Hi, i have completed a update to XXJPK but when phone has completed i get the following error on screen,
Update medie, plesae wait
E:Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI me nu for format and reboot actions.
copy default media content failed
?
Why spam the dev board with your questions? There's 2/3 JPK threads, why not just post in there?
I looked but did not see and i thought the the purpose of a forum is to ask question and if someone knows the answer or where to find answer.
DemolitionManHD said:
I looked but did not see and i thought the the purpose of a forum is to ask question and if someone knows the answer or where to find answer.
Click to expand...
Click to collapse
Yea thts wht the purpose of this part of the forum.
Anyway, to answer your question, you ticked re-partition in Odin. This is what caused the error.
The fix is to flash back to JPC (or older Froyo release) then flash JPK on top and DO NOT tick re-partition.
(JPH and JP4 and JPK do not contain all the phone code which gets deleted if you do a repartition. They rely on inheriting it from an older firmware already on the phone_
Thank for your help, i will complete asap
Sent from my GT-I9000 using XDA App
I got that error as well but my phone has worked well ever since so I ignored it, what am I missing?
Frostfree said:
I got that error as well but my phone has worked well ever since so I ignored it, what am I missing?
Click to expand...
Click to collapse
You guys flashed with 803 pit. Do it with 512
Sent from my GT-I9000 using XDA App
Related
Well as the title says. My GT has died ..... Fuy to put a rom and I fault the burden of odin rom. Odin gave me FAILED. And where is the blue bar downloding stood. Remove the wire and give the keys and power vol-I got a tablet with a PC and a triangle in the middle. I did a total reset to odin and reloaded and I recognized the table with those marks mentioned and I reloaded. with the same result. I say good because if I load this rom will be posting JM6 say that fixes everything. odin Todal tells me the "reset" and "pass " say COOL! SOLVED. Nothing is further from the truth. I have been on the screen that says "GALAXY Tab" and there does not happen. Try the ROM put him "BROKEN V4"with the same fate .... Probe with the kernel of "overcome " not at all a kernel of MoDaCo for the theme of recovery if the recovery was installed and nothing in odin ... FAIL. The fact is that this might not dead yet it let me access the DOWLOADIG. I think there must be something BOOT.ini. but the ideas are beyond me. if they could resurrect a DHD. but as a tab ... if not with your help I can do little more
install the JM6 and I get the picture but then stays Galay SAMSUNG TAB AND DOWN ... not start see image of odin
sorry for my English but the google translator
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
spike1985 said:
Do you have Cwm recovery installed? Tried to clear caches?
send from my SGT with Overcome...
Click to expand...
Click to collapse
No. CWM ..... NOT installed
I'm trying with. md5 and this is pit: P1_add_hidden.pit
but will not start ....
edit: the. cfg not to put it .....
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
af974 said:
Go to overcome thread and download the guide attached there, read carrefull what inside and you will, probably, fix the problem.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
My Tab was once in a state like this with the exclamation mark and picture of the little pc. I believe it's fixable, and I also think that it's actually harder to permanently brick these things than would first seem. I remember I even had an error during repartitioning, surely that would have been curtains but it wasn't.
This was my experience, and in my post I link to another post that contains some useful information on getting out of that error: http://forum.xda-developers.com/showpost.php?p=12719559&postcount=13
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Use this link. Download modem file and full file. Then flash with pit in odin. It will work. Same thing happened to me.
As long as you can access downloading screen it's not dead.
Sent from my GT-P1000 using XDA Premium App
This medthod work for me
1. wait until the TAB discharge (about 1 Day)
2. Connect the tab to the computer
3. wait about 10 minutes
4.After boot please start odin
5.open odin and see status connect with odin and selcet pit file from your download
http://www.4shared.com/file/pThcn9Ml/P1000_new_Odin3_v17.html
After flash pit wait a minute your phone will reboot in to recover mode and restart
to samsung logo page
6.Flash roto firmware with ordin ( if can't flash with odin will change to Heimdall_1.1.1
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/KM2/Roto-KM2-Full-v1.zip
7.After finish reboot your phone and boot into roto rom
8.Go to recovery mode
9.Flash customer firmware ( I used Overcome 1.6.4 )
shoman24v said:
Try it like this
Uncheck repartition
Remove the pit file
Do not add anything for the 'Phone' and 'CSC' portion.
Just flash the PDA section.
See if that works.
Click to expand...
Click to collapse
FAIL!!!!!
thanks
I installed the kernel Overcome. this time it gave me failed to install but still no recovery. continues in the same state snif snif snif
all the above steps with "broken", JM6 JME have been nil .... BOOT.ini problem is I think
chemita said:
Where is the guide?? sorry my bad English and I translate by google ... if you make me so kind as to put the thread .... I give thank you very much
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Filgaliel said:
http://forum.xda-developers.com/attachment.php?attachmentid=585587&d=1304441485
Click to expand...
Click to collapse
you mean this part?. @Filgaliel
Please download the following files: You should download the NEW JMK-stock-safe.zip from the following link: http://www.multiupload.com/U88JTJ4P10 (if you’ve downloaded the JMK-stock-safe.zip prior to 21 April, please download this new version!)
