GalaxyS5/SM-G900A/SafeStrapBackup/4.4.2/KOT49H.G900AUCU2AND3.zip
Unzip and put under /TWRP/BACKUPS/blahblah directory.
If you don't have blahblah directory, just make backup of your current cache and will create one.
You can also follow this video if you just don't get it:
Click to expand...
Click to collapse
Is it possible or can you do the same for ANG3? I fixed my phone using your backup three times. ?
nice, gonna debloat this and remove the carrier iq from it and some system stuff and use it. battery life sucks on all the roms for at&t right now. if i cant get more out of this stock rom im jumping back on my note 3.
This will still work being on NCE base correct?
I used this and it messed up the finger print scanner. Any ideas? It says to reboot to fix, but it doesn't fix it.
i have been looking for 2hrs...where can I download safestrap????? this is driving me crazy!
randybellis said:
i have been looking for 2hrs...where can I download safestrap????? this is driving me crazy!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=53659493