I use Captivate with JH7 + SRE 1.3 + lagfix and I can't call when it is 3g but not EDGE
Calls just drop
But income calls are fine
Maybe it's because this phone's 3g is 850/1900/2100 and in Russia it is just 1900/2100?
How to fix this?
JH7 has issues...and the lagfix can cause issues with JH7. The posts ive read in development do not seem to specify what issues JH7 has.
If everything was working on JF3/JH2/JH3 I would flash back and wait for the next stable release.
I just force 2g now, I am ok without 3g and battery consuming is less
waiting for froyo official release
Related
[Q] Lost GPS and 3G after restoring Samsung ROM
Guys,
I can't find an answer to this, even though I did search a lot...
I upgraded my phone from 2.1 to 2.2 a few weeks back, and it broke my GPS and 3g, no data connection over the phone network, only WIFI. I enabled the option and added to correct APN settings, but still the 3G (And the associated icon) never worked again.
Few weeks back I installed Darkyys rom and both came back properly, after a few updates with Darkyys roms (7.6/7.8/8.0) and a few disapointments later, I decided to switch to the latest Samsung ROM 2.2.1 JPX, I lost GPS and 3G again, so I tried JPY today, again still no luck.
Any help would be greatly appreciated
Thanking you in advance
Maybe got an other 3G Band in your area than the firmware? The JPX/Y firmwares got a GPS issues I think. GPS don't worked for me too. Tried to flash Darky's v8.1?
Sent from my GT-I9000 using XDA App
Yes I think you are right, I am probably missing the Vodafone Ireland settings for the 3G.
No idea how do I go adding them, anyone?
I have the AT&T Captivate and got it about a month ago. With stock rom I am never roaming at home and get 3-5 bars always while with different roms I've tried are Phoenix 4.1, Perception 10.2, Cognition 3.2 and Serendipity 4.3 and usually only get 1-2 bars max so phone always goes to roaming on T-Mobile which I can't do data then. I have tried going in and selecting to use AT&T network but once I leave the house I get same issue and then it locks out voice till I set it to another tower. Is there any recommended settings I should do?
I also did just replace the SIM card and that helped a couple other issues I had but still get same roaming issue with it. I have not tried flashing a new modem to any of the roms, since always seeing stuff of use JK3, JK4 etc.
With the old Tilt2 phone using Energy Rom software I never had reception issues using latest radio for that.
Try flashing the modem. The 2 i recomend are ugjl2 and nkp1. I have run into the same issues with various modems. If you can flash a rom, a modem will be a piece of cake. Will attach in a few
I'm having this problem too. Tried loading JL2 and KP1 (2 different versions) and still roaming. Beyond that, getting some random call silences and drops. Guess I'll be loading random modem drivers until I find a good one.
EDIT: I just figured out how to make roaming turn off. I'm in a GSM-only area. I went into the phone app, typed *#2263#, chose GSM, then chose 850 only. It took a second but then picked up a great ATT signal. For some reason, the phone was preferring to roam on 1900 (seen using *#0011#). Not sure what effect this will have if I go somewhere else, but I work from home so my location is pretty static.
Bleh, I'm getting desperate here, looks like I'm the only one experiencing this.
This seems to applies to any modem I've tried so far on 2.2.1 roms. I get excellent reception (3-4 bars H or 3G) and yet data doesn't flow through in some areas while still maintaining that excellent connection. Usually fails more when I am indoor although again, the reception is in theory great.
Seems to be happening more often when I'm using 850 band but that's not really an indicator. I tried JL2, KC1, JQ1 and JPG (all worked on 850 no problem) but I still experienced the same data issue. Flashed various Doc rom (now on his latest 2.2.1 with SpeedMod K13e kernel).
Could it be my SIM card that's damaged ? I've been experiencing this for a long time but I remember the phone being ok when I first got Froyo on it and definitely ok with 2.1
Any ideas ?
Just stumbled on Roger's Captivate "latest" modem CWM flashable, UXJL1. Would it be a good idea to try and flash this one ?
I am looking for people who have tried the p920h baseband and have had issues either with the respective lg software or using the cyanogenmod p920 build with it. I seem to get issues with the radio. It stops working and I can no longer receive/send calls or texts. I must reboot the phone. I am using the mexico bb with cm7 p920 build. It happens a lot at home where 3g signal is low and I switch between 3g and edge. This never happened with the stock froyo baseband.
Any feedback would be great.
Maybe this is why at&t is holding up our gingerbread update?
There is a video on you tube with an Aus user with the same problem, needs to reset his phone and then he gets full signal
http://www.youtube.com/watch?v=kCdQV8LpIIk
Hi everyone, noob here so dun wanna start a new thread with my question since it is related to this matter and I was wondering if anyone can help me because I really can't figure it out anymore.
I have an International GT-i9000 purchased with Hong Kong and system specs I have running are
Gingerbread.ZSJW4 (recently flashed the official ROM from Hong Kong cuz I am anal and want to keep the same languages)
Kernal: 2.6.35.7-I9000ZSJW4-CL1147074
[email protected] #2
Bandbase version: i9000ugkg3
And I use AT&T in New York (I know, worse plan to use in dead zone capital of the US)
I had flashed the ugkg3 modem on it because the JW1 modem that was with the official ROM wasn't working out for me and I had heard this modem was the best for my area. Before it would either not pick up a signal when coming up from underground or the signal just go dead, which did not happen when my phone was on Froyo (on Froyo I did not have 850mhz enabled and it worked alright outside and sometimes in the house)
At first, the KG3 modem worked wonderfully, I was able to receive data in my house and was on 3 bars (compared to none to one before). However, I now notice that while I do have full bars, I cannot receive or send messages or phone calls (even though my brother's Note is able to do all that and it was next to my phone).
I also happens when I am outside as well.
The other day I was standing in front of the AT&T store near where I am and I still don't pick up a signal.
Or it would lose the signal and never pick it up again.
Unless if I really can't use 850mhz on my phone, which does not make sense because AT&T uses 850mhz.
I am real hesistant to try another modem, and I cannot figure out if it is a hardware issue or network issue, or is it just the wrong modem?
Can someone please share any insight?
Radio GSM / Módem:
KF1 (Perfectly Changes 2g to 3g)
use this
kzkan said:
Radio GSM / Módem:
KF1 (Perfectly Changes 2g to 3g)
use this
Click to expand...
Click to collapse
works in ATT?
kzkan said:
Radio GSM / Módem:
KF1 (Perfectly Changes 2g to 3g)
use this
Click to expand...
Click to collapse
my other question is, phone is not ICS, and I found the nexus S one...will it still work?
and can I just extract out modem.bin and flash via ODIN ?(somehow my phone won't do CMW recovery...)