You should download the Overcome ROM 1.6.4 (Overcome_v1.6.4_Full.zip) file from the following link: http://www.multiupload.com/GYOVUEW9P5
You should download the Overcome Kernel 2.1.6 (Overcome_Kernel_v2.1.6_OCUV_ODIN.tar) file from the following link: http://forum.xda-developers.com/attachment.php?attachmentid=585421&d=1304425298
You must have enough space on your internal storage (henceforth referred to as Internal SD, as opposed to the External S) So, please clear some space. A free space of about 4GB should suffice
Yes. Try that. It should work.
Filgaliel said:
Yes. Try that. It should work.
Click to expand...
Click to collapse
Well .... I'll try .... I work 10 pm to 6 am on Wednesday are 5 pm and I still do not sleep for trying to fix
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
antiochasylum said:
Sorry to hear this, however PLEASE READ THE FORUM RULES AND POST IN THE CORRECT FORUM.
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
@antiochasylum I'd like to fix my problem .... I think this in the right forum or not is a bad rom flash?? Not everyone is as smart as you
TheATHEiST said:
This is the Dev forum, not questions forum.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
It is SO COOL to have you policing the forums! I don't know what we would do without your valuable and always helpful input.
I am sure XDA would be a post-apocalyptic wasteland of massive proportions were it not for you being the glue holding it all together.
So THANK YOU.
antiochasylum said:
Sigh. I wish I was a moderator.
Click to expand...
Click to collapse
You´re not.
now **** out now and does not charge the battery .... uuuuffff amount a circus and I grow dwarf
I sent it into warranty because I removed the data cable while it was flashing (Odin Multi Downloader (Android) was writing in the black box and it was stuck at MIBIB)
It had 2.3.6 XWHTH/XWKT4 installed.
When I recieved it I noticed it has 2.2.1 XXKB1/XWKA8. When connected to ODIN, it detects it, it adds it but in the black box mentioned above is still Odin Multi Downloader (Android)
I am afraid to start the update because .. you know.. I don't wanna send it again 300 miles away from here.
Is it safe to proceed?
ODIN v4.38
Tass v.1.0
.tar/.md5 file OK
:angel:
why not use the Odin created for galaxy mini which show gt-s5570
... Can you explain me.. A little more.. Like a link or something? :/
Sent from my GT-S5570 using xda app-developers app
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
coolsandie said:
I guess this Tutorial (http://forum.xda-developers.com/showthread.php?t=1255305) should be fair enough.
Follow the steps as mentioned there, with your current downloaded firmware.
Click to expand...
Click to collapse
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]3/7703931556/
Ginga:| said:
Well... This is happening on my screen, it is the same like when the update failed.
I just want to know If I will not wreck my phone if I go with it.
www.flickr.com/photos/[email protected]/7703931556/
Click to expand...
Click to collapse
I guess it fine, whether it shows Android or GT-S5570 (happened to me at times) Just use Tass_v1.0.ops and the one package system, your screenshot looks fine.
Just check whether your downloaded firmware is good, just try extracting.
Even I got the same error that you've mentioned in your first post, that MIBIB error message. Just try again. If it doesn't work download another version and try flashing it.
EDIT: Probably you won't brick your device because Odin will not flash the firmware past that MIBIB error.
Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app
Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10
Please I really need some help
Thanks in advance.
please I need help
up
oussito said:
Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10 .
Click to expand...
Click to collapse
Tried this guide?
immortalneo said:
Tried this guide?
Click to expand...
Click to collapse
Yeah I used that guide to unbrick my Tab, it successfully unbricked but I got stuck in the samsung logo.
I tried to factory reset but that error showed up.
Well can I still flash it with dbdata?
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:
immortalneo said:
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:
Click to expand...
Click to collapse
It's done xD
thanks men
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
thanks its work for me to
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
I have the same problem.
May i know where to download dbdata.rfs.tar ?
After downloading what should I do? Do I need .PIT files?
Thank you
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.
ramsforums said:
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.
Click to expand...
Click to collapse
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.
Jarmezrocks said:
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.
Click to expand...
Click to collapse
Thanks James. I could able to recover
This is what I did
followed the blog galaxytabupdate.blogspot
downloaded all the files from the link on the blog except gingerbird. Ginger bird file for my carrier I got it from samsung-updates.com
my device booted in gengerbird.
thanks I hope you can recover your device
how did you do it and made odin reconize your tab
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
i am in exactly the same turn as you are after the update i cant use odin because odin wont reconize my phone i also want to use dbata.rfs an use ginger bread
please help i am begging you'
Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you about sharing the file to FIX the System Partition ;D
dbdata.rfs.tar only helped me .
Thanx very much, I managed to fix my tab too...
Where can I get the link
Hi guys sorry to post here, but I tried downloading the rfs file and the link's down, can you please reupload it or point me to where I can find it?
Hello! I've soft bricked my phone. The advantage is it is still going to download mode(vol down+home+power). Except this if I try to POWER ON/Recoverymode in any way..it shows the soft bricked logo( attached jpg). When it was running with original stock from SAMSUNG, I used semaphore/cynogenmod to upgrade it to ICS. Well, it worked fine but I did a mistake by again flashing semaphore to restore the data I took backup earlier. Then It hanged at SAMSUNG logo. Then I tried ODIN to flash it to the original stock, it throws an error messages on the screen, "E: failed to mount /dbdata(Invalid arguement) copying media files…. E: failed to mount /dbdata(file exits) E: copy_dbdata_media: can’t mount /dbdata your storage not prepared yet. Please use UI menu for format and reboot actions media files copy failed. ” and some more msges. Then I tried HEIMDALL to flash it to the original stock..Again falied. Now it went to softbrick... Is there any solution for this or now the phone is only meant for PAPER WEIGHT at this stage. Sorry for the long story...I thought this description wil give you clear picture where I screwed up ,so that you can suggest a proper solution. Thnx in advance.
HELP!!soft bricked GS-I9000 phone...
nagar975 said:
Hello! I've soft bricked my phone. The advantage is it is still going to download mode(vol down+home+power). Except this if I try to POWER ON/Recoverymode in any way..it shows the soft bricked logo( attached jpg). When it was running with original stock from SAMSUNG, I used semaphore/cynogenmod to upgrade it to ICS. Well, it worked fine but I did a mistake by again flashing semaphore to restore the data I took backup earlier. Then It hanged at SAMSUNG logo. Then I tried ODIN to flash it to the original stock, it throws an error messages on the screen, "E: failed to mount /dbdata(Invalid arguement) copying media files…. E: failed to mount /dbdata(file exits) E: copy_dbdata_media: can’t mount /dbdata your storage not prepared yet. Please use UI menu for format and reboot actions media files copy failed. ” and some more msges. Then I tried HEIMDALL to flash it to the original stock..Again falied. Now it went to softbrick... Is there any solution for this or now the phone is only meant for PAPER WEIGHT at this stage. Sorry for the long story...I thought this description wil give you clear picture where I screwed up ,so that you can suggest a proper solution. Thnx in advance.
Click to expand...
Click to collapse
Try flash 3 files Samsung ROM Gingerbread 2.3.6 (code, modem, csc) with odin e the original pit (512).
Does flashing 2.3.6 via Odin, help you ...
freakymod2120 said:
Does flashing 2.3.6 via Odin, help you ...
Click to expand...
Click to collapse
@minghi1 : Where can I get the original pit/ firmware (I suppose FULL STOCK) for GALAXY S-GT I9000. I googled it, No luck! Could you help me... Thnx in advance.
@freakymod2120 : No It didnt helped me....
nagar975 said:
@minghi1 : Where can I get the original pit/ firmware (I suppose FULL STOCK) for GALAXY S-GT I9000. I googled it, No luck! Could you help me... Thnx in advance.
@freakymod2120 : No It didnt helped me....
Click to expand...
Click to collapse
you can use a i9000 rescue kit from MY Android collections or flash the JVU with Pit from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
And now after help of xsenman....do you have a working device?
nagar975 said:
@minghi1 : Where can I get the original pit/ firmware (I suppose FULL STOCK) for GALAXY S-GT I9000. I googled it, No luck! Could you help me... Thnx in advance.
@freakymod2120 : No It didnt helped me....
Click to expand...
Click to collapse
freakymod2120 said:
And now after help of xsenman....do you have a working device?
Click to expand...
Click to collapse
@freakymod2120 : No Luck!! Please help me...
nagar975 said:
@freakymod2120 : No Luck!! Please help me...
Click to expand...
Click to collapse
You need to read this and links in it, most likely you had lagfix, or you had converted your SD card to a different format , such that your SD card is not usable by stock ROMs., so you may nee to use an Ext SD card ( partitioned into two) to get your phone working first than try to recover your internal SD card..
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
updates
freakymod2120 said:
Does flashing 2.3.6 via Odin, help you ...
Click to expand...
Click to collapse
hello,
i am planning to update my galaxy s i9000 but i'm little confuse in selecting the custom roms.can anyone tell me which rom and kernel i should use that can give better perfomence and prevents extra Battery drainage.
thank you.
If you want stable-Version... CM 10.1.3
instead nightly ... ==> CM 10.2
and optional flash semaphore-kernel ...but you haven`t to flash a kernel...CM 10.2 has a great one i think ...
kumar shivam said:
hello,
i am planning to update my galaxy s i9000 but i'm little confuse in selecting the custom roms.can anyone tell me which rom and kernel i should use that can give better perfomence and prevents extra Battery drainage.
thank you.
Click to expand...
Click to collapse
freakymod2120 said:
If you want stable-Version... CM 10.1.3
instead nightly ... ==> CM 10.2
and optional flash semaphore-kernel ...but you haven`t to flash a kernel...CM 10.2 has a great one i think ...
Click to expand...
Click to collapse
what you think about thinking bridge??is it good??
Sorry never heard of them ...
kumar shivam said:
what you think about thinking bridge??is it good??
Click to expand...
Click to collapse